• icon-wishlist
  • icon-cart
Voir tous les produits DEWALT

Gabarit de perçage pour porte DeWalt, douille réglable, scies-cloches sans arbre, lame bimétallique

N° d'article 0027250 N° de modèle D180004
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Installez des serrures sur des portes en métal et en bois avec ce kit d'installation de serrures de porte DeWalt. Il s'agit d'un ensemble de perçage de porte réglable qui est compatible avec différents types de portes. Ce kit bimétallique comprend un gabarit d'alignement personnalisé pour plus d'exactitude et de précision.

Caractéristiques

Couleur
Noir et jaune
Modèle
Verrou de porte
Composante
Bi-métal
Type
Ensemble d'installation

Vous pourriez aussi aimer

Ensemble de scie-cloche Spyder avec étui de rangement rigide, pointe de carbure, avec arbre, 14 pièces icon-wishlist
SPYDER
Ensemble de scie-cloche Spyder avec étui de rangement rigide, pointe de carbure, avec arbre, 14 pièces
Format 14MX
Détails
N° d'article 16415000
Lames pour scie alternative Spyder, ensemble de 14 pièces icon-wishlist
SPYDER
Lames pour scie alternative Spyder, ensemble de 14 pièces
Format 14MX
Détails
N° d'article 65165016
Scie-cloche industrielle qualité M3 recyclable et échangeable EAB, 4 1/4 po dia, coupe 1 5/8 po p., bimétal, sans arbre icon-wishlist
EXCHANGE-A-BLADE
Scie-cloche industrielle qualité M3 recyclable et échangeable EAB, 4 1/4 po dia, coupe 1 5/8 po p., bimétal, sans arbre
Format 4 1/4"
Détails
N° d'article 3459090
Ensemble scie-cloche Craftsman avec coffret de rangement, avec arbre, bimétallique, formats variés, 7 pièces icon-wishlist
CRAFTSMAN
Ensemble scie-cloche Craftsman avec coffret de rangement, avec arbre, bimétallique, formats variés, 7 pièces
Format 7MX
Détails
N° d'article 00276597
Ensemble de mèches plates courtes Spyder, acier rapide et revêtement d'oxyde noir, paquet de 6, boîtier ABS icon-wishlist
SPYDER
Ensemble de mèches plates courtes Spyder, acier rapide et revêtement d'oxyde noir, paquet de 6, boîtier ABS
Format 6MX
Détails
N° d'article 16415001
Ensemble emporte-pièce en acier de carbure Spyder, 11 pièces icon-wishlist
SPYDER
Ensemble emporte-pièce en acier de carbure Spyder, 11 pièces
Format 11MX
Détails
N° d'article 65165013
Scie-cloche EAB, 6 1/4 po dia, qualité M3, bimétallique, profondeur de coupe 1 5/8 po, blanche icon-wishlist
EXCHANGE-A-BLADE
Scie-cloche EAB, 6 1/4 po dia, qualité M3, bimétallique, profondeur de coupe 1 5/8 po, blanche
Format 6 1/4"
Détails
N° d'article 34595506
Ensemble d'installation de serrures de porte Craftsman, bimétallique, avec arbre, 6 pièces icon-wishlist
CRAFTSMAN
Ensemble d'installation de serrures de porte Craftsman, bimétallique, avec arbre, 6 pièces
 
Détails
N° d'article 00276956
Scie-cloche pointes diamantées EAB, 1/4 po dia, métal recyclable, pour utilisation avec de l'eau icon-wishlist
EXCHANGE-A-BLADE
Scie-cloche pointes diamantées EAB, 1/4 po dia, métal recyclable, pour utilisation avec de l'eau
Format 1/4"
Détails
N° d'article 34595593
Scie-cloche Craftsman, 4 po dia, bimétallique, sans arbre, noire icon-wishlist
CRAFTSMAN
Scie-cloche Craftsman, 4 po dia, bimétallique, sans arbre, noire
Format 4"
Détails
N° d'article 00276897
Scie emporte-pièce EAB Tool bimétal (M3), industriel, échangeable, 4 1/8" icon-wishlist
EXCHANGE-A-BLADE
Scie emporte-pièce EAB Tool bimétal (M3), industriel, échangeable, 4 1/8"
Format 4 1/8"
Détails
N° d'article 3459088
Scie-cloche industrielle qualité M3 recyclable et échangeable EAB, 6 po dia, coupe 1 5/8 po p., bimétal, sans arbre icon-wishlist
EXCHANGE-A-BLADE
Scie-cloche industrielle qualité M3 recyclable et échangeable EAB, 6 po dia, coupe 1 5/8 po p., bimétal, sans arbre
Format 6"
Détails
N° d'article 3459094
Scie-cloche industrielle qualité M3 recyclable et échangeable EAB, 4 po dia, coupe 1 5/8 po p., bimétal, sans arbre icon-wishlist
EXCHANGE-A-BLADE
Scie-cloche industrielle qualité M3 recyclable et échangeable EAB, 4 po dia, coupe 1 5/8 po p., bimétal, sans arbre
Format 4"
Détails
N° d'article 3459089
Mandrin hexagonal à changement rapide, échangeable, 3/8" icon-wishlist
EXCHANGE-A-BLADE
Mandrin hexagonal à changement rapide, échangeable, 3/8"
Format 3/8"
Détails
N° d'article 34595990
Scie-cloche diamantée EAB, 1 1/4 po dia, tige 1/4 po, universelle icon-wishlist
EXCHANGE-A-BLADE
Scie-cloche diamantée EAB, 1 1/4 po dia, tige 1/4 po, universelle
Format 1 1/4"
Détails
N° d'article 34595598
Ensemble d'installation de serrures de porte Craftsman, bimétallique, avec arbre, 6 pièces icon-wishlist
CRAFTSMAN
Ensemble d'installation de serrures de porte Craftsman, bimétallique, avec arbre, 6 pièces
 
Détails
N° d'article 00276832
Scie-cloche industrielle qualité M3 recyclable et échangeable EAB, 4 1/2 po dia, coupe 1 5/8 po p., bimétal, sans arbre icon-wishlist
EXCHANGE-A-BLADE
Scie-cloche industrielle qualité M3 recyclable et échangeable EAB, 4 1/2 po dia, coupe 1 5/8 po p., bimétal, sans arbre
Format 4 1/2"
Détails
N° d'article 3459091
Scie-cloche à grain diamanté EAB, 1 1/2 po dia, profondeur de coupe 1 po, changement rapide icon-wishlist
EXCHANGE-A-BLADE
Scie-cloche à grain diamanté EAB, 1 1/2 po dia, profondeur de coupe 1 po, changement rapide
Format 1 1/2"
Détails
N° d'article 34595600
Scie-cloche diamantée EAB, 1 po dia, profondeur de perçage 1 po icon-wishlist
EXCHANGE-A-BLADE
Scie-cloche diamantée EAB, 1 po dia, profondeur de perçage 1 po
Format 1"
Détails
N° d'article 34595597
Scie-cloche Speed Slot Lenox, 4 1/8 po dia, bimétallique, sans arbre icon-wishlist
LENOX
Scie-cloche Speed Slot Lenox, 4 1/8 po dia, bimétallique, sans arbre
Format 4 1/8"
Détails
N° d'article 79915372
Scie-cloche EAB, 5 1/4 po dia, qualité M3, bimétallique, profondeur de coupe 1 5/8 po icon-wishlist
EXCHANGE-A-BLADE
Scie-cloche EAB, 5 1/4 po dia, qualité M3, bimétallique, profondeur de coupe 1 5/8 po
Format 5 1/4"
Détails
N° d'article 34595501
Rallonge pour mèches de 3/8 po et 7/16 po EAB, 12 po L., double extrémité, acier icon-wishlist
EXCHANGE-A-BLADE
Rallonge pour mèches de 3/8 po et 7/16 po EAB, 12 po L., double extrémité, acier
Format 12"
Détails
N° d'article 34595495
Scie-cloche économique Craftsman, 2 po dia, bimétallique, avec arbre, universelle icon-wishlist
CRAFTSMAN
Scie-cloche économique Craftsman, 2 po dia, bimétallique, avec arbre, universelle
Format 2"
Détails
N° d'article 00276915
Scie emporte-pièce bimétal, 4 1/8 po icon-wishlist
DEWALT
Scie emporte-pièce bimétal, 4 1/8 po
Format 4 1/8"
Détails
N° d'article 0794122
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Gabarit de perçage pour porte DeWalt, douille réglable, scies-cloches sans arbre, lame bimétallique est évalué 4.2 de 5 de 105.
Rated 5 de 5 de par DeWalt bi-metal door lock installation kit After reading several other comments before purchasing, I did this: First of all, I ran a 1/2-20 tap back and forth with my fingers in the threads of both hole saws. It removed some paint over spray. then I put a small dab of grease (wheel bearing) on the mandril threads. I then sprayed both inside and outside of the hole saws with silicone spray. AS DIRECTED, drill the 1" hole first, then switch to the 2 1/8" hole next. I pulled both hole saws out 1/2 way thru to remove the build up of wood/metal inside of the round saw. then re-sprayed with silicone and finished the hole. Use some finesse while drilling. This tool does a terrific job.
Date de publication: 2012-10-05
Rated 5 de 5 de par Essential tool for anyone needing a new knob The doors in my house all either had missing hardware, mis-matched knobs (gold on one side, silver on the other),or no knobs at all. I ordered 9 brand new, antique looking knobs to go with the old doors... and found the holes in the doors were nowhere near big enough for modern knob hardware. I tried to use a holesaw to cut one, but it was a losing battle of sliding saw and gouged door. I picked up this unit, set the holes to the size needed, and had all nine doors cut and ready for knobs in less than 2 hours. Very, VERY slick. Worth the money even if I never ever use it again.
Date de publication: 2013-12-13
Rated 5 de 5 de par New lock-set, old door... We were remodeling our home office and that included a new handle for the door to the garage. (A solid core door, fire rated) But the existing set was a smaller hole than the new standard lock-set. But by using this Dewalt kit and saws I was able to align the existing bolt with the fixture and drill the new size hole for the late model lock-set. No filling the existing hole, just let the Dewalt guide the hole saw for a perfect fit. Made a nightmare into a sweet dream indeed. I considered another kit, but could see where the Dewalt was worth the little extra it cost. ($5 difference) I buy tools based on there suitability for the job at hand. And this worked better than I had hoped.
Date de publication: 2014-05-07
Rated 5 de 5 de par Great For Re-Drilling Metal Insulated Entry Door I decided to go with the Dewalt Door Lock Installation Kit, rather than the cheaper Irwin model, based on slightly better reviews. I do not regret that decision. First, the Dewalt kit is more heavy duty than the Irwin model. I liked the fact that it was clamped tight to the door, rather than screwed into the door, giving more stability while drilling. I only had to re-drill the deadbolt hole, as that was the only one that was smaller than the rest. After adjusting the backset to the correct length, and tightening down the clamp, the drilling went smooth. I set my drill to the highest speed, and kept a small amount of pressure, and the hole was widened within 10 seconds per side. A small amount of the plastic guide was shaved off, but not bad. There was little, to no movement of the plastic guide. The new deadbolt lined up perfectly, with minimal play. As others have stated, there are no instructions on how to separate the saw from the mandrel. Just remove the screw, holding the guide bit in the mandrel, stick a thin screwdriver through the slots of the hole saw, and use a wrench or channel locks to unthread the saw from the mandrel. To make things easier, I sprayed the threads of the mandrel with lubricant, before tightening the hole saw onto it. I can't comment on how well the guide, and saw hold up after multiple uses, but it worked great for my one time use. The saw still looks to be in perfect condition, and the plastic guide is just missing minimal plastic, inside the guide hole. I am satisfied with how it cut through my metal insulated entry door.
Date de publication: 2013-04-16
Rated 4 de 5 de par Spend the extra $$ [This review was collected as part of a promotion.] I initially bought the irwin hole saw kit that was a couple bucks less. Needless to say it didn't hold up on the first try. I returned that and exchanged for this one...well worth the extra $5 - especially if you are enlarging a hole. For a new hole in a new door maybe the irwin will work. But, the clamping action on this model kept it in place and it worked for 3 enlarging 3 deadbolt holes. If you are drilling into metal and have more than a couple doors to do, be sure to buy an extra hole saw bit. My only reason to downgrade was that the saw got stuck on the arbor to tightly that I couldnt unscrew it, thus resulting in another trip to the store for the 1" saw. Performance-wise, 5 stars.
Date de publication: 2018-12-29
Rated 4 de 5 de par Great purchase for ease of use. We live in an older house with original 1940's vintage doors, most of which were not cut completely out for modern door knobs. Since there is no material in the middle on the existing holes, a hole saw by itself will not work. With this jig, I can line up the cuts and put newer knobs in with ease. My complaint is with the arbor for the hole saws. For a couple extra dollars the easy change type arbor could be included. Other than that, it is a great product.
Date de publication: 2013-12-09
Rated 5 de 5 de par Simplified a complicated job. I recently had someone break into my home and had to install a dead bolt lock system. this tool made the job so easy. Great purchase! Cynthia from Portland, Maine
Date de publication: 2013-11-18
Rated 3 de 5 de par Stuck I bought this tool hoping it would make life easier while I change out 5 or 6 doors in my house. I used it last night. I get that the big bit has to be unscrewed for the smaller one to fit. But after sawing the hole, the thing from the heat of use, fused in such a way, I can't get the thing apart to use the smaller sized threaded thingy in the small hole saw. I have tried everything!!! Helllllllllllllllp! I want to move on.... I can't get off this one door because the tool "sticks" what to do?
Date de publication: 2019-02-13
  • y_2021, m_9, d_22, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_105
  • loc_fr_CA, sid_0027250, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT