• icon-wishlist
  • icon-cart
Voir tous les produits TOUCH 'N FOAM

Cylindre de mousse de polyuréthane, 10 lbs, blanc

Article #76795004 Modèle #4001110001
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Le cylindre de mousse en polyuréthane «Touch 'n Foam» est un scellant en mousse haute performance et durable. La mousse de ce scellant prend de l'expansion et durcit en 30 minutes. Elle sèche complètement à toute surface en 4 heures. Ce produit est idéal pour réparer des trous et des fissures allant jusqu'à 1/2" (1,25 cm). Il fournit un joint étanche et permanent contre l'infiltration d'air, l'humidité et les insectes. Convient à la plupart des matériaux de construction communs, tels que le bois, le béton, le métal, le plastique et plusieurs autres. Facile à utiliser, ce cylindre de 10 lbs vous permettra d'effectuer efficacement une grande variété de travaux.

Caractéristiques

Type
Mousse de polyuréthane
Composante
Polyuréthane
Temps de séchage
30 minutes
Format
10 lbs
Couleur
Blanc

Vous pourriez aussi aimer

Mousse d'étanchéité, grandes fissures, 12 oz., crème icon-wishlist
GREAT STUFF
Mousse d'étanchéité, grandes fissures, 12 oz., crème
Format 12OZ
Détails
Article #56495023
Mousse d'étanchéité extensible « Great Stuff Pro » icon-wishlist
GREAT STUFF
Mousse d'étanchéité extensible « Great Stuff Pro »
Format 568GR
Détails
Article #5649016
Mousse d'étanchéité, fissures et cavités, 12 oz., crème icon-wishlist
GREAT STUFF
Mousse d'étanchéité, fissures et cavités, 12 oz., crème
Format 12OZ
Détails
Article #56495026
Mousse isolante « Dufast Ultimate », 800 g icon-wishlist
DUFAST FOAM
Mousse isolante « Dufast Ultimate », 800 g
Format 800GR
Détails
Article #13485002
Mousse extensible à dilatation triple icon-wishlist
RONA
Mousse extensible à dilatation triple
Format 340GR
Détails
Article #2000151
Mousse d'étanchéité, portes et fenêtres, 12 oz., jaune icon-wishlist
GREAT STUFF
Mousse d'étanchéité, portes et fenêtres, 12 oz., jaune
Format 12OZ
Détails
Article #56495028
Scellant-mousse tout usage DAPtex(MD) Plus, 340 g, blanc icon-wishlist
DAPTEX PLUS
Scellant-mousse tout usage DAPtex(MD) Plus, 340 g, blanc
Format 340GR
Détails
Article #04915121
eco
Mousse isolante pour portes et fenêtres et applicateur, beige icon-wishlist
LEPAGE
Mousse isolante pour portes et fenêtres et applicateur, beige
Format 453G
Détails
Article #01805226
Mousse extensible icon-wishlist
GREAT STUFF
Mousse extensible
Format 568GR
Bas Prix
Détails
Article #5649002
Mousse isolante Adfoam, version pistolet, 900 g icon-wishlist
DUFAST FOAM
Mousse isolante Adfoam, version pistolet, 900 g
Format 870ML
Bas Prix
Détails
Article #13485003
Mousse isolante icon-wishlist
GREAT STUFF
Mousse isolante
Format 568GR
Détails
Article #5649004
Mousse d'étanchéité, multi-usage, 12 oz., noir icon-wishlist
GREAT STUFF
Mousse d'étanchéité, multi-usage, 12 oz., noir
Format 12OZ
Détails
Article #56495027
Pistolet nettoyant icon-wishlist
GREAT STUFF
Pistolet nettoyant
Format 340GR
Détails
Article #5649021
Mousse d'étanchéité, Fireblock, 12 oz., orange icon-wishlist
GREAT STUFF
Mousse d'étanchéité, Fireblock, 12 oz., orange
Format 12OZ
Détails
Article #56495025
Mousse portes & fenêtres icon-wishlist
GREAT STUFF
Mousse portes & fenêtres
Format 568GR
Détails
Article #5649018
Mousse d'étanchéité en aérosol, Dow Chemical, Froth-Pak 200 icon-wishlist
DOW CHEMICAL
Mousse d'étanchéité en aérosol, Dow Chemical, Froth-Pak 200
 
Détails
Article #09825504
eco
Mousse isolante QUAD LePage pour fenêtres et portes, 598 ml icon-wishlist
LEPAGE
Mousse isolante QUAD LePage pour fenêtres et portes, 598 ml
 
Détails
Article #01805230
Mousse d'étanchéité, Dow Chemical, pulvérisable, 2bt icon-wishlist
DOW CHEMICAL
Mousse d'étanchéité, Dow Chemical, pulvérisable, 2bt
Format 2BT
Détails
Article #56495013
Mousse d'étanchéité, Pestblock, 12 oz., gris icon-wishlist
GREAT STUFF
Mousse d'étanchéité, Pestblock, 12 oz., gris
Format 12OZ
Détails
Article #56495024
Mousse à expansion icon-wishlist
GREAT STUFF
Mousse à expansion
Format 681GRxPAIL
Détails
Article #56495005
Mousse extensible icon-wishlist
RONA
Mousse extensible
Format 340GRx12OZ
Détails
Article #2000033
Mousse à expansion icon-wishlist
GREAT STUFF
Mousse à expansion
Format 681GRxPIST
Détails
Article #56495004
Mousse isolante Tite Foam, polyuréthane, 340 mL, blanc icon-wishlist
LEPAGE
Mousse isolante Tite Foam, polyuréthane, 340 mL, blanc
Format 340GR
Détails
Article #01805234
Mousse isolante icon-wishlist
DUTAB
Mousse isolante
Format 750ML
Détails
Article #1348062
Isolant mousse en aérosol icon-wishlist
DOW CHEMICAL
Isolant mousse en aérosol
 
Détails
Article #09825503

What would the sq ft coverage be to obtain an R15 value?

Posée par: dpa0_1
If you bother to look up products on the web you will get more detail of the product that you need for the job at hand this is not a filler foam to be sprayed over as a main insulation But a crack filler 1 to 2 inches max I think you can get 13,500ft out of a 10lbs bottle Closed cell spray foam avg 5 to 6 R per inch
Répondue par: Mister know it all
Date de publication: 2020-07-26

I have wather fall outdoor made in from spray fofoam what exterior fom i must used to fill wather fall

Posée par: iggy1
Thank you for your inquiry and for your interest in the DAP Touch ‘n Seal/Touch ‘n Foam products. For landscaping and water features, we recommend the use of Touch 'n Foam Landscape Filler-Adhesive.
Répondue par: DAP Product Expert
Date de publication: 2020-08-03

I want to use this product to seal the small gaps in my rigid insulation in my cold cellar. Wondering if I could fill a 3 inch gap? Also could I spray a thin layer of the foam over the entire rigid insulation currently in place?

Posée par: MattyH
Thank you for your inquiry and for your interest in the DAP Touch ‘n Seal/Touch ‘n Foam products. The DAP Touch ‘n Foam Professional 10# 1-Component Foam Sealant can be used to air seal/edge seal small gaps/voids in rigid insulation panels, however it is not designed or recommended for cavity filling. This product is designed, tested and recommend for "bead" application only (maximum bead width: up to 1/2” / 12.5 mm). Please be advised that according to Canadian residential building code, low pressure one and two component spray foams can only be used for bead (not cavity) filling/sealing applications.
Répondue par: DAP Product Expert
Date de publication: 2019-07-26

I want to fill a 9 x 13 foot garage wall that backs onto an enclosed front entrance (which goes to a second entrance). The wall is dry walled. My plan is to drill and fill. Is this the correct product for this type of use. Thank you.

Posée par: janeo
Thank you for your inquiry and for your interest in the DAP Touch ‘n Seal/Touch ‘n Foam products. We do not recommend the use of single component spray polyurethane foam products into large cavity filling applications or any of our foam products for "injection" application. Please be advised that according to Canadian residential building code, low pressure one and two component spray foams can only be used for bead (not cavity) filling/sealing applications.
Répondue par: DAP Product Expert
Date de publication: 2019-07-23

HI Im looking to fill old tires with closed cell foam for floatation we use them as mooring ball floats. what is the best foam product for this?

Posée par: marmoset
Thank you for posting your inquiry and for your interest in the DAP Touch ‘n Seal/Touch ‘n Foam products. The Touch 'n Seal 1.75 PCF Slow Rise 120 is the only product that meets the US Coast Guard requirements for flotation material 33 CFR § 183.144.
Répondue par: DAP Product Expert
Date de publication: 2019-07-20

Will this product work to re insulate my hot tub. I had a leak and had to pull off the spray foam insulation and now I need to find something to fill in the insulation.

Posée par: SirJeff
Thank you for your inquiry and for your interest in the DAP Touch ‘n Seal/Touch ‘n Foam products. For this type of application, you will need to use a two-component spray polyurethane foam such as The DAP Touch ‘n Foam Pro System 200 or 600 (larger kit). Two-component formulas are the best option when insulating the undercarriage/casework of a hot tub. Because you will likely be fully spray encapsulating the mechanical systems of the unit (plumbing and electrical), it would be strongly recommended to conduct a thorough inspection of these mechanical systems and address any concerns prior to the application of the foam, as access to these systems will be more difficult after the application of the foam. Given that there may be a need to apply foam in significant depth, please be sure that the foam is only applied at a maximum depth of 1" per pass/layer and that sufficient time is allowed between layer to permit curing and cooling.
Répondue par: DAP Product Expert
Date de publication: 2019-07-16

Can I use this foam for boat as a flotation system. Is it closed cell foam? My boat flooring was rotten and the old spray foam was wet.

Posée par: Mouamar
Thank you for your inquiry and for your interest in the DAP Touch ‘n Seal/Touch ‘n Foam products. The DAP Touch ‘n Foam Professional 10# 1-Component Foam Sealant is designed and recommend for use in "bead" style applications, it is not designed or recommended for cavity filling or for use as a flotation material.
Répondue par: DAP Product Expert
Date de publication: 2019-06-26

what R value does it have? how many feet will it cover

Posée par: Anonyme
Thank you for posting your inquiry and for your interest in the DAP Touch ‘n Seal/Touch ‘n Foam products. The Touch ‘n Foam Professional 10# 1-Component Foam Sealant has an ASTM C-518 R-Value (aged) 4.5 /in. (25 mm), the 10# cylinder yields up to 15,300 linear feet @ 1/4” bead.
Répondue par: DAP Product Expert
Date de publication: 2019-06-12
  • y_2020, m_12, d_1, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_41
  • loc_fr_CA, sid_76795004, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Cylindre de mousse de polyuréthane, 10 lbs, blanc est évalué 3.7 de 5 de 3.
Rated 3 de 5 de par Good product but The product was good but the hose leaked between where you tighten it and the hose. Even though I tightened it with a wrench I lost half the product around that connection which caused a big mess and a lot of rushing which caused more mess. The product did what it said it would but!
Date de publication: 2020-04-30
Rated 3 de 5 de par Works like a can not a sprayer I used this today and it comes out exactly like a can does so I was disappointed in that, maybe that's what I bought I just didn't realize and the packaging doesn't say sprays same as a small can does.
Date de publication: 2020-02-02
Rated 5 de 5 de par Good product I insulated my basement rim joists with rigid foam and used this to spray foam around them for an airtight seal. It did a great job and was really easy to use. I recommend tightening the hose when getting it with an adjustable wrench (just one or two turns) to make sure no air leaks. For hard-to-reach spots I just used this as the actual insulation itself and just layered it on. It’s essentially exactly like that Great Stuff gap filler but 20x better and way, way more. Good for many uses.
Date de publication: 2019-12-14
  • y_2020, m_12, d_1, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_fr_CA, sid_76795004, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT