• icon-wishlist
  • icon-cart
Voir tous les produits INSTA-PLUMB

Coude en « J », 1 1/2", blanc

Article #12365868 Modèle #10400QLK Format 1 1/2"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.
icon-wishlist

Description

Ce coude en « J » est idéal pour les zones difficiles à atteindre ou confinées sous l'évier. Il est conçu pour être utilisé avec un drain. Son installation est simple et rapide; nul besoin d'écrous ou de rondelles traditionnels. Le tuyau comprend un outil d'installation facile à utiliser. Il ne doit pas être utilisé avec des tuyaux en laiton.

Caractéristiques

Composante
Polypropylène
Intérieur/Extérieur
Intérieur
Inclus
Outil d'installation
Couleur
Blanc
Format
1 1/2" (3,8 cm)
Type
Coude en « J »
Quantité par paquet
1

Vous pourriez aussi aimer

Renvoi de lavabo icon-wishlist
LUXO MARBRE
Renvoi de lavabo
Format 10x2 3/4"
Détails
Article #6559087
Drain de baignoire autoportante « F2 », ABS, noir icon-wishlist
MAAX
Drain de baignoire autoportante « F2 », ABS, noir
 
Détails
Article #06385324
Retour d'eau avec débordement icon-wishlist
LUXO MARBRE
Retour d'eau avec débordement
 
Détails
Article #65595189
Retour d'eau avec débordement icon-wishlist
LUXO MARBRE
Retour d'eau avec débordement
 
Détails
Article #65595188
Renvoi de lavabo icon-wishlist
LUXO MARBRE
Renvoi de lavabo
Format 12x7x3"
Détails
Article #6559095
Connecteur de lavabo icon-wishlist
LUXO MARBRE
Connecteur de lavabo
Format 3x1/2"
Détails
Article #6559086
Renvoi de lavabo icon-wishlist
LUXO MARBRE
Renvoi de lavabo
Format 16x7x3"
Détails
Article #6559085
Bonde ronde pour lavabo, 1 1/4", chrome icon-wishlist
PLUMBPAK
Bonde ronde pour lavabo, 1 1/4", chrome
 
Détails
Article #12365577
Rondelle, polyéthylène, 1 1/2", blanc icon-wishlist
PLUMBPAK
Rondelle, polyéthylène, 1 1/2", blanc
Format 1 1/2"
Détails
Article #12365411
Crépine d'évier de cuisine, 4 1/2", inox icon-wishlist
MASTER PLUMBER
Crépine d'évier de cuisine, 4 1/2", inox
 
Détails
Article #67845897
Robinet mural de bain icon-wishlist
PLUMBPAK
Robinet mural de bain
Format 1/2"
Détails
Article #12365319
Écrou coulissant et rondelle, laiton, 1 1/2'' icon-wishlist
PLUMBPAK
Écrou coulissant et rondelle, laiton, 1 1/2''
Format 1 1/2"
Détails
Article #12365374
Écrou coulissant, ABS, 1 1/2", noir icon-wishlist
PLUMBPAK
Écrou coulissant, ABS, 1 1/2", noir
Format 1 1/2"
Détails
Article #12365485
Cartouche pour trop-plein de bain,"Footlok", plastique, chrome icon-wishlist
PLUMBPAK
Cartouche pour trop-plein de bain,"Footlok", plastique, chrome
 
Détails
Article #1236729
Trop-plein pour bain 1 1/2 po icon-wishlist
BELANGER UPT
Trop-plein pour bain 1 1/2 po
Format 1 1/2"
Détails
Article #1236406
Crépine pour évier de cuisine, 3 1/2", acier inoxydable icon-wishlist
PLUMBPAK
Crépine pour évier de cuisine, 3 1/2", acier inoxydable
Format 3 1/2"
Détails
Article #12365474
Bonde mécanique avec évent, 1 1/4" X 8", plastique, chrome icon-wishlist
PLUMBPAK
Bonde mécanique avec évent, 1 1/4" X 8", plastique, chrome
Format 1 1/4x8"
Détails
Article #12365369
Rondelles pour tuyau, 3/4", paquet de 12 icon-wishlist
MASTER PLUMBER
Rondelles pour tuyau, 3/4", paquet de 12
Format 3/4"x12PK
Détails
Article #6784364
Trop-plein de bain en ABS 1 1/2 po icon-wishlist
BELANGER
Trop-plein de bain en ABS 1 1/2 po
Format 1 1/2"
Détails
Article #12365215
Bonde ronde de lavabo, 1 1/4" X 5", laiton, chrome icon-wishlist
PLUMBPAK
Bonde ronde de lavabo, 1 1/4" X 5", laiton, chrome
Format 1 1/4x5"
Détails
Article #12365501
Rondelle biseauté, polyéthylène, 1 1/2'', paquet de 2 icon-wishlist
PLUMBPAK
Rondelle biseauté, polyéthylène, 1 1/2'', paquet de 2
Format 1 1/2" 2PK
Détails
Article #12365386
Bonde de lavabo mécanique, 1 1/4" X 8", laiton, chrome icon-wishlist
PLUMBPAK
Bonde de lavabo mécanique, 1 1/4" X 8", laiton, chrome
Format 1 1/4x8"
Détails
Article #12365370
Bonde ronde pour lavabo, monopièce, 1 1/4" X 5", laiton, chrome icon-wishlist
PLUMBPAK
Bonde ronde pour lavabo, monopièce, 1 1/4" X 5", laiton, chrome
Format 1 1/4x5"
Détails
Article #12365344
Bonde ronde pour lavabo, 3 pièces, 1 1/4" X 6", laiton, chrome icon-wishlist
PLUMBPAK
Bonde ronde pour lavabo, 3 pièces, 1 1/4" X 6", laiton, chrome
Format 1 1/4x6"
Détails
Article #12365345
Écrou coulissant en ABS, 1 1/4'', noir icon-wishlist
PLUMBPAK
Écrou coulissant en ABS, 1 1/4'', noir
Format 1 1/4"
Détails
Article #12365486
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Coude en « J », 1 1/2", blanc est évalué 4.8 de 5 de 27.
Rated 5 de 5 de par Plumbing just got easier I have a bathtub that has a drain that is almost impossible to reach and it needs replacing. I was really putting it off because I would have to tear out part of the ceiling in the basement to get to it. This J bend changed that. I was able to, by feel, take out the old extension and simply push the new one into place. I played with it for a while and it is very easy to use. Just push it in and it is connected. It is also made of a thick plastic that should last longer than I will. I will use this again if I need to change sinks or tub drains. [This review was collected as part of a promotion.]
Date de publication: 2018-12-07
Rated 4 de 5 de par installs without tools the j-bend is designed to be installed without tools. The upper joint is a push and click joint. The part also comes with a plastic tool to release the joint when/if the need arises. The instructions are well written and easy to understand. The part works well as designed and is easy to install IF the directions are followed. It is designed for drains ONLY as it is not rated for water pressure. As it has been recently installed long term quality is unknown. [This review was collected as part of a promotion.]
Date de publication: 2018-12-09
Rated 5 de 5 de par Quality Product I’ve used plastic drain fittings before, and wasn’t really a fan, but the fittings from Keeney are a much higher quality. The plastic is a thicker gauge making them more solid. I also liked the easy install feature. A big plus is the removal tool is included so if you make a mistake in your alignment and need to remove, there is no need to return to the store and buy the tool. I used both the J bend and a 12” extension tube and had no issues with either. [This review was collected as part of a promotion.]
Date de publication: 2018-12-07
Rated 5 de 5 de par Solid, easy install Normally I just use the cheap oatey sink traps but I might use this in the future, its really solid and seems more fool proof. And it disconnects easily. [This review was collected as part of a promotion.]
Date de publication: 2018-12-04
Rated 5 de 5 de par Plumbing made simple Plumbing made simple Press fit a watertight connection without glues and primers. Do a quick plumbing trap repair, for home plumbers this problem comes up years after the stored primer and glue have dried up! I was sent two items from Keeney that has about a 12 undersink fittings one 12 inch extension tube and one J tube(trap). Checking the J fitting against the original showed it was about the same dimensions J pipe still has the standard threaded fitting at the output. Standard thin wall pipe with a very smooth finish, part of the sealing depends on square cut end and no scraches on the pipe. O-ring and ss should work if put together carefully, no sharp edges or corrosive maintenance chemicals used. Keeney includes a tool for fast disassembly, can't do that using a glued fitting, it's separation depends on releasing the stainless steel spring that holds the seal. They have a good video on cutting and assembly at https://www.keeneymfg.com/installation_videos/40-Insta-Plumb Measure-cut-push in then hand tighten threaded joints and job is finished. [This review was collected as part of a promotion.]
Date de publication: 2018-12-07
Rated 4 de 5 de par SHARKBITE style drain trap - surprise! When I got this I thought I was getting a "regular" trap. This co put the HIGHTECH push-style fitting on the top. Therefore, all you have to do is push this baby over the 1 1/2 drain pipe that comes down from a sink. I am all for trying to simplify. However, to remove, you have to keep a "C" clip handy to remove this fitting. I would have given it FIVE STARS if a "release" ring would have been built in. [This review was collected as part of a promotion.]
Date de publication: 2018-12-17
Rated 5 de 5 de par Gread product for quick repairs This extension is made in China, but seems to be of good quality. The "bite" tangs that lock pieces together are solid, and the o-ring seems to provide a positive seal. No tools are required for assembly. There is an included "C" clip of sorts can be used to release the pieces after assembly if desired. Overall this seems well made and offers a simple and quick solution to making plumbing repairs. [This review was collected as part of a promotion.]
Date de publication: 2019-01-11
Rated 5 de 5 de par 1 1/2 inch insta plumb J bend Very simple to use. Cut connection to length, slide fitting into place. No adhesive needed as advertised. Removal tool allows easy disconnection or rotation to line up connections. No leaking around joint so far. Plastic fittings can be cleaned and reused since no adhesive is used, saving time and money in the long run. Website videos useful to see how different kinds of connections work. [This review was collected as part of a promotion.]
Date de publication: 2019-01-05
  • y_2020, m_4, d_4, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_fr_CA, sid_12365868, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT