• icon-wishlist
  • icon-cart
Voir tous les produits GENERAL

Fausse équerre coulissante numérique

Article #01215292 Modèle #828 Format 8"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.
icon-wishlist

Description

Mesure angle intérieur ou extérieur. Élimine les erreurs de transfert de données. Lame en acier inoxydable 8". Maintient et transfère les angles d'une pièce à l'autre. Affichage ACL complet et mise hors tension automatique. Précision 0,3°. Gamme 0° à 360° (résolution 0,05°). Pile au lithium 3 V (CR2032) comprise.

Vous pourriez aussi aimer

Aimant icon-wishlist
Aimant
Format 3/8"x3/4"xPK8
Détails
Article #6386045
Guide de coupe en aluminium « Acculine Tru-Line » de 98'' icon-wishlist
JOHNSON
Guide de coupe en aluminium « Acculine Tru-Line » de 98''
 
Détails
Article #0704070
Aimant icon-wishlist
Aimant
Format 3/16"x1/2"xPK10
Détails
Article #63865574
Aimant icon-wishlist
Aimant
Format 6"-24"
Détails
Article #63865579
Bande magnétique icon-wishlist
Bande magnétique
Format 1/2"x10'
Détails
Article #63865573
Détecteur d'humidité numérique, General, plastique icon-wishlist
GENERAL
Détecteur d'humidité numérique, General, plastique
 
Détails
Article #01215202
Rapporteur d'angle General, métal icon-wishlist
GENERAL
Rapporteur d'angle General, métal
 
Détails
Article #01215089
Vernier icon-wishlist
GENERAL
Vernier
 
Détails
Article #01215296
Guide de coupe de 50'' en aluminium icon-wishlist
ROK
Guide de coupe de 50'' en aluminium
Format 50"
Détails
Article #94945069
Alêne icon-wishlist
FULLER
Alêne
Format 5"
Détails
Article #1422096
Balai magnétique à manche ajustable, 24" icon-wishlist
ROK
Balai magnétique à manche ajustable, 24"
Format 24x30-44 1/2"
Détails
Article #94945078
Balai magnétique icon-wishlist
STINSON
Balai magnétique
Format 8"
Détails
Article #00336010
Outil de marquage icon-wishlist
GENERAL
Outil de marquage
 
Détails
Article #01215293
Vernier Numérique icon-wishlist
GENERAL
Vernier Numérique
 
Détails
Article #01215291
Localisateur d'angle numérique icon-wishlist
JOHNSON
Localisateur d'angle numérique
 
Détails
Article #07045064
Localisateur d'angles icon-wishlist
JOHNSON
Localisateur d'angles
 
Détails
Article #0704066
Aimant icon-wishlist
Aimant
Format 3/8x7/8x1 7/8"xPK2
Détails
Article #63865576
Ramasse-pièces mécanique avec lumière Del, 24" icon-wishlist
GENERAL
Ramasse-pièces mécanique avec lumière Del, 24"
Format 24"
Détails
Article #01215300
MIROIR D'INSPECTION 2-1/4 PO. icon-wishlist
GENERAL
MIROIR D'INSPECTION 2-1/4 PO.
 
Détails
Article #01215096
Aimant de levage icon-wishlist
Aimant de levage
 
Détails
Article #63865580
Aimant icon-wishlist
GENERAL
Aimant
 
Détails
Article #01215295
Magnétiseur / démagnétiseur icon-wishlist
Magnétiseur / démagnétiseur
 
Détails
Article #63865578
Rapporteur d'angle, acier inoxydable, 6" icon-wishlist
GENERAL
Rapporteur d'angle, acier inoxydable, 6"
Format 6"
Détails
Article #01215294
Miroir d'inspection à manche télescopique icon-wishlist
GENERAL
Miroir d'inspection à manche télescopique
Format 360DG 12 1/4-33"
Détails
Article #01215299
Pied à coulisse numériquede Toolway, 6 " icon-wishlist
MATRIX
Pied à coulisse numériquede Toolway, 6 "
 
Détails
Article #330677783
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Fausse équerre coulissante numérique est évalué 4.0 de 5 de 42.
Rated 1 de 5 de par I need to stop buy things that are made by General Was hoping to use this to measure angles for wood working but this things is kind of a joke. I'm not a tool snob and I usually don't mind Jerry rigging stuff in order to make it work but this is going back to Lowes ASAP. First off it isn't very well built. Second, if you have it on a flat surface and zero it, move it a few degrees and then move it back to zero, all while keeping it on the flat reference, it will read anywhere from 1 to 2 and sometimes 2.5 degrees off. Now, for building a house 1 or 2 degrees might not be an issue when putting in studs and such, but for making furniture, 1 degree can make or break a project. This thing is going back... If I can find the receipt...
Date de publication: 2016-12-11
Rated 4 de 5 de par A decent Product The digital readout is easy to use and the item is fairly accurate. I tested in on my drafting triangles and it was always within about half of a degree.
Date de publication: 2016-01-15
Rated 2 de 5 de par Has signifigant play between the moving parts Would have gone 3 stars except that lowes lists the accuracy as .05 degrees. On the package it states .3 degrees. In practice, it's over a degree non accurate due to the knife slipping inside the gauge. If you only move it in one direction, for example open it or close it, it's accuracy is darn good. If you wiggle it to find the angle, forget it. I also had the screw pop off while putting it away. I think I may take mine apart and glue the slide into a fixed position. Overall I think it will be usefull for stave drum building and tool set up. I like that I can read the gauge. My eyes aren't good enough to spot a good line up anymore. A bit disappointed, but I would recommend as long as you understand where the flaw is.
Date de publication: 2016-12-11
Rated 5 de 5 de par Great tool for your back pocket , easy to use find that unknown angle of the corner that should be 90 may not be , check it before you cut the expensive molding You can flip the angle to have the missing angle (or opposite ) side of the angle Of coarse to make sure get out you old true square put he unit on your square and "zero" the T bevel now you have a true square device to work with.
Date de publication: 2016-10-02
Rated 4 de 5 de par Good for Quick Jobs I purchased this Bevel Gage and it worked for the quick job I was completing. Calculate the angle, set the saw, cut the wood, perfect angle. However, the method to zero the gage seems straightforward but the rounded portion of the metal blade does not fit well within the handle. I had to double check that the blade was straight. Yes, I am a perfectionist. I rated this product as a 5 because the gage performed as expected and the result was exactly what I wanted. If there were an option for a 4.9 rating, I would have opted for that rating instead. [This review was collected as part of a promotion.]
Date de publication: 2018-08-04
Rated 1 de 5 de par Very poorly built Not very accurate, has play in it. First one I bought the interior screw came loose first day pining the slide from opening. Returned it and the next one had the screw holding the metal disk even though it was tight in my belt backed itself loose and fell out while I was putting it away somewhere in the yard. They need to have a weld or something at the end of the screw so it doesn't fall apart all of the time! Second time it's happened 30 bucks and two trips to the store across town wasted...
Date de publication: 2016-07-20
Rated 5 de 5 de par under $30 it is a no brain-er. I have older bevel gauges that one has to transfer the angle to a protractor. This is a good tool. I even use it for setting my metal lathe tool post angle. I also have one at school where I teach applied mathematics. Mathematics for the Machine Trades. One must understand your geometry- supplementary-complementary angles.
Date de publication: 2016-01-18
Rated 5 de 5 de par I have just used it today to find out the angel to set my saw worked perfect
Date de publication: 2016-07-07
  • y_2020, m_4, d_8, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_42
  • loc_fr_CA, sid_01215292, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT