• icon-wishlist
  • icon-cart
Voir tous les produits INSINKERATOR

Distributeur d'eau chaude instantanée

N° d'article 14295028 N° de modèle 44718 Format 750W-115V
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.


Le distributeur d'eau chaude instantanée « InSinkErator » constitue un ajout utile à votre cuisine. Il fournit jusqu'à 60 tasses d'eau presque bouillante (93 °C/200 °F) à l'heure, rapidement et facilement. Ce distributeur en acier inoxydable est doté d'un fini chrome qui s'agence à tout type de décor. Il est livré avec un robinet distributeur et un réservoir à eau chaude. Garantie de 3 ans sur pièces et main d'oeuvre.


Acier inoxydable
Distributeur d'eau chaude
Garantie de 3 ans sur pièces et main d'oeuvre
Réservoir 2/3 gallon (2,5 l), 60 tasses/h (14,19 litres/h)

Vous pourriez aussi aimer

Robinet pour eau potable, 1 levier, fini nickel brossé icon-wishlist
Robinet pour eau potable, 1 levier, fini nickel brossé
N° d'article 11965038
Robinet pour eau potable, 1 levier, fini chrome icon-wishlist
Robinet pour eau potable, 1 levier, fini chrome
N° d'article 11965039
Distributrice d'eau chaude, 2/3 gallon, chrome icon-wishlist
Distributrice d'eau chaude, 2/3 gallon, chrome
N° d'article 14295029
Distributrice d'eau chaude, 2/3 gallon, nickel satiné icon-wishlist
Distributrice d'eau chaude, 2/3 gallon, nickel satiné
N° d'article 14295030
Distributeur d'eau, température multiples, noir/platine icon-wishlist
Distributeur d'eau, température multiples, noir/platine
N° d'article 330680878
Distributeur d'eau chaude (40 tasses) icon-wishlist
Distributeur d'eau chaude (40 tasses)
Format 500WX4.3AX115V
N° d'article 1429021
Distributeur d'eau icon-wishlist
Distributeur d'eau
N° d'article 330680879
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Distributeur d'eau chaude instantanée est évalué 4.5 de 5 de 410.
Rated 4 de 5 de par Must have appliance This is our third insinkerator hot water dispenser. The first one had a copper tank that eventually sprung a leak. The second was an improved stainless steel tank but had a plastic drain plug in the bottom that eventually gave out. This one appears to be an improvement over both the prior models as the tank is stainless and does not have a drain plug that would create a potential leak point. The first lasted 4-5 yrs, the second about 8. I think this one will last longer. Since there isn't a drain plug, I did install a filter to reduce any sediment buildup. Replacement was easy and we use the dispenser daily. I strongly recommend this product.
Date de publication: 2015-01-05
Rated 2 de 5 de par Good for as long as it works I replaced an old hot water dispenser with this one because it was most similar to the old one. It worked great initially. After a few months, it took excessively long before water would dispense and now, after more than a year, the unit leaks from the bottom (not at the connections). I've installed several Insinkerator disposals and have thought they were all great, so I trusted the company to make a quality product, but this one just doesn't seem to stack up.
Date de publication: 2013-09-09
Rated 4 de 5 de par Excellent customer service I was offered and certainly took advantage of a generous offer for a replacement. Changes in design of tank connections require replacement of perfectly functioning faucet. There is no longer a drain outlet at bottom of tank formerly used to remove sediment. Instructions now say to remove tank and drain by inverting tank. IE no way to flush tank. This is tantamount to a reinstallation, not for the faint of heart as garbage disposal in some instances will also have to be removed. What was a 15 min cleaning is now, by my plumbers estimate, over $100. Might as well wait until it fails again and then replace. "New and Improved?"
Date de publication: 2014-07-16
Rated 4 de 5 de par This is a replacement for a leaking 9 year old model H770-SS, which gave us 200° water when knob was turned clockwise, and 130°water when turned counter-clockwise. The new one puts out only 185° water at the highest setting when turned in either direction, but it does have a better gripping knob. I took the old one apart to see were it was leaking and found the take was very well insulated except where an internal rubber hose was tight against the stainless steel tank and the heat finally made it split. This was very poor design. As soon as the warranty runs out on the new one, I will open the case to see if they have changed this and if they hadn't, I will add some foam behind this tube. The new one cost about $100 more than the old one,so I hope some of that money is for insulation for that tube. Over all, 9 years is very good as much as we used it. Our $1000 washing machine only last one year longer than that!
Date de publication: 2014-10-09
Rated 4 de 5 de par A Good Product The product is the second generation for my sink. It functions very well. Two considerations: i. If you have trouble gripping with your hands then consider a model with a lever type handle, ii.. If you plug the power into a timer the life of the unit will be extended. Over years use minerals in the water condense on the heating element causing it to overheat. A timer set to turn power to the heater off when not in use (e.g. overnight, and while at work) will slow the process resuting in a longer life. Be sure the timer is rated for the amperage of the heater. A good product.
Date de publication: 2020-03-13
Rated 5 de 5 de par Replacement Unit I purchased this hot water dispenser to replace one that we have had for 8 years. The new unit is a bit more stylish, but the basic function is the same. It supplies instant hot water when you need it. It was easy to install and required only basic tools. This is a good product for the money.
Date de publication: 2014-10-25
Rated 3 de 5 de par Cheap plastic trim ring shattered during installation There is a trim ring that sits between the faucet and the countertop that is made of cheap plastic rather than brass and it shattered as the plumber turned the wing nut that tightens down the faucet. The instructions do say "do not overtighten," but if the part were made of metal, this warning would not be necessary and a tight seal to the countertop could be achieved. I called Isinkerator, got through easily, and the rep sent me a replacement trim ring right away, but now the plumber has to come back to install it. As it stands, you cant tighten the wingnut enough to keep the faucet from swiveling without breaking the trim ring.
Date de publication: 2019-04-14
Rated 4 de 5 de par Works great once installed We had the same incredibly frustrating experience of the 1/4" compression nut & olive weren't included in the kit. We replace our 7 year old Contour model with this Classic because we could't find the Contour at Lowes or Home Depot except by special order. Despite being a new design the tank fit nicely on the old bracket. It's the inexpensive, but essential compression fitting that wasn't included that forced us to return to the hardware store to get one. Beware: Lowes didn't carry the small symmetrical olive & the nut provided didn't have enough threads to compress their asymmetric one. Once plumbed, the hot water tank worked well, with great flow & a larger reservoir than the past model.
Date de publication: 2014-02-10
  • y_2021, m_1, d_17, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_410
  • loc_fr_CA, sid_14295028, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms