• icon-wishlist
  • icon-cart
Voir tous les produits GREAT STUFF PRO

Fusil à mousse, Pro 14, noir

Article #56495017 Modèle #99046685
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Ce fusil à mousse Pro 14 de Great Stuff Pro procurera des travaux de précision et vous permettra d'atteindre plus facilement les espaces restreints. Construit en aluminium léger, il est résistant et facile à manipuler lors de l'utilisation. Ce fusil à mousse possède un mécanisme de contrôle de début qui distribue des cordons allant de 1/8'' à 3'' (0,3 cm à 7,2 cm). Vous apprécierez la maîtrise de la taille des perles, la précision des travaux et le rendement maximal avec un minimum de déchets que procure cet outil. Aucune coulée après application. Fonctionne avec tous les produits de la série Great Stuff Pro.

Caractéristiques

Composante
Aluminium
Type
Pistolet à mousse
Couleur
Noir
Épaisseur
Cordons de 1/8'' à 3'' (0,3 cm à 7,2 cm)
Modèle
Pro 14

Vous pourriez aussi aimer

Fusil à calfeutrer pour tube de 300ml icon-wishlist
FACTO
Fusil à calfeutrer pour tube de 300ml
Format 300ML
Détails
Article #82205015
Fusil à calfeutrer icon-wishlist
UBERHAUS
Fusil à calfeutrer
Format 300ML
Détails
Article #04325003
Fusil à calfeutrage icon-wishlist
BENNETT
Fusil à calfeutrage
Format 300ML
Détails
Article #8710013
Ensemble pour calfeutrage, 8 pièces icon-wishlist
DAP
Ensemble pour calfeutrage, 8 pièces
Format 8/PK
Détails
Article #04915178
Bouchons pour tube de calfeutrage (2 unités) icon-wishlist
SMARTCAP
Bouchons pour tube de calfeutrage (2 unités)
Format 4" 2MX
Détails
Article #06275001
Fusil à calfeutrer icon-wishlist
UBERHAUS
Fusil à calfeutrer
Format 800ML
Détails
Article #04325004
Fusil pour mousse économic icon-wishlist
ADFAST
Fusil pour mousse économic
 
Détails
Article #13485001
Ensemble d'outils de calfeutrage, Richard, plastique, 2/pqt icon-wishlist
RICHARD
Ensemble d'outils de calfeutrage, Richard, plastique, 2/pqt
Format 2/PK
Détails
Article #02715506
Pistolet à calfeutrer icon-wishlist
BENNETT
Pistolet à calfeutrer
Format 9" 300ML
Détails
Article #8710015
Tige à cliquet de fusil à calfeutrer robuste, chrome, 9'' icon-wishlist
HOLLAND
Tige à cliquet de fusil à calfeutrer robuste, chrome, 9''
 
Détails
Article #89945114
Bec pour plinthe icon-wishlist
ROBERTS
Bec pour plinthe
 
Détails
Article #35635046
Buse de remplacement pour fusil à mousse, noir, 10/pqt icon-wishlist
GREAT STUFF
Buse de remplacement pour fusil à mousse, noir, 10/pqt
Format 10PK
Détails
Article #56495011
Pistolet à calfeutrer icon-wishlist
BENNETT
Pistolet à calfeutrer
Format 800ML
Détails
Article #8710017
Pistolet pour mousse expansive icon-wishlist
Pistolet pour mousse expansive
 
Détails
Article #13485000
Ensemble pour scellant icon-wishlist
RCR
Ensemble pour scellant
Format 3MX
Détails
Article #5867020
Pistolet à calfeutrer icon-wishlist
BENNETT
Pistolet à calfeutrer
Format 13"
Détails
Article #8710016
Fusil à calfeutrage industriel icon-wishlist
BENNETT
Fusil à calfeutrage industriel
Format 300ML
Détails
Article #8710014
Rallonge Toolway pour pistolet à calfeutrer,  30 pouces icon-wishlist
PRO-GUN
Rallonge Toolway pour pistolet à calfeutrer, 30 pouces
 
Détails
Article #330677768
Grattoir à scellant icon-wishlist
RCR
Grattoir à scellant
 
Détails
Article #5867017
Fusil à calfeutrer icon-wishlist
DUTAB
Fusil à calfeutrer
Format CART.800ML
Détails
Article #1348052
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Fusil à mousse, Pro 14, noir est évalué 4.2 de 5 de 42.
Rated 4 de 5 de par Useful tool for large projects This is the first time I have used a spray foam gun. It is a huge time saver. The cans contain more product than a standard tube of caulk. I used 2.5 cans on my project and would likely have need 2 cases of caulk tubes to accomplish the same task. This gun is easy to use and saves your arms from the tough workout of using a caulk gun all day. My only complaint is that it is difficult to clean the very tip of the guns nozzle. The foam tends to harden around the tip requiring the use of a scrapper to get it all off. Overall I recommend this gun. It was worth the money. [This review was collected as part of a promotion.]
Date de publication: 2018-09-07
Rated 1 de 5 de par Falls Apart During Use When it works, it's good. Certainly it's better than the plastic straw dispenser. But my gun failed. When replacing a can of Great Stuff, the gray fitting on top came undone from the gun. The result: Great Stuff spewed everywhere, from the gun, from the can, covering my tools, stopping work for the day. Why did it come undone? And why is there no way to separate the black plastic top of the can from the gray fitting of the gun in the event of this happening? Clearly the gray fitting has a place for a wrench. But the black top of the can has tiny tabs which are too small to grab with pliers. I am frustrated with the poor design of this product. The application of spray insulation is troublesome enough, but to have a gun that comes undone during use is 100% unacceptable.
Date de publication: 2018-06-05
Rated 4 de 5 de par reusable foam gun Good gun if you take care of it. A couple of tips: 1) Protect the tip, don't ding it. Cover it with short tubing or the plastic straws to prevent damage. 2) Keep acetone or cleaner handy and wipe the tip after every use so there is no foam on the tip. 3) Get some clear vinyl tubing 3/8 OD, 1/4 ID because otherwise, it is almost impossible to fit this with the can upright into small spaces. 4) If you use this upside down (can facing down) it will work for about 3 seconds and then start spraying gas only. This will make the can last a lot shorter and you will cause it to dribble and make it difficult to use. If you need to use the can facing down use clear vinyl tubing. Good product, but could use some refinement and better instructions on the package. [This review was collected as part of a promotion.]
Date de publication: 2018-06-29
Rated 4 de 5 de par Good for tight spaces Attaching the Great Stuff pro cans was easy and quick. This gun allows you to place the correct size bead in both easy to reach and harder to reach places. The use of Great Stuff Pro cans and gun are basically for larger jobs as the cleanup for smaller jobs is not time efficient. For these smaller jobs I would recommend the regular Great Stuff cans. That being said, I would recommend this tool mainly because of the control it provides. The cleanup, as I said was a little messy, but for a larger job it is well worth it. The gun cleans up very well with the Great Stuff Gun Cleaner. If the gun is cleaned properly I have no doubt that it will last for years. It also allows you to leave the unused portion of the can attached (for no longer than 30 days without cleaning) or you can remove the partially used can for future use, or to change product type for other jobs. [This review was collected as part of a promotion.]
Date de publication: 2018-07-12
Rated 5 de 5 de par Works well when used as directed. First off: The Lowes title is not correct. This is not used with "blown-in Insulation", this is a foam dispensing gun that is designed to be used with the Dow Great Stuff Pro one-part expanding foam that comes in the big 24 ounce cans. FYI - The smaller single use cans, that come with the cheesy straw, will not work with this foam gun. My experience: I have the same can of foam attached to the gun for over 8 months and it still operates as well now as when the can was first attached. The trick is to leave the can attached to the gun when not in use. If the can is removed, the can will not work the next time and you will end up throwing it away. Also, to clean the gun you need to use the Dow Great Stuff Pro gun cleaner in the 12 ounce can. The gun has to be cleaned immediately when the can is removed or the foam will cure in the gun making the gun unusable. It takes about half of the 12 ounce can to thoroughly clean the gun. I was tired of using the disposable, messy, one-use cans that come with the straw. This gun allows for precise placement of the foam and the bead size can be set to match the size of the gap to be filled. Another tip: some small amount of foam will cure on the end of the nozzle if left on. Clean the tip of the nozzle after each use. I have successfully removed the cured foam from the tip using a utility knife. It cuts easily.
Date de publication: 2015-09-22
Rated 5 de 5 de par So much better than the red plastic spray tube This spray foam gun makes filling gaps so easy. It gets right into the spot you are spraying. No more red spray tube to fall out. The trigger is easily modulated to spray just the amount needed. When finished, just unscrew the foam and screw on the can of cleaner. Spray until all foam is out of gun. Any unused foam can be reattached later and not be wasted like the old style red tube spray. [This review was collected as part of a promotion.]
Date de publication: 2018-07-10
Rated 5 de 5 de par works great So far I have only used this gun a couple of times and it works great. Read other reviews and decided to purchase one for myself. Glad I did. Stops as soon as you release the trigger and the control you have vs the can with the fancy straw is worth the price and frustration.
Date de publication: 2015-12-12
Rated 5 de 5 de par Great 'stuff' Great spray foam gun, easy to use. Works great with all the great stuff products. Wife is happy with all the things I have gotten done because of this product. [This review was collected as part of a promotion.]
Date de publication: 2018-07-09
  • y_2020, m_5, d_30, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_42
  • loc_fr_CA, sid_56495017, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT