Rabais hebdomadaires
Voir tous les produits
BOSCH
Description
Le foret pour marteau perforateur SDS-plus(MD) Bulldog(MC) à entraînement hexagonal est idéal pour insérer des vis dans le béton. Ce foret s'emploie avec des systèmes de fixation de maçonnerie et des outils à douille d'entraînement hexagonale afin de percer le béton et d'insérer vos vis facilement. Il est pourvu d'une pointe en carbure plus durable à long terme que celle des forets standards.
Caractéristiques
Utilisations
Béton
Type
Foret pour perceuse à percussion
Longueur
Longueur utile 4 po (10.16 cm), longueur totale 7 po (17.78 cm)
Diamètre
5/32 po (0,39 cm)
Composante
Acier au carbone
Emballage
1 unité
Vous pourriez aussi aimer
Cartouche d'embouts EAB Tool 2" colorés, industriel, recyclable, assortis, 10/pqt
Format 2"x10MX
N° d'article 34595589
EXCHANGE-A-BLADE
Embout de tournevis EAB Tool coloré, tête carrée 2" #2, industriel, recyclable
Format #2x2"
N° d'article 34595562
EXCHANGE-A-BLADE
Embout de tournevis EAB Tool coloré, tête carrée 2 3/4" #2, industriel, recyclable
Format #2x2 3/4"
N° d'article 34595564
Cartouche d'embouts EAB Tool (2 pièces) colorés, tête carrée 2" #2, industriel, recyclable, 10/pqt
Format #2x2"x10MX
N° d'article 34595588
EXCHANGE-A-BLADE
Embout de tournevis EAB Tool coloré, tête carrée 4" #2, industriel, recyclable
Format #2x4"
N° d'article 34595558
EXCHANGE-A-BLADE
Cartouche de douilles EAB Tool assorties Impact, industriel, recyclable, 2", 5/pqt
Format 2"x5MX
N° d'article 09325002
BOSCH
Ensemble de forets Bosch à usages multiples, oxyde d'or, 29/bte
Format 29/BT
N° d'article 19836336
Embout de tournevis EAB Tool coloré, tête carrée 6" #2, industriel, recyclable
Format #2x6"
N° d'article 34595567
BOSCH
Foret à métal avec revêtement titane, 1/8'' x 2 3/4'', 2/pqt
Format 1/8x2 3/4"xPK2
N° d'article 13545442
BOSCH
Foret à maçonnerie Bosch, 1/4" x 6", acier au carbone
Format 1/4x6"
N° d'article 19836321
CRAFTSMAN
Foret en titane, 1/8", base hexagonale de 1/4", 2/pqt
Format 1/8"xTI1/4"
N° d'article 00276905
Foret pour marteau perforateur SDS-plus(MD) Bulldog(MC) est évalué
de
5 de
12.
Rated 5 de
5
de
Bernie par
Tough and durable
The bit was really sturdy - I bought two because I didn't want to risk getting half-way through the job and breaking the bit and then have to run back to the store, but it proved to be very tough. I never once felt like I was in danger of breaking the drill bit while drilling close to (100) 3.5" deep holes in the concrete footers for my deck, and returning the extra one was easy having the purchase on my MyLowes card. It went through the concrete like a hot knife through butter. Only complaint is that it's a very specialized tool, I rented the hammer drill for the weekend and the rental store didn't have the size bit I needed, so I ended up buying my own and now I have a bit but no drill...guess it's time to buy a hammer drill!
Date de publication: 2015-06-22
Rated 4 de
5
de
SSGDunigan par
Drills just fine, easily broken
To be fair, this is a good masonry bit and cut into the limestone blocks I was drilling just fine. However, at 5/32 this bit is too thin to be used with a larger SDS drill. I have a large sized drill and, even taking care to not to bend the shaft of the bit, it still broke. I don't know if the torque of the drill caused it or if I just didn't notice I was putting too much lateral pressure on the bit, whatever, it snapped like a twig after drilling five holes. Use this with smaller drills to reduce the chance of snapping. [This review was collected as part of a promotion.]
Date de publication: 2019-12-03
Rated 2 de
5
de
Tennis par
Will not last
This bit says that it is specifically designed to drill holes in concrete for installing screws
After one single hole, bit head got chewed up and could not drill anymore.
Very poor duarability
Date de publication: 2013-06-25
Rated 5 de
5
de
Nicklename par
Are You a Rotary Club Member?
I have a Bosch rotary hammer that these bits fit into. My old 5/32" was kaput. So I bot some more. And I can put these into my DeWalt hammer drill in a pinch. I prefer the bits that are made in Germany. Read the label.
Date de publication: 2013-09-28
Rated 1 de
5
de
Buzzard89 par
Failed on first hole...
I’m very disappointed in this bit. It broke on the very first hole. I was trying to drill a 2” deep hole in my garage pad (using my Bosch Bulldog) to anchor a work bench to the floor. Progress was slower than usual so I pulled back the bit and sure enough the chisel tip was GONE. I need another to drill about 75 holes in concrete block... it won’t be this one that’s for sure.
Date de publication: 2018-03-06
Rated 5 de
5
de
Rwag par
It did the job...
It drilled through a concrete block as if it were a stick of butter. However, I was using a Bosch bulldog rotary hammer drill. Not sure how it would do with a normal drill or a normal hammer drill. I probably would have bought a cheaper brand if Lowes had them in stock.
Date de publication: 2014-10-01
Rated 5 de
5
de
Oscar par
Well worth the money..
I bought this after going through two lesser quality bits that were supposed to be really good masonry bits. Ive drilled over 60 holes into concrete with this one and it still seems to be fine. Would highly recommend. [This review was collected as part of a promotion.]
Date de publication: 2019-04-14
Rated 5 de
5
de
Jonathan par
Good product
The bulldog in general is the best hammer drill I have used. All the bits do well I would recommend this to anyone [This review was collected as part of a promotion.]
Date de publication: 2019-12-10
LIENS PRATIQUES
Services aux consommateurs
À propos de RONA
