• icon-wishlist
  • icon-cart
Voir tous les produits LINCOLN ELECTRIC

Fil fourré pour soudage Lincoln Electric, 0,030 po, 1 lb

N° d'article 330734741 N° de modèle ED031448
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Ce fil fourré NR211 de soudage de 0,030 po de Lincoln Electric est offert dans une de bobine 1 lb (0,5 kg).
  • Sans gaz DC-
  • Pénétration profonde.
  • Robustesse de soudure supérieure.

Caractéristiques

Diamètre du fil
0,030 po
Classification AWS
N/D
Type
Fil fourré
Position
Toutes les positions
Type d'emballage
Bobine
Poids de l'emballage de fil à souder
1 lb

Vous pourriez aussi aimer

Ensemble soudure argent icon-wishlist
OATEY
Ensemble soudure argent
Format 113GR
Détails
N° d'article 1120099
Soudure argenté icon-wishlist
OATEY
Soudure argenté
Format 113GR
Détails
N° d'article 1120073
Soudure argenté icon-wishlist
OATEY
Soudure argenté
Format 227GR
Détails
N° d'article 1120033
Fil pour soudure icon-wishlist
OATEY
Fil pour soudure
Format 227GRx50/50
Détails
N° d'article 1120119
Métal d'apport en fil 95/5 sans plomb icon-wishlist
OATEY
Métal d'apport en fil 95/5 sans plomb
Format 250GRx95/5
Détails
N° d'article 1120032
Soudure argenté icon-wishlist
OATEY
Soudure argenté
Format 1LB
Détails
N° d'article 1120120
Fil à souder pour plomberie Harris, 0,118", argent icon-wishlist
HARRIS
Fil à souder pour plomberie Harris, 0,118", argent
Format 3OZxDIA0.118"
Détails
N° d'article 33555004
Pâte à souder sans plomb n° 5, 1,7 oz icon-wishlist
OATEY
Pâte à souder sans plomb n° 5, 1,7 oz
Format #5x1.7OZ
Détails
N° d'article 11205261
Soudure icon-wishlist
OATEY
Soudure
Format 1LBx95/5
Détails
N° d'article 1120028
Soudure icon-wishlist
OATEY
Soudure
Format 227GRx60/40
Détails
N° d'article 1120075
Flux d'avivage sans plomb n° 95, 1,7 oz icon-wishlist
OATEY
Flux d'avivage sans plomb n° 95, 1,7 oz
Format #95x48GR
Détails
N° d'article 11205285
Soudure icon-wishlist
OATEY
Soudure
Format 113GRx40/60
Détails
N° d'article 1120070
Fil à souder électrique, sans plomb, argent, .062 po, 3 oz icon-wishlist
HARRIS
Fil à souder électrique, sans plomb, argent, .062 po, 3 oz
Format 3OZxDIA0.062"
Détails
N° d'article 33555003
Fil pour soudure icon-wishlist
OATEY
Fil pour soudure
Format 113GRx50/50
Détails
N° d'article 1120069
Fil à soudure 40/60 icon-wishlist
OATEY
Fil à soudure 40/60
Format 1LBx40/60
Détails
N° d'article 11205152
Fil pour soudure icon-wishlist
OATEY
Fil pour soudure
Format 1LBx50/50
Détails
N° d'article 1120031
Soudure icon-wishlist
OATEY
Soudure
Format 227GRx40/60
Détails
N° d'article 1120122
Décapant pour plomberie hydrosoluble Harris, 1 oz icon-wishlist
HARRIS
Décapant pour plomberie hydrosoluble Harris, 1 oz
Format 1OZ
Détails
N° d'article 33555005
Soudure icon-wishlist
OATEY
Soudure
Format 42GRx40/60
Détails
N° d'article 1120098
Décapant à plomberie sans plomb Harris, PF200, 2 oz icon-wishlist
HARRIS
Décapant à plomberie sans plomb Harris, PF200, 2 oz
Format 2OZ
Détails
N° d'article 33555006
Adhésif sans soudure icon-wishlist
JACO
Adhésif sans soudure
Format 10GR
Détails
N° d'article 0173455
Fil à souder, SAC300, 0,062", métal, argent icon-wishlist
HARRIS
Fil à souder, SAC300, 0,062", métal, argent
Format 3OZ-DIA0.062
Détails
N° d'article 33555002
Soudure icon-wishlist
OATEY
Soudure
Format 22GRx60/40
Détails
N° d'article 1120071
Soudure argenté en fil Safe-Flo(MD), sans plomb, 28 g icon-wishlist
OATEY
Soudure argenté en fil Safe-Flo(MD), sans plomb, 28 g
Format 28GR
Détails
N° d'article 1120072
Électrode E7014, Fleetweld 47 de Lincoln Electric, 1/8 po, 5 lb icon-wishlist
LINCOLN ELECTRIC
Électrode E7014, Fleetweld 47 de Lincoln Electric, 1/8 po, 5 lb
 
