• icon-wishlist
  • icon-cart
Voir tous les produits CABOT

Fini pour le bois

Article #87005067 Modèle #CA19457-1 Format 946ML
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.

Fini pour le bois

icon-wishlist

Description

Utilisations recommandées pour terrasses extérieures en bois, parement, clôtures, garde-corps, marches, meubles extérieurs en bois, pour les substrats en bois seulement. Cabot australian timber oil est un mélange unique d'huiles formulées à l'origine pour protéger les bois denses d'Australie, tels que le tallowwood, le cambara et le merbau, contre des expositions extrêmes. Il s'agit d'un traitement à l'huile translucide éprouvé et spécialement formulé pour les terrasses et les meubles extérieurs. Pénètre profondément dans le bois pour accentuer la profondeur et la patine du bois naturel. Contenant un mélange précis d'huile de lin de qualité superbe pour une pénétration maximale, d'alkydes longs en huile pour la durabilité et d'huile de tung (huile de bois de chine) pure pour la profondeur de couleur et limperméabilité à l'eau, elle offre une protection à l'huile à triple action. accessoire ou indirect.

Caractéristiques

Couleur
Bois Ambre
Modèle
Australian timber oil
Composante
Base d'huile
Fini
Mat
COV
275 g/l.
Format
946 ml
Superficie
62 à 87 pi.ca.
Opacité
Translucide
Protection ultra-violets (O/N)
Oui
Hydrofuge (O/N)
Oui
Intérieur/Extérieur
Extérieur

Vous pourriez aussi aimer

Revêtement pour portes et fenêtres, chêne foncé, 946 ml icon-wishlist
SIKKENS
Revêtement pour portes et fenêtres, chêne foncé, 946 ml
Format 946ML
Détails
Article #52375654
Revêtement pour bois extérieur Cetol(MD) SRD, acajou icon-wishlist
SIKKENS
Revêtement pour bois extérieur Cetol(MD) SRD, acajou
Format 3.78L
Détails
Article #50316849
Fini pour le bois icon-wishlist
CABOT
Fini pour le bois
Format 3.78LT
Détails
Article #87005066
Revêtement pour portes et fenêtres, satin naturel, 946 ml icon-wishlist
SIKKENS
Revêtement pour portes et fenêtres, satin naturel, 946 ml
Format 946ML
Détails
Article #52375656
Revêtement pour bois extérieur Cetol(MD) SRD, noix cendrée icon-wishlist
SIKKENS
Revêtement pour bois extérieur Cetol(MD) SRD, noix cendrée
Format 18.9L
Détails
Article #50316850
Teinture extérieure translucide pour bois, brun icon-wishlist
SAMAN
Teinture extérieure translucide pour bois, brun
Format 3.78L
Détails
Article #72645210
Revêtement Cetol 1 pour parements, 18,9 l, naturel clair icon-wishlist
SIKKENS
Revêtement Cetol 1 pour parements, 18,9 l, naturel clair
Format 18.9LT
Détails
Article #50316727
Teinture pour parement et rondins Cetol(MD), 3,78 l, cèdre icon-wishlist
SIKKENS
Teinture pour parement et rondins Cetol(MD), 3,78 l, cèdre
Format 3.78L
Détails
Article #52375657
Revêtement pour bois extérieur Cetol(MD) SRD, noix cendrée icon-wishlist
SIKKENS
Revêtement pour bois extérieur Cetol(MD) SRD, noix cendrée
Format 3.78L
Détails
Article #50316851
Revêtement Cetol 1 pour parements et bois rond, 18,9 l, teck icon-wishlist
SIKKENS
Revêtement Cetol 1 pour parements et bois rond, 18,9 l, teck
Format 18.9LT
Détails
Article #50316728
Revêtement pour bois extérieur Cetol(MD) SRD, teck icon-wishlist
SIKKENS
Revêtement pour bois extérieur Cetol(MD) SRD, teck
Format 18.9L
Détails
Article #50316856
Fini pour le bois icon-wishlist
CABOT
Fini pour le bois
Format 3.78LT
Détails
Article #87005068
Teinture et scellant transparent, Restore 12x couche claire icon-wishlist
RESTORE
Teinture et scellant transparent, Restore 12x couche claire
Format 3.61L
Détails
Article #03305900
Couche de finition pour parements et bois rond, noix de beurre icon-wishlist
SIKKENS
Couche de finition pour parements et bois rond, noix de beurre
Format 3.78LT
Détails
Article #50316738
Revêtement parements et bois rond Cetol(MD), teck icon-wishlist
SIKKENS
Revêtement parements et bois rond Cetol(MD), teck
Format 3.78LT
Détails
Article #50316721
Fini pour le bois icon-wishlist
CABOT
Fini pour le bois
Format 946ML
Détails
Article #87005071

It says for hardwoods , will it work on ipe ?

Posée par: Mstraw
It should. Use clear one and I would try on small area to see whether it darkens or not. It should not on good quality wood.
Répondue par: Kelu
Date de publication: 2019-09-03

is this an oil base product

Posée par: tbone49
its pure linseed oil
Répondue par: notjackie27 ok
Date de publication: 2019-05-18

We have stained our deck with the timber oil. Can we put a varnish overtop to protect the stain so we aren’t staining every year

Posée par: Sheri49
 varnish is not going to bond because of oil. we put timber oil and even after winter looks very good (best product so far)
Répondue par: janet47
Date de publication: 2019-04-23

What is the average coverage for one gal.?

Posée par: bob41
250-350 sq ft
Répondue par: Rob45
Date de publication: 2019-04-01

is cabot australian timber oil safe to be used in garden raised beds?

Posée par: ottawa123
this i do not know , but product is the best we over use for deck etc .does not smell 
Répondue par: janet47
Date de publication: 2019-03-12

I have used mold deck remover and the underside of my deck is still moldy.  Is it ok to just use the Australian oil on top of it?  

Posée par: Xoxoxo

5 years ago i used Australian oil ,honey teak on my beck, this was an oil based product. now I need to stain again, but in Canada we do not get oil based products anymore. The question is can I use the water base modified on top of the old oil base?

Posée par: Dan 17

This product has oil in its name. Is it truly an oil that soaks in or is it a latex (soap and water clean up) that forms a skin. I am looking for a penetrating oil product that soaks in. Previous products used formed a skin which wore and pealed unevenly

Posée par: Comet
  • y_2019, m_11, d_12, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_fr_CA, sid_87005067, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Fini pour le bois est évalué 3.7 de 5 de 176.
Rated 5 de 5 de par Great Product I re-finished a deck that was dark grey and black from mold, dirt and neglect. I scrubbed it clean so it looked like wood again and applied Cabots Australian Timber Oil Jarrah Brown to the floor, seats and top plate on rail, I painted the rail slats to match house color. This was in 2011 yikes today I have started scrubbing the deck and will re- apply the same stain again, it probably should have been done a bit sooner but it has been 7 yrs. and this deck was not in great shape to begin with but I really think ATO saved my deck.. The photo is of it being washed and how it looked after over 7 yrs of Iowa weather. It will look new when I'm done again.
Date de publication: 2018-06-07
Rated 4 de 5 de par Stained the deck Did all the required prep and used a non-air commercial sprayer to apply. Went on smoothly and dried completely in 48 hours.Over sprayed many plants. Rinsed off what I could and only had a few leaves, no plants, that died. Sprayed steel anti-slip grid and dried in 12 hours. Sprayed the anodized aluminum rails to preserve the color and after 4 weeks they are still tacky. The wood has a slight orange tint, but the wood grain shows excellently. I asked for clear and was sold the #9400 Australian timber oil (natural). I'd purchase again and recommend to anyone, except for the anodized aluminum.
Date de publication: 2013-08-08
Rated 2 de 5 de par Disappointing I've used Cabot Australian Timber Oil #9458 stain on my deck starting in 2008. Super durability and very satisfied. After 8 years it needed staining again. I was forced to use the same product but different chemical make up. (#19548) In 2017 I had it redone again because I had replaced some boards. Enter 2019 and it needs to be stained again! I did the required steps in prepping it every time it has been done. Not very durable! And a very disappointing product. I will offer a word of advice to others, Spraying or rolling may be quick but brushing is the best way to apply it to a deck surface especially if you have gaps between your boards.
Date de publication: 2019-06-14
Rated 5 de 5 de par Easy to apply and looks great I used the Honey Teak color of this stain on a pergola I built behind my New Orleans home.  The lumber is simple pressure treated pine which I sanded with 120 grit sandpaper before I applied the stain.  This is the first time I ever used any kind of stain so I used a lambswool applicator for best results.  I was careful to wipe it repeatedly with the applicator to even the application out and take up any excess.  I found it took about three days before the stain was fully cured and no longer tacky.  I couldn't be happier with the results.  I can't imagine why anyone uses cedar or other premium price wood when this stain makes pine look so good !
Date de publication: 2013-09-17
Rated 5 de 5 de par Rich, Deep Color I am very happy I used the Australian Timber Oil, Honey Teak color, for my new deck. At first the color seemed darker than I expected, but now that it's done, I really like it. It has a rich, deep, burnished, and expensive look and also a nice sheen. My deck is 17x19 and 2nd floor, so I had railing, stairs, and underneath to do also, and I used exactly 5 gallons. I expected to use 2 gallons based on the stated 400-600 square foot coverage, so I guess my wood really soaked it up. I waited 5 months after building to apply it.
Date de publication: 2012-05-23
Rated 1 de 5 de par NEW FORMULA - AVOID AT ALL COSTS I've been purchasing Australian Timber Oil (Natural) for my IPE hardwood deck for a # of yrs. now. Loved IT!! I live in Canada where harsh winters can play havoc on a deck. When applied, the product would last very well for more than 2 years before requiring another coat. Now they've changed the formula of the product and it is completely ineffective. Would not recommend this to ANYONE with hardwood. Suggest Messmers - products are outstanding and formula remains unchanged. After putting Australian Timber Oil on a test patch this year, it lasted less than one week in the full sun before fading significantly.
Date de publication: 2015-06-05
Rated 1 de 5 de par Poor results I sanded my pressure treated deck down to remove all prior stain/water repellant product. Power washed it to remove the grit and dust. Let the wood dry for 3 days and then applied Jarrah Brown Australian Timber Oil as recommended. While wet it looked fine but after drying it was blotchy and after going through a winter it is dull. It does repel water nicely. I am extremely disappointed after going to all the time and trouble of sanding the deck to have it turn out like this. I would not recommend this product. Any suggestions on how to fix the blotchy appearance would be greatly appreciated.
Date de publication: 2016-05-22
Rated 2 de 5 de par Must Apply This Properly Or It Looks Terrible I applied this to a pine deck that had no previous protection and was installed 3 years ago.  After cleaning the deck with a wood cleaner (and letting it dry 3 days) I applied Cabot Australian Timber Oil with a roller.  The finish looks terrible with lap marks galore.  I wish the directions would warn against the use of a roller (as the Cabot help line did).  Now my only option is to let it wear off over time and endure the terrible look, or use a stripper.  Stripping takes a lot of effort (using the recommended Cabot product) but I don't know if I can bear to look at this every day.
Date de publication: 2013-09-05
  • y_2019, m_11, d_12, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_176
  • loc_fr_CA, sid_87005067, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT