• icon-wishlist
  • icon-cart
Voir tous les produits DEWALT

Perceuse à percussion, 1/2 po, 10 A

N° d'article 00275406 N° de modèle DWD520 Format 1/2"x10A
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

La perceuse à percussion Dewalt DWD520 est équipée d'un moteur de 10 ampères qui génère une performance accrue en plus d'une excellente protection contre les surcharges. Elle se caractérise par son double usage : à la fois perceuse à percussion et perceuse, son utilisation est polyvalente, allant du bois à l'acier et la maçonnerie. La gâchette à deux doigts assure plus de confort, alors que la poignée à prise confortable et la poignée latérale verrouillable sur 360° avec prise souple offrent plus de contrôle et de polyvalence. Le choix de deux vitesses accommode vos besoins de perçage à grande vitesse ou à couple élevé. Finalement, le carter d'engrenage en métal assure une plus grande durabilité et une meilleure fiabilité sur le chantier. Garantie limitée de trois ans.

Caractéristiques

Type
Perceuse à percussion
Composante
Métal/plastique
Ampérage
10 A
Battements par minute
0 à 56 000
Tours par minute
0 à 1 200 - 0 à 3 500
Mandrin
1/2"
Vitesse
2 vitesses/2 modes
Inclus
Poignée la térale 360°, tige en acier, clé pour mandrin
Garantie
Garantie limitée de 3 ans, contrat de service gratuit d'un an, garantie de remboursement de 90 jours
Source d'alimentation
Électrique

Produits fréquemment achetés ensemble

Cordon de rallonge électrique, 12/3, 25', rouge icon-wishlist
WOODS
Cordon de rallonge électrique, 12/3, 25', rouge
Format 12/3 25'
Détails
N° d'article 74045239
Adaptateur pour protection DDFT portative, 1800 W, 15 A icon-wishlist
YELLOW JACKET
Adaptateur pour protection DDFT portative, 1800 W, 15 A
 
Détails
N° d'article 32045050
Lisière à 6 prises, protection contre surtensions, 6', jaune icon-wishlist
YELLOW JACKET
Lisière à 6 prises, protection contre surtensions, 6', jaune
Format 1.8M
Détails
N° d'article 32045053

Vous pourriez aussi aimer

Ensemble perceuse à percussion Dewalt, lithium-ion, 1/2", 20 V icon-wishlist
DEWALT
Ensemble perceuse à percussion Dewalt, lithium-ion, 1/2", 20 V
Format 1/2"x20V
Détails
N° d'article 00277187
Perceuse-mélangeur avec fil, 5/8", 9,0 A icon-wishlist
BOSCH
Perceuse-mélangeur avec fil, 5/8", 9,0 A
Format 5/8"x9.0AM
Détails
N° d'article 19836315
Marteau perforateur Xtreme Max Bulldog(TM) SDS-plus®, 1 1/8" icon-wishlist
BOSCH BULLDOG XTREME
Marteau perforateur Xtreme Max Bulldog(TM) SDS-plus®, 1 1/8"
Format 1 1/8"x8.5AM
Détails
N° d'article 19836167
Perceuse et mélangeur 8,5A icon-wishlist
MAKITA
Perceuse et mélangeur 8,5A
Format 1/2"x8.5AM
Détails
N° d'article 11975221
Trio perceuse, mélangeur et récipient icon-wishlist
MAKITA
Trio perceuse, mélangeur et récipient
Format 1/2"x8.5AM
Détails
N° d'article 11975278
Perceuse à percussion VVR, 1/2 po, 7,8 A icon-wishlist
DEWALT
Perceuse à percussion VVR, 1/2 po, 7,8 A
Format 1/2"x7.8A
Détails
N° d'article 0027199
Perceuse à percussion, 1 vitesse, 7 A, 3100 tr/min, rouge/noir icon-wishlist
CRAFTSMAN
Perceuse à percussion, 1 vitesse, 7 A, 3100 tr/min, rouge/noir
Format 1/2"x7AM
Détails
N° d'article 00276552
Perceuse à percussion à vitesse variable, 7 A, 1/2'' icon-wishlist
BOSCH
Perceuse à percussion à vitesse variable, 7 A, 1/2''
Format 1/2"x7A
Détails
N° d'article 1983278
Ensemble de visseuse à auto-alimentation icon-wishlist
QUIK DRIVE
Ensemble de visseuse à auto-alimentation
Format 1"-3"
Détails
N° d'article 39195024
Visseuse à gypse à auto alimentation icon-wishlist
QUIK DRIVE
Visseuse à gypse à auto alimentation
Format 1@3"
Détails
N° d'article 3919020
Perceuse-visseuse avec cordon, 7 A, 3/8", 2500 tr/min icon-wishlist
CRAFTSMAN
Perceuse-visseuse avec cordon, 7 A, 3/8", 2500 tr/min
Format 3/8"
Détails
N° d'article 00276555
Visseuse électrique, 0-4000 tr/min. icon-wishlist
SENCO
Visseuse électrique, 0-4000 tr/min.
Format 6.4AM
Détails
N° d'article 10595009
Perceuse électrique VVR, 3/8", 5,5 A icon-wishlist
SKIL
Perceuse électrique VVR, 3/8", 5,5 A
Format 3/8"x5.5AM
Détails
N° d'article 19835708
Perçeuse électrique VVR, 3/8 po, 7 A icon-wishlist
DEWALT
Perçeuse électrique VVR, 3/8 po, 7 A
Format 3/8"x8AMx2500TR
Détails
N° d'article 0027636
Ensemble de perceuse à percussion, 1/2" icon-wishlist
MAKITA
Ensemble de perceuse à percussion, 1/2"
Format 1/2"x6AM
Détails
N° d'article 11975408
Clé à chocs avec enclume à cheville d'arrêt, 1/2 po, 7,5 A icon-wishlist
DEWALT
Clé à chocs avec enclume à cheville d'arrêt, 1/2 po, 7,5 A
Format 1/2"x7.5A
Détails
N° d'article 0027227
Marteau rotatif à trois fonctions icon-wishlist
SKT
Marteau rotatif à trois fonctions
Format 10AM
Détails
N° d'article 59595099
Tournevis électrique VVR pour gypse 6,0 A icon-wishlist
DEWALT
Tournevis électrique VVR pour gypse 6,0 A
Format 6.0Ax115V
Détails
N° d'article 0834164
Marteau perforateur Xtreme(TM) SDS-plus®, 1" icon-wishlist
BOSCH
Marteau perforateur Xtreme(TM) SDS-plus®, 1"
Format 1"x8.00AM
Détails
N° d'article 19836183
Marteau de démolition 120 V icon-wishlist
BOSCH
Marteau de démolition 120 V
Format 120V 10AM
Détails
N° d'article 19835702
Perceuse électrique VVR, 1/2 po, 9 A icon-wishlist
DEWALT
Perceuse électrique VVR, 1/2 po, 9 A
Format 1/2"x9Ax120V
Détails
N° d'article 0027684
Marteau rotatif sans fil, 1-9/16'', Lithium Ion 36 V icon-wishlist
MAKITA
Marteau rotatif sans fil, 1-9/16'', Lithium Ion 36 V
Format 36V 1 9/16"
Détails
N° d'article 11975420
Visseuse à gypse 6,5 A icon-wishlist
MAKITA
Visseuse à gypse 6,5 A
Format 1/4"x6.5AM
Détails
N° d'article 11975212
Perceuse à percussion 6,6 A icon-wishlist
MAKITA
Perceuse à percussion 6,6 A
Format 1/2"x6.6AM
Détails
N° d'article 11975290

How do you take advantage of a price match online.

Posée par: Dom25dom25
  • y_2021, m_8, d_3, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_fr_CA, sid_00275406, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Perceuse à percussion, 1/2 po, 10 A est évalué 4.0 de 5 de 97.
Rated 5 de 5 de par Great product with lots of torque and versatility I marked it down on quality because brand new out of the box the variable speed did not work properly. On low speed you should be able to vary from 0-1,200 rpms. I got no action at all until the trigger was pushed about 1/2 way in at which time it would start at around 500 rpms and rev up from there. The rpms were way to fast for mixing sheetrock mud or paint. I exchanged the drill immediately and the new one is working perfectly so overall I gave it an excellent rating. This is a great drill with lots of torque and functionality. I happened to get a bad switch, so just be sure to check the variable speed functionality right away.
Date de publication: 2013-11-07
Rated 5 de 5 de par Great Drill ! I had a quantity of 226 holes to drill using a 3/16" bit into concrete. I have owned and/or used many other brands. This drill cuts through the concrete like it's butter! It actually performs as well as some of the much more expensive drills and way better than anything in it's class/price range. It makes the job so easy, because you don't have to lay into it with your body weight. It does the work almost by itself !! I would definitely recommend this drill to anyone.
Date de publication: 2011-04-18
Rated 1 de 5 de par Only 1yr warranty after that you pay Dewalt makes an poor quality Hammer drill. 1) Burned out motor drilling a 2-1/4" hole with a hole saw. 2) Chuck key is horrible and never keys in tight- a knuckle buster. Opens constantly. DEWALT isn't what it use to be.. If you like disposable tools buy this one. Now I have to pay 1/2 the cost of the drill plus shipping to get it fix. Purchased a RIDGID hammer drill to replace this because as a contractor I have to have the tool. Ridgid has a Lifetime warranty on parts and labor so I won't have to buy another one or pay for a repair next time.
Date de publication: 2015-01-09
Rated 5 de 5 de par Great Drill / Great Price I had to install a commercial steel door/steel frame. I knew I had 8 - 3/8 holes to drill. one side was into block, the other a brick wall. Figured I better get a drill with strength. My 15yr old 1/2in 3amp Craftsman seen its days. All of these holes had to be 4in deep. I drilled 1/4in pilot holes first then switched to the 3/8 bit. This drill ate the job up. Had all 8 holes drilled in 20min. couldn't believe it! Fastest I ever drilled through block/brick. Will enjoy not dread future jobs of concrete drilling. Tip; Drilling over 1/4in especially brick, a pilot hole is wise.
Date de publication: 2011-04-18
Rated 3 de 5 de par Good hammer drill but not at max capacity I purchased this hammer drill to install iron fence around my pool. The fence post were welded to base plates drilled for 1/2 inch anchor bolts. I needed to drill 80 holes through 4 inch thick concrete (I through drill so bolt can be pounded down into the dirt and a new bolt inserted in the hole if there is a problem). When it was working, it worked great. But, the gearbox heated up fast and after 50 holes drilled over a three day period, the gearbox really overheated, the gearbox grease oozed out and the gearbox shelled. I think this hammer drill would be good if drilling smaller holes, say 3/8 inch or less. But it does not have the backbone to stand up to its max capacity of 1/2". I learned my lesson and returned this hammer drill and purchased a rotary hammer instead.
Date de publication: 2011-12-26
Rated 1 de 5 de par Smoking Motor Using concrete to make our own concrete countertops. Mixing in a 5-gal bucket with a 1/2" paddle. Mixing to the concrete specifications, and even a little wetter for easier mixing. Sept 2014 used a 7-amp corded drill (Skil maybe?) and it started to smoke after mixing about the 4th bucket. The thinking that a 7-amp isn't robust enough, and maybe a better, trusted brand would work better. April 2015 purchased this DeWalt 10-amp drill. It started smoking on the FIRST bucket we mixed. The performance was even worse than the cheaper, weaker model. This drill was the "best" that Lowes in Shakopee had on the shelf.
Date de publication: 2015-04-06
Rated 5 de 5 de par Great Drill Recommended Amazing drill. Drilled 8 6 1/2 in deep holes with 7/16 drill bit at an airport. Airport concrete is a bit more tough than residential and it went through it like cheese. Awesome will recommend to others.
Date de publication: 2011-06-01
Rated 1 de 5 de par The chuck is worthless I bought this drill because the Black and Decker hammer drill I have had for over 20 years finally crapped out. I bought this one to replace it. I have some screws to drill into some concrete this weekend and I had 1 hole to drill into a brick to mount an A/C pullout disconnect. I started to drill the brick for my mounting hardware and every time I pulled the bit back out of the hole to remove the dust, the bit fell out. It did this repeatedly and after the 5th time I was glad I had the hole deep enough to mount my box. I have done home projects and been a Machinist for over 40 40 years and this is the most worthless drill chuck I have ever dealt with in my life! I am taking it back and replacing it with a Bosch, Milwaukee, Rigid or anything that isn't a DeWalt!
Date de publication: 2016-10-12
  • y_2021, m_8, d_3, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_97
  • loc_fr_CA, sid_00275406, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT