• icon-wishlist
  • icon-cart
Voir tous les produits DREMEL

TIGE DE GOUJON FILETÉ

N° d'article 1916025 N° de modèle 402 Format 1/8"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Pour disques à tronçonner, à sabler et à polir.

Vous pourriez aussi aimer

eco
Lame pour outil multifonction, coupe à ras, 1 1/4 po, pqt 5, industrielle, échangeable icon-wishlist
EXCHANGE-A-BLADE
Lame pour outil multifonction, coupe à ras, 1 1/4 po, pqt 5, industrielle, échangeable
Format 1 1/4"xPK5
Détails
N° d'article 34595725
eco
Lame HCS EAB Tool coupe à ras pour bois, accessoire oscillant professionnel, 1 1/4", échangeable icon-wishlist
EXCHANGE-A-BLADE
Lame HCS EAB Tool coupe à ras pour bois, accessoire oscillant professionnel, 1 1/4", échangeable
Format 1 1/4x3.5"
Détails
N° d'article 34595673
Lame de coupe à ras en carbure 1 1/4" icon-wishlist
DREMEL
Lame de coupe à ras en carbure 1 1/4"
Format 1 1/4"
Détails
N° d'article 19165117
Lame de coupe à ras 1 1/4" x 1/16" icon-wishlist
DREMEL MULTI-MAX
Lame de coupe à ras 1 1/4" x 1/16"
Format 3/4x1/16"
Détails
N° d'article 19165100
eco
Ensemble de départ EAB Tool à 4 lames, outils oscillants professionnels, échangeable icon-wishlist
EXCHANGE-A-BLADE
Ensemble de départ EAB Tool à 4 lames, outils oscillants professionnels, échangeable
Format 1 1/4"x2 3/4"xPK4
Détails
N° d'article 09065021
eco
Lame outil multifonction, coupe à ras, 1,375'', paquet de 5, recyclable icon-wishlist
EXCHANGE-A-BLADE
Lame outil multifonction, coupe à ras, 1,375'', paquet de 5, recyclable
Format 1 3/8"x5MX
Détails
N° d'article 34595996
Foret à gypse « Zipbits » icon-wishlist
ROTOZIP
Foret à gypse « Zipbits »
Format ST8
Détails
N° d'article 19165060
eco
Lames pour coupe à ras bois/métal, 1 1/4 po, paquet de 5, industrielle, échangeable icon-wishlist
EXCHANGE-A-BLADE
Lames pour coupe à ras bois/métal, 1 1/4 po, paquet de 5, industrielle, échangeable
Format 1 1/4"xPK5
Détails
N° d'article 34595736
eco
Lame HCS EAB Tool coupe à ras rapide pour bois, accessoire oscillant professionnel, 2 3/4", échangeable icon-wishlist
EXCHANGE-A-BLADE
Lame HCS EAB Tool coupe à ras rapide pour bois, accessoire oscillant professionnel, 2 3/4", échangeable
Format 2 3/4x3 1/2"
Détails
N° d'article 34595676
eco
Lame outil multifonction, coupe ras/précisions, 1,375'', paquet de 5, recyclable icon-wishlist
EXCHANGE-A-BLADE
Lame outil multifonction, coupe ras/précisions, 1,375'', paquet de 5, recyclable
Format 1 3/8"x5MX
Détails
N° d'article 34595997
eco
Lame bimétal EAB Tool coupe à ras pour bois et métal, accessoire oscillant professionnel, 1 1/4", échangeable icon-wishlist
EXCHANGE-A-BLADE
Lame bimétal EAB Tool coupe à ras pour bois et métal, accessoire oscillant professionnel, 1 1/4", échangeable
Format 1 1/4x3 1/2"
Détails
N° d'article 34595674
eco
Lame bimétal coupe à ras, bois et métal, 1,375'', paquet de 5, recyclable icon-wishlist
EXCHANGE-A-BLADE
Lame bimétal coupe à ras, bois et métal, 1,375'', paquet de 5, recyclable
Format 1 3/8"x5MX
Détails
N° d'article 34595998
LAME icon-wishlist
DREMEL
LAME
 
Détails
N° d'article 1916316
GABARIT POUR GOUJONS icon-wishlist
WOLFCRAFT
GABARIT POUR GOUJONS
 
Détails
N° d'article 1137056
eco
Lame EAB Tool professionnelle HCS angulaire pour bois et cloison sèche, 3 3/8", échangeable icon-wishlist
EXCHANGE-A-BLADE
Lame EAB Tool professionnelle HCS angulaire pour bois et cloison sèche, 3 3/8", échangeable
Format 3 3/8x3 1/2"
Détails
N° d'article 34595677
Courroie de tambour icon-wishlist
DREMEL
Courroie de tambour
Format 1/2"xGR60xPK6
Détails
N° d'article 1916027
Forets à gypse, 1/8", paquet de 8, acier icon-wishlist
ROTOZIP
Forets à gypse, 1/8", paquet de 8, acier
Format 1/8"xPK8
Détails
N° d'article 19165077
eco
Lame HCS EAB Tool coupe à ras pour bois 2 3/4", accessoire oscillant professionnel, échangeable icon-wishlist
EXCHANGE-A-BLADE
Lame HCS EAB Tool coupe à ras pour bois 2 3/4", accessoire oscillant professionnel, échangeable
Format 2 3/4x3.5"
Détails
N° d'article 09065012
Trousse d'accessoires pour sculpture/gravure, 11 pièces, icon-wishlist
DREMEL
Trousse d'accessoires pour sculpture/gravure, 11 pièces,
Format 11MX
Détails
N° d'article 19835917
MANDRIN icon-wishlist
DREMEL EZ LOCK
MANDRIN
 
Détails
N° d'article 1916269
LAME icon-wishlist
DREMEL
LAME
Format 1/16"
Détails
N° d'article 1916311
eco
Lame de coupe à ras pour outil oscillant professionnel, pointes en carbure, 1 1/4 po, échangeable icon-wishlist
EXCHANGE-A-BLADE
Lame de coupe à ras pour outil oscillant professionnel, pointes en carbure, 1 1/4 po, échangeable
Format 1 1/4"
Détails
N° d'article 34595898
Lame pour bois franc icon-wishlist
DREMEL
Lame pour bois franc
Format 1 1/8"
Détails
N° d'article 19165088
Lames pour cloisons sèches icon-wishlist
DREMEL
Lames pour cloisons sèches
Format 3"x3MX
Détails
N° d'article 19165063
FORET À CLOISON SÈCHE icon-wishlist
ROTOZIP
FORET À CLOISON SÈCHE
Format 5/32"
Détails
N° d'article 1916285
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
TIGE DE GOUJON FILETÉ est évalué 1.9 de 5 de 53.
Rated 4 de 5 de par It's not as hard as you think! I'm not an avid tool user, but I do use my dremel for small projects (like adding a bevel to my drawing board to prevent artwork from slipping off). I actually had no issue with the mandrill. I found it works best if you screw it into the dremel, then hold the ferrule for grip/support, and use a short screwdriver to remove the screw. I do agree with another reviewer though, in that there should be mandrill screws sold separately, since the mandrill is way stronger than the screw itself, so having to replace the entire piece is kind of a waste.
Date de publication: 2016-05-20
Rated 1 de 5 de par Same issue This is absurd to me. Not only did the original mandrel included in my Dremel kit fail to detach from the screw, but the brand NEW one that I purchased separately will not budge either. To make matters worse, inserting the mandrel in the lock position of the Dremel to aid in screw detachment (as recommended) has now caused so much friction that it had damaged the tools ability to stay in position at all. The entire collet nut just rotates with every turn of the screw driver. This is clearly a recurring issue for people. Why not just sell the device with the screw detached in the first place? The tool is now worthless to me.
Date de publication: 2018-11-02
Rated 1 de 5 de par What are u going to do about the screw, Dremel? Dremel, you need to give some re-assurance that you are going to change something (like the metal compound or the threading or something else) in the 402 to avoid such problems. It's breaking on first use! We are not talking about a "worn" problem here. You are regarded as a high-quality brand so this situation is plain unacceptable. Tell everybody (not just me privately) what you are going to do about it (and hopefully when). Also how can we know what we buy is a "good" one? Like a number or color on the packaging for instance. And PLEASE do not divert the subject by pushing the "EZ LOCK" system. This is NOT an acceptable answer as it is NOT a 1:1 replacement since none of the plain discs will fit the EZ lock.
Date de publication: 2019-11-02
Rated 5 de 5 de par IT WORKS WITH ALITTLE TRICK [This review was collected as part of a promotion.] I've read alot of reviews concerning this product...most of them say that the screw has been put in way to tight, and all of you are correct.....however, with this trick, I got mine to loosen up and work....first put some WD-40 on the screw head and wait for awhile, then, with a small hammer or ball pein, tap LIGHTLY on the thick part rolling it as you do so....mine loosened right up.....no problem
Date de publication: 2019-04-19
Rated 1 de 5 de par Screw broke off inside mandrel on first use I purchased the Dremel 7700 which came with a kit, I needed to use a cutting wheel for a project, I removed the screw to attach the wheel and as I was screwing it back in it wouldn't go any further than half way in. When I removed the screw to see what was the problem I noticed that the tip was broke off inside the Mandrel! This was upon first use, right after removing the Dremel and accesories out of the box.
Date de publication: 2019-03-24
Rated 2 de 5 de par The screw is stuck Like the others, I am no longer able to use the mandrel as I can't undo the screw to remove the cutting wheel that's on there.
Date de publication: 2015-11-20
Rated 1 de 5 de par Poor quality I have not been able to use it because the tiny little screw is in there so tight that I can not get it loose. It will not budge! I was looking forward to using it today. After having trouble with it, I went on line thinking maybe the screw is not suppose to come out and I was doing something wrong. After reading the other reviews, I believe my continued efforts to try to remove it will prove to be a waste of my time. I do like everything else about the Dremel tool, but this accessory is a big disappointment.
Date de publication: 2015-07-02
Rated 4 de 5 de par Dremel 402 Mandrel This product makes your Dremel tool super easy to change implements. I used it for the 420 Cutting wheel and when I decided that I needs to switch to a standard 3/8 chuck drill, it was no problem. The only problem I had with the mandrel was the screw that holds the implement to the shaft. It takes a fairly small flat screwdriver to manipulate the screw, which I do not keep standard on my work bench. But its made of fairly sturdy material and I was able to use pliers to break it loose when I needed to changed cutting wheels. Overall it does the job and that's what I needed it to do.
Date de publication: 2013-04-16
  • y_2021, m_1, d_24, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_53
  • loc_fr_CA, sid_1916025, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT