• icon-wishlist
  • icon-cart
Voir tous les produits GENERAL

Guide de contour, 6 po x 3 1/2 po

Article #0121109 Modèle #837
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.

Guide de contour, 6 po x 3 1/2 po

icon-wishlist

Description

Cet outil de guidage pour les contours facilite l'installation de moquette et de linoléum, les projets de travail du bois et les autres opérations demandant une taille adaptée aux contours. L'outil de mesure de contour est doté de tiges d'acier inoxydable que vous pouvez glisser et adapter aux surfaces irrégulières. Utilisez ce guide pour faciliter la confection de patrons, de moules, de prototypes, et pour marquer les lignes directrices.

Caractéristiques

Largeur
3 1/2 po (8,89 cm)
Longueur
6 po (15,24 cm)
Style
Portée de 5 1/4 po
Type
Guide de contour
Utilisations
Pour ajuster la moquette, les tuiles de plancher et le linoléum. Fabriquer des patrons et des moules. Marquer des lignes directrices
Emballage
1 unité

Vous pourriez aussi aimer

eco
Foret droit de toupie en carbure, 3/4 po x 1/4 po icon-wishlist
EXCHANGE-A-BLADE
Foret droit de toupie en carbure, 3/4 po x 1/4 po
Format 3/4"xTI1/4"
Détails
Article #34595445
eco
FORET À TOUPIE BAGUETTE 1/4" icon-wishlist
EXCHANGE-A-BLADE
FORET À TOUPIE BAGUETTE 1/4"
Format 1/4"xTI1/4"
Détails
Article #34595446
eco
FORET À TOUPIE BAGUETTE 3/8" icon-wishlist
EXCHANGE-A-BLADE
FORET À TOUPIE BAGUETTE 3/8"
Format 3/8"xTI1/4"
Détails
Article #34595447
FORET À TOUPIE icon-wishlist
FREUD
FORET À TOUPIE
Format 1/4X1"
Détails
Article #0696053
Foret à toupie icon-wishlist
FREUD
Foret à toupie
Format 1/4"
Détails
Article #0696027
eco
Foret droit de toupie en carbure, 5/16 po x 1/4 po icon-wishlist
EXCHANGE-A-BLADE
Foret droit de toupie en carbure, 5/16 po x 1/4 po
Format 5/16"xTI1/4"
Détails
Article #34595441
eco
Forêt à toupie 1/2" X 1/4", queue d'arronde, carbure, échangeable icon-wishlist
EXCHANGE-A-BLADE
Forêt à toupie 1/2" X 1/4", queue d'arronde, carbure, échangeable
Format 1/2"xTI1/4"
Détails
Article #34595448
FORET À TOUPIE icon-wishlist
FREUD
FORET À TOUPIE
Format 3/8"
Détails
Article #0696055
eco
Foret droit de toupie en carbure, 1/2 po x 1/2 po icon-wishlist
EXCHANGE-A-BLADE
Foret droit de toupie en carbure, 1/2 po x 1/2 po
Format 1/2"xTI1/2"
Détails
Article #34595466
FORET À TOUPIE icon-wishlist
FREUD
FORET À TOUPIE
Format 1/2x1/2"
Détails
Article #0696087
eco
FORET À TOUPIE AFFLEUREMENT 1/2" icon-wishlist
EXCHANGE-A-BLADE
FORET À TOUPIE AFFLEUREMENT 1/2"
Format 1/2"xTI1/4"
Détails
Article #34595452
Foret à toupie icon-wishlist
FREUD
Foret à toupie
Format 5/16"
Détails
Article #0696028
FORET À TOUPIE icon-wishlist
FREUD
FORET À TOUPIE
Format 1 1/4"xTI1/4"
Détails
Article #06965090
Foret à toupie chanfreiner de 23/32'' icon-wishlist
FREUD
Foret à toupie chanfreiner de 23/32''
Format 23/32xT1/4"
Détails
Article #06965019
eco
Foret droit de toupie en carbure, 3/8 po x 1/4 po icon-wishlist
EXCHANGE-A-BLADE
Foret droit de toupie en carbure, 3/8 po x 1/4 po
Format 3/8"xTI1/4"
Détails
Article #34595442
eco
FORET À TOUPIE RAINURE 5/32" icon-wishlist
EXCHANGE-A-BLADE
FORET À TOUPIE RAINURE 5/32"
Format 5/32"xTI1/4"
Détails
Article #34595462
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 2ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Guide de contour, 6 po x 3 1/2 po est évalué 4.2 de 5 de 71.
Rated 5 de 5 de par I can measure around corners I was trying to measure around a musket barrel to cut openings In a supporting cross piece in a wooden rifle box used to transport the musket to Civil War reenactments. I wanted a snug fit and couldn't figure out how to actually measure around the barrel and around the stock to get that snug fit. This contour gauge lets me mark off the exact size so the openings are perfectly custom made for each rifle. I like it. It works. I wish the end wires were stiffer so they would help hold the shape too.. The best way I've come up with for customizing fits around hard to measure objects.
Date de publication: 2015-08-06
Rated 5 de 5 de par Saved the Day This contour gauge was what the doctor ordered for my small project. I needed to fit the bottom of a baseboard over a threshold with a change in floor elevation and have it fit as snug as possible. In the old days I would have cut a template out of cardboard, being successful only after several tries. This contour gauge saved me a lot of time and worked better than I expected. Ihe "fingers" are very tight which make it hold its shape once formed so you can carry it without the worry of it changing shape. [This review was collected as part of a promotion.]
Date de publication: 2019-03-30
Rated 4 de 5 de par A good tool at the price, if you understand it. I bought the contour gauge to use in certain phases of violin making, and it has lived up to my expectations. A buyer should understand several things about how the tool works, and what its limitations are. The pins that slide through the bar are about 1/2 millimeter in diameter, so that (plus the user's skill) sets its margin of error. Things to remember include: 1. The width of the object you're measuring can be over-estimated by one to two pin-diameters, depending on the object's shape, and the placement of the gauge. 2. The outline of the object you're measuring will be stair-stepped (especially on the sides), since only the nearest corner of a pin touches any object that is not perpendicular to the pin. So if you're tracing around the outline, you have to use the most conservative possible interpretation of the shape. 3. If the pins were smaller, they would be more likely to bend out of shape, either distorting the contour or damaging the pins. Or both. 4. Finally, both the harmonica-like bar and the pins that slide through it are attracted by a magnet, so an occasional gentle wiping with light oil might extend the tool's useful lifespan. One improvement I'd like to see would be a sliding wedge that would temporarily lock the pins in place once the measurement is taken. Overall, if you can live with these limitations, it's a good tool, especially at the price.
Date de publication: 2013-10-19
Rated 5 de 5 de par Just right This is a perfect for getting the exact profile copy. I had one for years and bent the wires. Had to buy another. An essential tool in the box.
Date de publication: 2015-08-26
Rated 1 de 5 de par Contour What? Not user friendly. The pins will overlap or spread and will not stay aligned, preventing an accurate measurement. Never thought I'd ever say this about anything but the plastic version of this tool works much better. [This review was collected as part of a promotion.]
Date de publication: 2019-04-20
Rated 3 de 5 de par Needs HD For copying crown and similar trim, there isn't high enough detail to make this worth it. It'll get the approximate shape, but not enough detail to determine an ogee from and ogee and a fillet... which is why one would need this. Eyeballing the trim and sketching it on a piece of paper would accomplish more than this would get you. There also isn't a way to lock the pins in place once you have the general shape you want, so should it be accidentally bumped on the way to the trim department, you just lost your profile.
Date de publication: 2014-03-02
Rated 4 de 5 de par Great tool if you know how to use it This is a good tool for tile work as well as other jobs if you want to replicate the shape of moldings or find the profile of something. I have used it for guitar profiles as well as moldings.
Date de publication: 2014-02-24
Rated 4 de 5 de par Stainless Steel Contour-Gauge It seems to be a good product. I noticed the brassy metal end caps are pressed on vs. fasteners. It would be great to be able to increase the friction of the pins when they become loosened and not able to hold contour shapes. I would not place is a storage container or tool bag with heavier or odd shaped items be placed on top. I believe the contour fingers would bend if the item was of substantial weight. I look forward to using it more regularly [This review was collected as part of a promotion.]
Date de publication: 2019-07-20
  • y_2020, m_3, d_28, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_71
  • loc_fr_CA, sid_0121109, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT