• icon-wishlist
  • icon-cart
Voir tous les produits DEWALT

Foret cobalt Dewalt, 1/2''

Article #00276348 Modèle #DWA1232 Format 1/2"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.
icon-wishlist

Description

Le foret de marque Dewalt est construit pour la vitesse et une longue vie, passant facilement et efficacement à travers les métaux durs. La mèche est munie d'une pointe en point de scission qui permet au foret de commencer le travail au contact et élimine la marche du trépan. Le cobalt à usage intensif offre une durée de vie 4 fois supérieure à celle de l'oxyde noir. L/embout livre une vitesse maximale et une durabilité aux applications d'acier inoxydable et autres métaux. Ce produit est couvert par une garantie de satisfaction de 30 jours.

Caractéristiques

Composante
Cobalt
Diamètre
1/2'' (1,27 cm)
Emballage
1 Unité
Garantie
Garantie de satisfaction de 30 jours
Utilisations
Métaux
Type de pointe
Point de scission

Vous pourriez aussi aimer

Foret pour verre et tuiles, 1/4 po icon-wishlist
BOSCH
Foret pour verre et tuiles, 1/4 po
Format 1/4"
Détails
Article #19835551
EMBOUT TOURNEVIS CAR/PH #2 X 2" icon-wishlist
EMBOUT TOURNEVIS CAR/PH #2 X 2"
Format 2"x10MX
Détails
Article #34595589
EMBOUT DE TOURNEVIS icon-wishlist
EXCHANGE-A-BLADE
EMBOUT DE TOURNEVIS
Format #2x2"
Détails
Article #34595562
ENSEMBLE D'EMBOUTS DE TOURNEVIS CARRÉ icon-wishlist
ENSEMBLE D'EMBOUTS DE TOURNEVIS CARRÉ
Format #2x2"x10MX
Détails
Article #34595588
EMBOUT DE TOURNEVIS icon-wishlist
EMBOUT DE TOURNEVIS
Format #2x6"
Détails
Article #34595567
EMBOUT DE TOURNEVIS icon-wishlist
EXCHANGE-A-BLADE
EMBOUT DE TOURNEVIS
Format #2x4"
Détails
Article #34595558
EMBOUT DE TOURNEVIS icon-wishlist
EXCHANGE-A-BLADE
EMBOUT DE TOURNEVIS
Format #2x2 3/4"
Détails
Article #34595564
Tourne-écrous et support pour visseuse à chocs, 2", 6 pièces icon-wishlist
EXCHANGE-A-BLADE
Tourne-écrous et support pour visseuse à chocs, 2", 6 pièces
Format 2"x5MX
Détails
Article #09325002
Foret pour verre et tuiles, 3/16 po icon-wishlist
BOSCH
Foret pour verre et tuiles, 3/16 po
Format 3/16"
Détails
Article #19835550
Ensemble de forets pour carreaux de verre icon-wishlist
BOSCH
Ensemble de forets pour carreaux de verre
Format 4MX
Détails
Article #19835447
Embouts pour tournevis Dewalt, 37 pièces icon-wishlist
DEWALT
Embouts pour tournevis Dewalt, 37 pièces
Format ST/37
Détails
Article #0794509
Foret à métal avec revêtement titane, 1/8'' x 2 3/4'', 2/pqt icon-wishlist
BOSCH
Foret à métal avec revêtement titane, 1/8'' x 2 3/4'', 2/pqt
Format 1/8x2 3/4"xPK2
Détails
Article #13545442
FORET À BÉTON icon-wishlist
BOSCH
FORET À BÉTON
Format 5/32x6"
Détails
Article #13545467
Ensemble de forêts, 13 pièces icon-wishlist
DEWALT
Ensemble de forêts, 13 pièces
Format 13MX
Détails
Article #00275548
FORET À BÉTON icon-wishlist
BOSCH
FORET À BÉTON
Format 5/32x6"
Détails
Article #1983025
FORET À BÉTON icon-wishlist
BOSCH
FORET À BÉTON
Format 3/16x6"
Détails
Article #1983026
Foret en titane, 1/8", base hexagonale de 1/4", 2/pqt icon-wishlist
CRAFTSMAN
Foret en titane, 1/8", base hexagonale de 1/4", 2/pqt
Format 1/8"xTI1/4"
Détails
Article #00276905
Foret pour verre et céramique, 5/16'' icon-wishlist
BOSCH
Foret pour verre et céramique, 5/16''
Format 5/16"
Détails
Article #19835552
Foret plat Daredevil(TM) régulier, 3/4'' x 6'' icon-wishlist
BOSCH
Foret plat Daredevil(TM) régulier, 3/4'' x 6''
Format 3/4"
Détails
Article #19835687
Ensemble de forets Bosch à usages multiples, oxyde d'or, 29/bte icon-wishlist
BOSCH
Ensemble de forets Bosch à usages multiples, oxyde d'or, 29/bte
Format 29/BT
Détails
Article #19836336
FORET À BÉTON icon-wishlist
BOSCH
FORET À BÉTON
Format 3/16x6"
Détails
Article #13545470
Foret à fraiser icon-wishlist
WOLFCRAFT
Foret à fraiser
Format #8
Détails
Article #1137169
Foret à métal en cobalt, 1/8'' x 2 3/4'' icon-wishlist
BOSCH
Foret à métal en cobalt, 1/8'' x 2 3/4''
Format 1/8x2 3/4"
Détails
Article #19835213
FORET À BÉTON icon-wishlist
BOSCH
FORET À BÉTON
Format 3/16x3"
Détails
Article #13545469
Foret plat Daredevil(TM) régulier, 1 1/2'' x 6'' icon-wishlist
BOSCH
Foret plat Daredevil(TM) régulier, 1 1/2'' x 6''
Format 1 1/2"
Détails
Article #19835692
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Foret cobalt Dewalt, 1/2'' est évalué 4.1 de 5 de 22.
Rated 5 de 5 de par Does a great job. I purchased this drill bit after having quite a bit of trouble drilling through a heavy steel assembly. Rather than waste money on a generic black oxide bit that probably would have done the job but no more I chose to bite the bullet and get the best bit I could get. I chose this cobalt steel bit in the hope that I would drill the hole and still have a useable bit. Well the bit work great cutting through the steel like butter with minimal pressure. The bit seems to be unaffected. The only down side is the cost of the bit but to tell the truth I will likely buy other bits as I need them even given the cost.
Date de publication: 2015-09-28
Rated 5 de 5 de par Great bit for hardened steel. Working on a steel project. My bits were just spinning on this steel. Borrowed friends larger drill and his steel bits but again no luck. Broke down and stopped spinning my wheels and drove to Lowes. Bought this bit and it went through the steel in seconds! I used a light oil to keep the bit tip oiled. This is a great bit. It also has a 3/8 chuck end so it fit in my Dewalt 8-Amp 3/8-in Keyless Corded Drill did a great job. If you are working with steel and need a 1/2" hole, this is the bit.
Date de publication: 2016-02-23
Rated 5 de 5 de par Great bit, but... These bits are awesome! I drilled through multiple pieces of cold rolled steel and the frame of my old pickup. The only problem I had, is that I broke 2 of them while drilling the frame. I want to emphasize that this is not a fault in the bit. This is misuse on my part, if you will. Will drilling the steel stock, I used a bench vice and kept the drill steady. Drilling the frame, however, made this difficult. Be careful of angles and catching with the bit. It wasn't the first, second or even third catch that broke the bit. I eventually lost count. I'm just glad the bit gave out before my wrist did. :) Overall, awesome product! I fully intend on purchasing another 1/2 inch, plus other sizes to be able to more easily do metal work. Again, the failure was not in the bit. It was in my usage.
Date de publication: 2017-07-09
Rated 5 de 5 de par Heavy duty drill bit Tried other drill bits to get holes drilled for a bracket in some 1/4 steel and my other bits only scratched the surface, got to hit and spin. Bought this and drilled all my holes in just a few minutes with no problem! I will be buying more as needed.
Date de publication: 2017-05-30
Rated 5 de 5 de par Like butter through strut channel galv steel Was in a bind after eating up the titanium hss bit I had trying to meet a looking deadline. Needing to get something that worked first time, without having to return to the store, I spent a little extra the cobalt bit. I was not let down - this bit did not slow down going through hole after hole in galvenized strut channel (superstrut). Must have made over 40 holes and it didn't show signs of wear. Buy the right tools for the job and it'll cost you less in time and trips to the store in the long run! [This review was collected as part of a promotion.]
Date de publication: 2019-04-14
Rated 5 de 5 de par Awesome drill bit Had to drill out lug studs to get wheels off of my car. This bit lasted long enough to drill out 2 1/2 lugs. I tried other brands that wouldn’t last long enough to drill even one lug although they were priced the same. I will purchase these bits again. [This review was collected as part of a promotion.]
Date de publication: 2019-07-28
Rated 5 de 5 de par Drill Bit That Works Excellent drill bit for exceptionally hard steel. Tried other type metal bits and they failed to penetrate galvanized steel tubing even with pilot hole. Titanium coated bits are a joke compared to cobalt. Spend a few quarters more for this drill bit. [This review was collected as part of a promotion.]
Date de publication: 2019-04-28
Rated 5 de 5 de par Did the job Was able to drill through hard steel. Ordinary bits could not. [This review was collected as part of a promotion.]
Date de publication: 2019-07-22
  • y_2020, m_4, d_7, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_fr_CA, sid_00276348, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT