• icon-wishlist
  • icon-cart
Voir tous les produits DEWALT

Machine à jointer Dewalt, 6,5 A

Article #0834103 Modèle #DW682K Format 6.5Ax115V
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.


Travaillez les bois les plus durs avec cette biscuiteuse équipée d'un moteur de 6,5 A et 10 000 tr/min. La semelle en aluminium robuste et lisse de cet outil peut être attachée pour effectuer des tâches sur place sans marquer les surfaces. Des attaches antidérapantes rétractables aideront à maintenir en place votre travail. La biscuiteuse vient avec une lame carburée à 6 dents, un déflecteur et un sac à poussière, un adaptateur pour aspirateur, une clé et un coffret de transport. Garantie limitée de trois ans.


6,5 A
Tours par minute
10 000
Capacité de coupe
20 mm
Diamètre de l'arbre
Dimensions des biscuits
00, 10, 20
Lame au carbure, sac de poussière, adaptateur d'aspirateur, clé Torx®, clé et boîtier de transport.
90 jours pour remboursement, 1 an contrat de service, 3 ans de garantie limitée
0° - 90°

Produits fréquemment achetés ensemble

Lisière à 6 prises, protection contre surtensions, 6', jaune icon-wishlist
Lisière à 6 prises, protection contre surtensions, 6', jaune
Format 1.8M
Article #32045053
Adaptateur pour protection DDFT portative, 1800 W, 15 A icon-wishlist
Adaptateur pour protection DDFT portative, 1800 W, 15 A
Article #32045050
Cordon de rallonge électrique, 12/3, 25', rouge icon-wishlist
Cordon de rallonge électrique, 12/3, 25', rouge
Format 12/3 25'
Article #74045239
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Machine à jointer Dewalt, 6,5 A est évalué 4.5 de 5 de 65.
Rated 5 de 5 de par Second Best Plate Joiner Having used plate joiners for years ( my first was a Lamello Top 10) I have a great opinion of this tool. I compare all biscuit cutters with Lamello tools. I have used many other brands and none compare as well as the DeWalt. It is easy to index with center marks on the face and base. The anti-slip pins on the face work well and are spring loaded. It plunges easily and the switch is well located. I lean towards DeWalt tools anyway but comparing the price of this joiner to the price of a Lamello joiner makes this a remarkable value. This is easily the second best biscuit joiner made. Sorry, the extremely expensive Lamello biscuit joiners still set the mark.
Date de publication: 2015-04-21
Rated 5 de 5 de par Easy to use This purchase is to replace my old one stolen off a jobsite. The tool is exactly the same as my old one which I had owned for 15 years plus. I had read the other reviewers comments on the adjustments. However, I have not had the same issues, maybe after all this time I am just used to the tool. Use this tool for all kinds of millwork joining on the job site from mitered casing to cabinet doors, wood glueing etc.. Tool just goes and does its job. Very reliable. The old one would have probably gone forever, but its not to be. Has plenty of power and I have always liked the smoothness of the plunge trigger action. Great tool real work horse,
Date de publication: 2019-12-29
Rated 5 de 5 de par Great Product This Joiner is to easy to use. the bag catcher only gets cloged when you go to fast during cuts. I used it all day long, and as long as you start the joiner before you make the cut it will not clog the catcher on the #20 setting. SLOW DOWN!! If you have ever used any other joiners you will wish you had this dewalt. I am very pleased with it. No product is going to be 100%. I give it 5.
Date de publication: 2012-01-03
Rated 5 de 5 de par As a biscut rookie, it worked like a charm. First time using a biscut cutter - for a large picture framing project. Easy to understand. A pleasure to use.
Date de publication: 2014-01-07
Rated 2 de 5 de par sloppy fence yields uneven cuts I own six other Dewalt tools and have been happy with all of them. This one I was not happy with. The angle adjustment for the fence is only on the left side leaving the right side unsupported. It also appeared that the pivot point on the right side of the fence was sloppy. This caused the right side of the fence to flex upward making the right side of the cut lower by 0.015". With the opposite side of your biscuit being lower on the other end the joint took on an X configuration. I used a piece of duct tape and a piece of masking tape to shim the right side of the fence 0.015" but, that should not be necessary. The rest of the tool seems to be up to the Dewalt standards I am accustomed tool. However, the fence is a critical part to the accuracy of this tool and is not acceptable.
Date de publication: 2018-07-14
Rated 4 de 5 de par Great tool, overlooked design criteria You should be proud that you have found a second application for the 4 1/2" grinder motor. I own roughly 30 DeWALT tools, corded and cordless, and very much enjoy them all for their usefulness and durability. I have been updating to Li Ion tools of late. As a plate joiner you may have overlooked the design issue of the motor cooling slots. The vent slots direct the air flow directly into the eyes of the operator when aligning the tool to cut the biscuit slot. I was wearing safety glasses but the air flow was still more than my eyes could accommodate. A full face shield helps but is annoyingly inconvenient. Looks like a simple plate on the left side and top would help greatly to redirect the air flow away from the operators face. I don't think this would cause undo restriction of the air flow as the motor is not working as hard as when used as a grinder.
Date de publication: 2018-01-07
Rated 5 de 5 de par I bought this to use building a deck with the FastenMaster VersaClip system for hidden fasteners. This thing is great!! My college daughter, who has never really used power tools, took all of 5 seconds to become proficient with it. Now she is doing most of the slot cutting! Easy set up. rack and pinion adjustments, and works great!!
Date de publication: 2014-06-04
Rated 5 de 5 de par Well worth the money This is a great tool, comes with great instructions. Easy to set up and use. The only fault I have is with the dust collection bag, you might want to discard the bag and use the supplied adapter to hook it up to your dust collection system as the bag tends to clog very easy. Other than the bag issue, well worth the money.
Date de publication: 2013-07-30
  • y_2020, m_8, d_10, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_65
  • loc_fr_CA, sid_0834103, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms