• icon-wishlist
  • icon-cart
Voir tous les produits SPYDER

Grattoir 2 po en acier

Article #97895000 Modèle #00138 Format 2"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.

Grattoir 2 po en acier

icon-wishlist

Description

Grattoir pour enlever une surface dure. S'adapte à toutes les scies alternatives. Enlève la colle, le ciment, la céramique et autres. Garantie d'un an. 2 po. En acier.

Vous pourriez aussi aimer

Lames de scie alternative icon-wishlist
DEWALT
Lames de scie alternative
Format ST/12
Détails
Article #0027332
eco
LAME DE SCIE ALTERNATIVE 6" icon-wishlist
EXCHANGE-A-BLADE
LAME DE SCIE ALTERNATIVE 6"
Format 6"
Détails
Article #3459139
LAME DE SCIE ALTERNATIVE icon-wishlist
BOSCH
LAME DE SCIE ALTERNATIVE
Format 9"xPK5
Détails
Article #19835281
eco
LAME DE SCIE ALTERNATIVE 6" icon-wishlist
EXCHANGE-A-BLADE
LAME DE SCIE ALTERNATIVE 6"
Format 6"
Détails
Article #3459140
LAME DE SCIE ALTERNATIVE icon-wishlist
BOSCH
LAME DE SCIE ALTERNATIVE
Format 9"xPK5
Détails
Article #19835282
eco
LAME DE SCIE ALTERNATIVE 8" icon-wishlist
EXCHANGE-A-BLADE
LAME DE SCIE ALTERNATIVE 8"
Format 8"
Détails
Article #3459141
Ensemble de grattoirs en acier icon-wishlist
SPYDER
Ensemble de grattoirs en acier
Format 2,4,6"
Détails
Article #97895003
Ensemble lames de scie alternative tout usage bimétal bleu icon-wishlist
BOSCH
Ensemble lames de scie alternative tout usage bimétal bleu
Format PK10
Détails
Article #19835856
Lames de scie alternative, 10 DPP, 9 po, paquet de 5 icon-wishlist
DEWALT
Lames de scie alternative, 10 DPP, 9 po, paquet de 5
Format 9"xPK5
Détails
Article #00275809
eco
LAME DE SCIE ALTERNATIVE 12" icon-wishlist
EXCHANGE-A-BLADE
LAME DE SCIE ALTERNATIVE 12"
Format 12"
Détails
Article #3459142
LAME DE SCIE ALTERNATIVE 6" icon-wishlist
SPYDER
LAME DE SCIE ALTERNATIVE 6"
Format 6"xPK3
Détails
Article #97895018
LAME DE SCIE ALTERNATIVE 6" icon-wishlist
SPYDER
LAME DE SCIE ALTERNATIVE 6"
Format 6"
Détails
Article #97895005
Lames de scie alternative, 14/18 DPP, 6 po, paquet de 5 icon-wishlist
DEWALT
Lames de scie alternative, 14/18 DPP, 6 po, paquet de 5
Format 6"xPK5
Détails
Article #00275810
Lame de scie alternative, bimétal, 8" x 50 DPP, 5/pqt icon-wishlist
CRAFTSMAN
Lame de scie alternative, bimétal, 8" x 50 DPP, 5/pqt
Format 8"x5PK
Détails
Article #00276874
Lame de scie alternative, bimétal, 6" x 18 DPP, 5/pqt icon-wishlist
CRAFTSMAN
Lame de scie alternative, bimétal, 6" x 18 DPP, 5/pqt
Format 6"x5PK
Détails
Article #00276737
Lame de scie alternative, 18 DPP, 8 po icon-wishlist
DEWALT
Lame de scie alternative, 18 DPP, 8 po
Format 8"
Détails
Article #00275868
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Grattoir 2 po en acier est évalué 2.9 de 5 de 17.
Rated 5 de 5 de par Does the job if you do it correctly I bought this tool to help to remove 20 year old linoleum from my kitchen. Granted the linoleum was coming up mostly by pulling it, but when it wouldn't, the spyder scraper did the job. Just be sure you do it at a low angle and DO NOT put any perpendicular pressure on the scraper - that will probably cause it to break (even though that didn't happen for me). I also bought the Warner scraper and that paled in comparison to how fast the spyder did the job. I would recommend it to anyone who would want to cut the scraping time drastically. I ended up returning the Warner scraper the next day.
Date de publication: 2012-01-07
Rated 4 de 5 de par A Valuable Tool I like the blade, but it isn't quite stiff enough for the use I'm making of it. I'm scraping some fully cured and very hard epoxy resin and injection ports from a concrete floor (crack repair), and the blade flexes a bit too much to be the only tool I'll need. I'll still end up needing a hand grinder with an abrasive wheel to finish the job. But it is taking off the used ports and a lot of the resin which was smeared over/into the crack, which will mean less grinding to do. With resin this hard, I have to use a little more angle than the directions on the package suggest, and that makes the tool (blade mounted in the reciprocating saw) bounce a bit much if I'm not very careful.
Date de publication: 2013-05-30
Rated 1 de 5 de par Spyder Scraper 2" This product specifically states it is for use on removal of thin set. I purchased 2 and was able to remove about 5 square feet of thin set before I had broken both. I varied speed and did not exceed a 45 degree angle and both were broken with in 15 minutes. I would never suggest this item for thin set.
Date de publication: 2011-12-31
Rated 2 de 5 de par breaks too easy This product can work very well and does, but if it get too much pressure which is not very much it will snap like a toothpick. Best thing to do is to be able to grind it down shorter and drill a new hole with a cobalt bit where it attaches to the reciprocating saw if you want to extend the life of it, otherwise buy plenty of them and they are not exactly cheap.
Date de publication: 2013-11-26
Rated 1 de 5 de par Junk I broke two of these in about 15 minutes removing a small area of linoleum, one of the recommended uses on it's package. It was used at a low angle and with little pressure and still they broke. I would only recommend these blades if one would find themselves trapped in a large WET paper bag. Even then you should carry 2 or 3 of them.
Date de publication: 2013-02-16
Rated 3 de 5 de par Good for what it is for I used this for self adhesive tiles as there really is no other item out to get them up. It works really good bringing it up pretty fast. My only issue is if you go to high an angle it snaps at the tang area making the item useless. I have broken 2 so far due to this.
Date de publication: 2013-06-17
Rated 4 de 5 de par 2in spider blade This product works realy well for i used it for removeing tile grout off concreate
Date de publication: 2013-07-31
Rated 2 de 5 de par Not for heavy scraping This is NOT for any kind of heavy scraping. Light duty only. Needs to be made of much tougher steel, and thicker. Maybe bi-metal would help. Any heavy scraping, even at low angle of attack, will fatige break the shank where it enters the saw clamp jaws. Works ok for light stuff.
Date de publication: 2012-09-27
  • y_2019, m_11, d_12, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_fr_CA, sid_97895000, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT