Bassin pour pompe à puisard est évalué
Rated 5 de
I chose this for its size, its deep enough for a float switch. Its narrow design fit well in that digging out and cutting the floor was reduced considerably. Installation was fast. I set the base on the gravel about 1/4" below grade with about 2 inches clearance around all sides. I stood in the base as i backfilled the stone up to about 2" below grade. The mixing of the concrete fill was to a soft consistency to allow a bit of flow around the rim and concrete floor. Working in the concrete to flush around the edges of the basin and concrete gave a slightly sloped finish. Be sure to either insert the lid screws to block the concrete from filling in the holes or keep clean. Oh yeah one last thing, the lid is notched with the screw holes fixed. Be sure to rotate the basin so your slot is in the desired alignment before you back fill the gravel. As you can see i was slightly off alignment. A pro would tutt tutt that.
Date de publication: 2018-02-25