Détails
N° d'article 330734726
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Fil fourré pour soudage Lincoln Electric, 0,030 po, 1 lb est évalué 4.4 de 5 de 42.
Rated 5 de 5 de par One Pound OF Efficiency There's a reason these rolls come in one pound. If you don't do much welding on mild steel then the one pound .030 or .035 is for you. The composition of the flux on any flux core wire can deteriorate when stored or not being used for long periods. Lincoln doesn't recommend storing or keeping flux core or solid welding wire over six months. Hobart also doesn't recommend storing flux core or solid long either. I've learned over the years that it does go bad if it isn't used within a year.I have an older Century 125 GL which is the same I believe as Lincoln Weldpak 125 except the Century can be adapted to using gas and this is the best for someone like me who does occasional welding projects around the home.
Date de publication: 2017-06-19
Rated 5 de 5 de par Great flux core wire This wire virtually transformed my Harbor Freight 90 amp welder. The wire supplied by the manufacturer produces some of the worst looking welds ever. This wire holds an arc better and has far less spatter. I converted my AC welder to a DC negative torch which made it even better. This wire allows you to produce some excellent welds. It's all I use now.
Date de publication: 2017-09-14
Rated 4 de 5 de par Hmm... I had a Lowe's gift card and I needed some wire, so I picked three spools up. I was pleased that it was much cheaper than most other places, until I noticed that this is only a one pound spool. Everyone else sells two pound spools in this size at only a few more dollars. Actually, this wire is quite expensive. It welds as good as any other flux cored wire I have used. There is one thing I have noticed. When I install a fresh spool into my welder, the end of the new roll's wire is bent over and through a hole in the spool to keep it in place. It almost always breaks when I try to take it out of the hole. Usually, I'm not expecting this and it unravels some before I can catch it, which is quite annoying. This spool comes with a MSDS. Due to the price and small spool, I probably won't buy this product again.
Date de publication: 2012-01-14
Rated 4 de 5 de par Less splatter, but higher cost There is less splatter than some of the others, but I can buy 3 lbs. of other brands for the price of 2 lbs. of Lincoln . I wish that it came in a lower (cost per pound) 2 lb. spool.
Date de publication: 2013-11-03
Rated 5 de 5 de par [This review was collected as part of a promotion.] TRIED TWO OTHER BRANDS OF WIRE, ONE DISCOUNT, ONE BRAND NAME. NO GOOD. THEN BOUGHT YOUR WIRE. VERY GOOD STABILITY AND CONTROL. WILL PASS THIS INFO ON TO OTHERS. THANK YOU.
Date de publication: 2018-10-02
Rated 5 de 5 de par THIS WIRE MAKES A VAST DIFFERENCE [This review was collected as part of a promotion.] I had bought a fairly new, 2nd-hand lincoln 120 v.a.c. mig welder. I had never welded with a MIG welder and I was very disappointed in the welding performance. I had always welded with a Miller or Lincoln stick welder and I felt that it could me and that I just wasn't a MIG welder. The best thing that happened to me is that I ran out of wire while welding. As soon as I purchased this Lincoln brand wire, the results were simply amazing. The cheap brand that came with the welder was the problem all along. I was thrilled to find out that Lincoln wire truly makes a vast difference in welding with a MIG welder. I highly recommend Lincoln "All Positions Flux Wire - 0.030" to anyone owning a Lincoln MIG welder.
Date de publication: 2018-11-29
Rated 5 de 5 de par Fluxed core welding wire I have been using this wire for years and have gotten good results from it. The only thing i don't like about it is the roll is too small.
Date de publication: 2014-02-12
Rated 2 de 5 de par Awful excuse for flux cored wire I bought this to use with my Century FC90. I’ve heard good things about Lincoln wire and how good it ran in low end welders. I honestly can’t believe how unbelievably bad it is. It’s inconsistent, regardless of settings, makes absolutely garbage looking welds (even for flux core), penetrates like the hot melted core of Chernobyl, or pops and launches all the metal it displaces to the ISS in one big spatter explosion. I got Forney .030 wire, it runs great, and I don’t think I’ve gotten any better at welding in 3 minutes, so it’s definitely crappy Lincoln wire. Also it a huge rip off only giving you 1lb, pay $5 more, get some forney or some other good wire, and get twice as much for the Sam size spool.
Date de publication: 2020-12-26
  • y_2021, m_8, d_4, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_42
  • loc_fr_CA, sid_330734741, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT