• icon-wishlist
  • icon-cart
Voir tous les produits MITEK

Étrier à solive

Article #67495161 Modèle #JUS26-TZ Format 2x6-8"x18CAxBT100
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.

Étrier à solive

icon-wishlist

Description

Étrier à solive 2 po x 6 à 8 po. Boîte de 100. Calibre 18. Simple.

Vous pourriez aussi aimer

Étrier en acier galvanisé, 2 1/2" x 9 1/4", 50/pqt icon-wishlist
MITEK
Étrier en acier galvanisé, 2 1/2" x 9 1/4", 50/pqt
Format 21/2x21/2x91/4
Détails
Article #67495205
Étrier en acier galvanisé de 1 13/16" x 11 7/8" icon-wishlist
Étrier en acier galvanisé de 1 13/16" x 11 7/8"
Format 1 13/16x11 7/8"
Détails
Article #8589012
Étrier double en acier de 2" x 8" à 10", boîte de 50 icon-wishlist
MITEK
Étrier double en acier de 2" x 8" à 10", boîte de 50
Format 2x8-10"x18CAxBT50
Détails
Article #67495218
Étrier en acier galvanisé de 2 3/8" x 14" icon-wishlist
SIMPSON STRONG-TIE
Étrier en acier galvanisé de 2 3/8" x 14"
Format 2 3/8x14"
Détails
Article #8589016
Étrier en acier galvanisé de 2" x 10", boîte de 25 icon-wishlist
MITEK
Étrier en acier galvanisé de 2" x 10", boîte de 25
Format 2x10"xBT25
Détails
Article #67495220
Étrier double en acier de 5 1/4" x 11 icon-wishlist
SIMPSON STRONG-TIE
Étrier double en acier de 5 1/4" x 11
Format 5 1/4"x11"
Détails
Article #35945000
Étrier en acier galvanisé de 3 9/16" x 9 1/2" icon-wishlist
SIMPSON STRONG-TIE
Étrier en acier galvanisé de 3 9/16" x 9 1/2"
Format 3 9/16x9 1/2"
Détails
Article #8589017
Étrier simple en acier galvanisé de 2" x 8", boîte de 25 icon-wishlist
MITEK
Étrier simple en acier galvanisé de 2" x 8", boîte de 25
Format 2x8"xBT25
Détails
Article #67495221
Étrier triple en acier galvanisé, 2" X 10" icon-wishlist
SIMPSON STRONG-TIE
Étrier triple en acier galvanisé, 2" X 10"
Format 2"x10"
Détails
Article #35945001
Étrier en acier galvanisé de 3 1/8" x 11 7/8" icon-wishlist
SIMPSON STRONG-TIE
Étrier en acier galvanisé de 3 1/8" x 11 7/8"
Format 3 1/8x11 7/8"
Détails
Article #8589018
Étrier en acier galvanisé de 1 3/4" x 14" icon-wishlist
SIMPSON STRONG-TIE
Étrier en acier galvanisé de 1 3/4" x 14"
Format 1 3/4x14"
Détails
Article #8589077
Étrier à montage de face en acier galvanisé de 2" x 10" icon-wishlist
MITEK
Étrier à montage de face en acier galvanisé de 2" x 10"
Format 2"x10"
Détails
Article #67495227
Étrier en angle en acier de 2" x 8" à 12", boîte de 25 icon-wishlist
MITEK
Étrier en angle en acier de 2" x 8" à 12", boîte de 25
Format 2"x8-12"xBT25
Détails
Article #67495144
Étrier à solive Simpson Strong-Tie, double, 3 5/8" x 8 1/2" icon-wishlist
SIMPSON STRONG-TIE
Étrier à solive Simpson Strong-Tie, double, 3 5/8" x 8 1/2"
Format 3 5/8x8 1/2"
Détails
Article #8589042
Étrier simple en acier galvanisé de 7 1/4" x 14" icon-wishlist
SIMPSON STRONG-TIE
Étrier simple en acier galvanisé de 7 1/4" x 14"
Format 7 1/4"x14"
Détails
Article #8589117
Étrier en acier galvanisé de 2" x 10", boîte de 25 icon-wishlist
MITEK
Étrier en acier galvanisé de 2" x 10", boîte de 25
Format 2x10"xBT25
Détails
Article #67495222
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Étrier à solive est évalué 4.3 de 5 de 15.
Rated 5 de 5 de par Please stop giving bad advice... These hangers are not intended to be screwed in or shot with a pneumatic nail gun. They are engineered to specific codes to hold weight, only if installed correctly with the correct fasteners. Screws and galvanized nails do not have the same sheering force, so they can't carry the same load. If you do install these, use the proper nails recommended by the manufacturer, and put a nail in every hole, that is what they are intended for.
Date de publication: 2016-12-14
Rated 5 de 5 de par Simpson strong tie I'd like to meet the CEO of simpson strong tie so I could kiss him! Their products are fantastic and worth every penny. I wouldn't build a deck without using this product. So much better then toe nailing/toe screwing. Increases the strength of the deck significantly. I'll be putting a hot tub on the deck and I have no concerns since I'm using this product. Very easy to use. If I was the maker, I'd consider slight modifications, but just minor. I've used these with each deck I've built and will do so in the future.
Date de publication: 2013-07-29
Rated 5 de 5 de par excellent product Very good joist hanger.I have used these before and they worked great.I needed some more for floor joists and they worked very good.Very pleased with results.
Date de publication: 2013-05-31
Rated 5 de 5 de par Please stop giving bad advice giving bad advice Screws are a no-no. Pneumatic tools are okay, per manufacturer's instructions: " Pneumatic nail tools may be used to install connectors, provided the correct quantity and type of nails (length and diameter) are properly installed in the nail holes. Tools with nail hole-locating mechanisms should be used. Follow the manufacturer’s instructions and use the appropriate safety equipment. Overdriving nails may reduce allowable loads."
Date de publication: 2017-08-18
Rated 5 de 5 de par Easy to use For a product that is very inexpensive, it sure makes framing a platform or deck a lot easier.
Date de publication: 2013-07-05
Rated 5 de 5 de par Necessary for all unsupported floor joists. Suggest using 1" square drive exterior screws for attaching the hanger to vertical support(s) before driving toe-nail screws or nails. I use exterior or galvanized fasteners to eliminate potential rust stains in future years.
Date de publication: 2014-01-28
Rated 4 de 5 de par Nice hanger I'm not sure what to write about this hanger. It's a joist hanger that had holes for the nails in the right spots and is galvanized so it will stand up to the outdoor environment. I expanded my porch and used them to hold the joists.
Date de publication: 2013-06-25
Rated 3 de 5 de par USE NAILS! We used this product to build our deck. We used screws to install them. The building inspector came today and told us WE MUST USE NAILS PER THE MANUFACTURERS SPECIFICATIONS! There ARE NO MANUFACTURERS SPECIFICATIONS ANYWHERE!! We now have to remove all the screws and put in nails. This should be specified somewhere!! Even the reviews suggest using screws. VERY FRUSTRATED CUSTOMER!!!
Date de publication: 2015-08-17
  • y_2019, m_11, d_12, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_fr_CA, sid_67495161, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT