• icon-wishlist
  • icon-cart
Voir tous les produits DEWALT

Scie à onglet combinée coulissante, 12", 15 A

Article #00275512 Modèle #DWS780 Format 12"x15AM
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

La scie à onglets combinée coulissante à double biseau Dewalt DWS780 se caractérise par son système de positionnement de coupe transversale XPS qui indique la ligne de coupe sans ajustement de façon précise et visible. Cette scie est équipée d'un moteur puissant pour une efficacité prolongée et plus de durabilité. Un système de collecte de la poussière capture plus de 75 % de la poussière générée lors de la coupe. Les grands guides coulissants de cette scie permettent de soutenir les moulures à la verticale et peuvent être retirés pour les coupes en biseau. De plus, un guide arrière permet de couper le bois de construction jusqu'à 16" de large. La plaque d'arrêt réglable en acier inoxydable avec 10 butées positives assure efficacité et précision. Garantie limitée de 3 ans.

Caractéristiques

Capacité de coupe
6 3/4" (plinthe à la verticale); 7 1/2" (ogee à la verticale); 16" (plinthe à l'horizontal); 13 3/4" (ogee à l'horizontal)
Type
Combiné / Coulissant
Composante
Métal/plastique
Angle de coupe
45° et 90°
Ampérage
15 A
Tours par minute
3800
Butée
10
Diamètre de l'arbre
5/8" ou 1"
Dimensions de la lame
12"
Inclus
Lame au carbure, clé de lame, sac pour poussière, pinces pour travail à la verticale
Garantie
30 jours pour remboursement, 1 an sur contrat de service et 3 ans limités

Produits fréquemment achetés ensemble

Lisière à 6 prises, protection contre surtensions, 6', jaune icon-wishlist
YELLOW JACKET
Lisière à 6 prises, protection contre surtensions, 6', jaune
Format 1.8M
Détails
Article #32045053
Adaptateur pour protection DDFT portative, 1800 W, 15 A icon-wishlist
YELLOW JACKET
Adaptateur pour protection DDFT portative, 1800 W, 15 A
 
Détails
Article #32045050
Cordon de rallonge électrique, 12/3, 25', rouge icon-wishlist
WOODS
Cordon de rallonge électrique, 12/3, 25', rouge
Format 12/3 25'
Détails
Article #74045239

Vous pourriez aussi aimer

Scie à onglet coulissante à deux biseaux, 12'' icon-wishlist
BOSCH
Scie à onglet coulissante à deux biseaux, 12''
Format 12"x15AM
Détails
Article #19835411
Scie à onglets au laser 10 po icon-wishlist
MAKITA
Scie à onglets au laser 10 po
Format 10"x13AM
Détails
Article #11975214
Scie à onglets combinée, 15 amp., 10" icon-wishlist
DEWALT
Scie à onglets combinée, 15 amp., 10"
Format 10" 15AM
Détails
Article #00277180
Scie à onglets avec support, 10", 15 A icon-wishlist
MAKITA
Scie à onglets avec support, 10", 15 A
Format 10"x15AM
Détails
Article #11975392
Scie à onglet combiné coulissante, DeWalt 12", 15 A icon-wishlist
DEWALT
Scie à onglet combiné coulissante, DeWalt 12", 15 A
Format 12"x15AM
Détails
Article #00276378
Scie à onglets pliante de 10", 15 A icon-wishlist
CRAFTSMAN
Scie à onglets pliante de 10", 15 A
Format 10"x15AM
Détails
Article #41537043
Scie à onglets combinée coulissante à batterie, 20V MAX icon-wishlist
DEWALT
Scie à onglets combinée coulissante à batterie, 20V MAX
Format 7 1/4"x20V
Détails
Article #00275878
Scie à onglet coulissante avec support,12", composite, 15 A icon-wishlist
BOSCH
Scie à onglet coulissante avec support,12", composite, 15 A
Format 12"x15AM
Détails
Article #19836216
Scie à onglets combinés à coulisse - 8 1/2 po icon-wishlist
MAKITA
Scie à onglets combinés à coulisse - 8 1/2 po
Format 8 1/2"x10.5AM
Détails
Article #11975335
Scie à onglets coulissante 10 po icon-wishlist
MAKITA
Scie à onglets coulissante 10 po
Format 10"x13AM
Détails
Article #11975297
Scie à onglet coulissante sans-fil Craftsman, 20V MAX, 7 1/4'' icon-wishlist
CRAFTSMAN
Scie à onglet coulissante sans-fil Craftsman, 20V MAX, 7 1/4''
Format 7 1/4"x20V
Détails
Article #00277177
Scie à onglets combinée coulissante, 10", 15 A icon-wishlist
MAKITA
Scie à onglets combinée coulissante, 10", 15 A
Format 10"x15AM
Détails
Article #11975391
Scie à onglets combinés à coulisse sans-fil, 18 V,  10'' icon-wishlist
MAKITA
Scie à onglets combinés à coulisse sans-fil, 18 V, 10''
Format 10"x18V
Détails
Article #11975464
Scie à onglets, 10", 13 A icon-wishlist
Scie à onglets, 10", 13 A
Format 10"x13AM
Détails
Article #59695044
Scie à onglets coulissante à simple inclinaison, Bosch, 18 V, lame de 8 1/2" icon-wishlist
BOSCH
Scie à onglets coulissante à simple inclinaison, Bosch, 18 V, lame de 8 1/2"
Format 8 1/2"x18V
Détails
Article #19836362
Scie à onglets, 7 1/4", 10 A icon-wishlist
KOBALT
Scie à onglets, 7 1/4", 10 A
Format 7 1/4"x10AM
Détails
Article #89335003
Scie à onglet combinée, biseau simple, Metabo HPT, 10''/15 A icon-wishlist
METABO HPT
Scie à onglet combinée, biseau simple, Metabo HPT, 10''/15 A
Format 10"x15A
Détails
Article #37815225
Scie à onglets multivolt Metabo HPT, 36 V, 10'' icon-wishlist
METABO HPT
Scie à onglets multivolt Metabo HPT, 36 V, 10''
Format 10"x36V
Détails
Article #37815201
Scie à onglet coulissante à double biseau avec laser, 12" icon-wishlist
METABO HPT
Scie à onglet coulissante à double biseau avec laser, 12"
Format 12"x15AM
Détails
Article #37815204
Scie à onglets double combinée avec laser, 10", 3800 tr/min icon-wishlist
METABO HPT
Scie à onglets double combinée avec laser, 10", 3800 tr/min
Format 10"x15AM
Détails
Article #37815175

what does the 3 year warranty include

Posée par: Buda
Covers all parts and labour except blade or damage caused from misuse. Doesn't cover shipping, however there should be an authorized dealer near you where you can drop it off and pick it up.
Répondue par: Mark1958
Date de publication: 2019-03-19

What blade comes with the DWS780, is it a 12" 32T or a 12" 80T

Posée par: steve_1021
It came with 12" 60T blade. I'll be glad to get 80T as upgrade/bonus!!!
Répondue par: Nosrat
Date de publication: 2018-11-24

Does it come with the stand?

Posée par: JakeT
Usually no.  But if you wait for the right sale it can, I got my stand for free with it but it was a special sale.  
Répondue par: Jonrusso81
Date de publication: 2018-09-12

Can this saw, in one cut, a 6"x6" or a 8"x8" post?

Posée par: mcpat2
No unfortunately the most you'll be able to cut with a 12 in mitre saw is going to be bout 5.5 inches due to the washer getting rid of a lot of cutting space. A 6x6 is truly 5.75inx5.75in so it will not cut it in one pass but it will cut 95% of it then you can either flip it or cut the last little bit with a hand saw.
Répondue par: Cody leb
Date de publication: 2018-07-10

Est-ce qu'il y a un support qui vient avec la scie?

Posée par: Dave

how does this compare to Dewalt model DWS709

Posée par: cliff42
  • y_2020, m_8, d_8, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_fr_CA, sid_00275512, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Scie à onglet combinée coulissante, 12", 15 A est évalué 4.8 de 5 de 240.
Rated 4 de 5 de par Good saw for do it yourself and pros I use this saw everyday and love the auto tilt bevel locks and cuts perfect. I do wish the saw dust system wasn't a mile long tube to the bag. Clogs up right away. The fence slides are hard to slide out and have to get hit with my hammer to extend them. I would like to see dewalt set up a different slide system, with the bag on the back I hack to have over 3to4 feet from a wall so my saw has clearance makes cutting in hallways on big jobs impossible. I would also like the saw to have a little more rpm saw bogs down on cuts and causes the blade to warp in my cuts also. I also would like a laser and tape measure marks on the saw fence or even on the platform for fast cuts. Great saw but could be better.
Date de publication: 2018-05-12
Rated 5 de 5 de par 100% the best buy for the money Purchased saw when Lowes ran a special that included the base stand, a $200 dollar option, for FREE. I am so happy I did so. Such an awesome addition to my shop. At first I was torn between the Bosch and this, the free stand sold me and I don't regret it for one second. Angle cuts are spot on, the light is spot on, almost everything about this is perfect. The only thing I'd improve on for this saw are the clamps and the blade depth stop. Those two aspects are the only thing I see that my buddies K-Pex does better, but at $1200s for a K-Pex no thanks. When cutting tenons use a spacer against the back stop and it'll work just fine.
Date de publication: 2013-10-23
Rated 5 de 5 de par Best tool I own This saw has all the professional contractor level features, yet is very immediate level DIY'er friendly. I'm not a professional contractor, but with this saw, my mid level DIY skills and attention to detail, the work I've done to date, looks very professionally done. My only con is that at my age, carrying a 50 to 60 lb miter saw in and out of storage every time I want to use it, is going to be a pain in alot of places. i made the mistake of choosing the "heavy duty" miter saw stand instead of the "rolling" stand. That mistake will be rectified (smile).
Date de publication: 2013-04-30
Rated 1 de 5 de par Very Dissapointed with DeWalt I bought this saw this past weekend. July 27 2019. The stand came with the saw. Great price so I got it. I had been saving up for this saw quite a long time. Wish I had bought something else. First like others that have written reviews I had on of the same issues. One of the most common was the blade dragging. The blade scored the black plastic under the kerf line. And this was prior to turning on the saw. I wanted to be proactive if this had the same issue. So then the stand had a broken quick release. (DWX723) Now I'm getting a little upset. Then finally I cut a piece of wood. What a joke.
Date de publication: 2019-07-31
Rated 5 de 5 de par Best saw I have owned I previously had the ridgid 12” saw which I was able to pick up for 100 dollars cheaper than the dewalt. The two saws don’t even compare in my opinion. After having issues squaring up the ridgid saw and the blade guard completely failing on me I returned it to Home Depot and purchased this saw. The dewalt was completely squared out of the box. Also angle adjustment on the dewalt is far superior. The slides are smoother and the overall footprint is smaller and lighter. I do recommend changing the blade that comes with the dewalt to something nicer like a diablo. Overall I highly recommend [This review was collected as part of a promotion.]
Date de publication: 2019-02-03
Rated 5 de 5 de par Awesome saw, awesome price Ordered mine online, had $200 off of price plus an online order discount, paid a little over $500, quite happy with that price. VERY IMPORTANT SOLVED ISSUE, RAIL RESISTANCE the biggest thing I had an issue with was when I first took it out of the package to test it, the saw had a lot of resistance moving on the rails, I read through the manual and looked all over to find what was causing it to bind with no luck, I was contemplating having to send it back thinking "this is why it was so cheap", luckily I kept reading for a solution and I did find out that there is a tiny little Allen key set-screw behind (almost under) the tension knob, once I adjusted that it glided without resistance, I was glad that I didn't have to return it, such a sturdy versatile saw. Note: use a 5/32 allen key to adjust it cheers!
Date de publication: 2018-04-26
Rated 4 de 5 de par Great Saw! The Dewalt DWS780 Miter Saw is a great buy for anyone wanting a powerful and reliable saw for the job site. I am a contractor and have used many miter saws, this is my favorite. The dual bevel functionality with the large fence makes for quickly handeling complicated cuts on crown and othe moldings. The fence does need to been extended out to the maximum outer setting for 45 bevel cuts. The saw weighs about 50lbs making for use with a rolling stand preferable if you plan to take it to and from jobsites. Would have rated 4.5, but couldnt. Weight and the fence adjust are only downside. [This review was collected as part of a promotion.]
Date de publication: 2018-11-12
Rated 5 de 5 de par This makes my third one I’ve been using this same saw for over 18 years. I’ve bought a bunch of other brands and a few have been ok but this saw has always been trustworthy and reliable. Several other brands have broken on the job or wear out to the point they won’t cut true any more no matter what you do. This model saw and the previous that are all very close to this same saw can be counted on to get the job done and that’s why I am writing this review. Maybe it will help someone that is trying to decide or isn’t sure about the quality of the DeWalt 12” sliding miter saw. Rest assured it is a safe bet. [This review was collected as part of a promotion.]
Date de publication: 2019-11-06
  • y_2020, m_8, d_8, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_240
  • loc_fr_CA, sid_00275512, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT