• icon-wishlist
  • icon-cart
Voir tous les produits CRAFTSMAN

Boîte à onglets avec scie et serrage, angle réglable

N° d'article 00276748 N° de modèle CMHT20800
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

La boîte à onglets Craftsman(MD) comporte un réglage d'angles à une touche qui permet de modifier l'angle rapidement et facilement en plus de 11 butées d'angle préréglées. Il offre également un serrage rapide a came pour un travail précis et un butoir qui facilite les coupes identiques. Ses dents durcies par induction assurent une coupe franche à chaque fois. L'ensemble comprend 1 boîte à onglets, 1 scie, 1 butoir et 2 goujons de came.

Caractéristiques

Longueur
22" (55,88 cm)
Garantie
Garantie limitée à vie
Modèle
Réglable
Éléments intégrés
11 butées d'angle
Lame
Dents durcies par induction
Inclus
1 boîte à onglets, 1 scie, 1 butoir, 2 goujons de came

Vous pourriez aussi aimer

Scie à panneau, 15'' icon-wishlist
CRAFTSMAN
Scie à panneau, 15''
Format 15"
Détails
N° d'article 00276749
Scie à panneau, 20'' icon-wishlist
CRAFTSMAN
Scie à panneau, 20''
Format 20"
Détails
N° d'article 00276750
Scie à main Fuller en acier carbone, 15 po icon-wishlist
FULLER
Scie à main Fuller en acier carbone, 15 po
Format 15"
Détails
N° d'article 01215382
Scie à main Fuller en acier carbone, 20 po icon-wishlist
FULLER
Scie à main Fuller en acier carbone, 20 po
Format 20"
Détails
N° d'article 01215381
Scie tout-usage Fuller d'Innovak, 10 DPP, 22 po icon-wishlist
FULLER TOOL
Scie tout-usage Fuller d'Innovak, 10 DPP, 22 po
 
Détails
N° d'article 330733181
Mini scie à métaux de précision Fuller d'Innovak, 10 po icon-wishlist
FULLER TOOL
Mini scie à métaux de précision Fuller d'Innovak, 10 po
 
Détails
N° d'article 330733267
Scie à métaux standard Fuller d'Innovak, 12 po icon-wishlist
FULLER TOOL
Scie à métaux standard Fuller d'Innovak, 12 po
 
Détails
N° d'article 330733223
Scie égoïne SharpTooth(MC), 15", noir icon-wishlist
STANLEY
Scie égoïne SharpTooth(MC), 15", noir
Format 15"
Détails
N° d'article 00276429
Scie à métaux robuste avec cadre carré Fuller Pro d'Innovak, 12 po icon-wishlist
FULLER TOOL
Scie à métaux robuste avec cadre carré Fuller Pro d'Innovak, 12 po
 
Détails
N° d'article 330733111
Scie égoïne SharpTooth(MC), 20", noir icon-wishlist
STANLEY
Scie égoïne SharpTooth(MC), 20", noir
Format 20"
Détails
N° d'article 00276430

Could this cut 5.5 inch baseboard 

Posée par: Rob789
  • y_2021, m_5, d_11, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_fr_CA, sid_00276748, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Boîte à onglets avec scie et serrage, angle réglable est évalué 3.8 de 5 de 28.
Rated 1 de 5 de par No lock for angles! [This review was collected as part of a promotion.] This saw would be fine if you used it for 'perfect' angles. If you have odd cuts (any cuts outside the preset angles of 45,90,54,60 etc), you wont be able to cut the piece accurately. There's no locking mechanism outside of the preset angles, so its virtually impossible to cut say a 47 degree angle without the miter scale sliding all over the place, and ruining your cut. If you plan on using this saw for shoe moulding or trim in your house, you need to be able to lock into different angles. If you want perfect angled cuts that won't require wood filler or a ton of caulk and look bad, you won't be able to get them on this saw.
Date de publication: 2020-01-05
Rated 4 de 5 de par Performed as expected This is my first experience using a miter saw. I used it to cut oak 1/4" quarter-round trim to replace broken wood retaining strips on china cabinet glass doors. Despite the assembly instructions, it was fairly easy to assemble. The miter box preset cuts "locked" in precisely. The saw blade is sharp enough to perform the cuts cleanly. Cutting such small trim required bracing the trim by hand, I would imagine cutting larger trim would be easier. The saw itself was quite stable on the work bench. All in all, I am pleased with the purchase. I think the Craftsman metal miter box saw is a good value for the price.
Date de publication: 2020-11-28
Rated 4 de 5 de par Good saw [This review was collected as part of a promotion.] To be old school and not electric it’s a good miter. Good for smaller projects. Does NOT take hours to put together. Very simple to assemble for the mechanically inclined. It gets the job done well.
Date de publication: 2019-01-07
Rated 5 de 5 de par Great, Accurate Old School Miter Saw This is a fantastic tool. It’s ideal because as you make cuts the saw stays perfectly inline. Makes moulding an absolute snap. Great for small to medium projects. If this takes you an hour to put together you probably have no business using a saw. Would highy reccomend this setup!
Date de publication: 2019-06-07
Rated 4 de 5 de par Simple, nifty [This review was collected as part of a promotion.] less than 20 minutes to assemble, while watching an unrelated video and having to fetch a screwdriver. seems fairly solid, expect it will take a little patience to get repeatable results. A little looser than I would like (the upper bar has some play - maybe 1/16" - however the blade is pleasantly snug), but hopefully it won't "break in" and get any looser - decent tolerances and I expect if you're careful how you hold it it will be fine. Some notes on assembly: after looking it over, I assumed the notches in the guide rods go down in order to keep the end of the rod above the end of the hole in the casting, and thus more reliably in line with the casting angles? Also, getting the set screw to fall into the notch is a tad bit fiddly. Don't forget to put the depth stop on the rod before the saw, fig. D which is not covered in the assembly instructions. Failure to install below the saw guides will reduce the usable max height of the saw and fouls on the guides. I will update my review after using as to any discrepancies (including angle accuracy both horizontally and vertically).
Date de publication: 2019-07-16
Rated 3 de 5 de par Miter Box Review The assembly of this unit is straight forward despite the very poor assembly instructions. Getting it aligned was the most difficult part. The table of the unit is cast aluminum, everything else)except saw) is plastic. This is a nice unit for crafts or hobbies. It is tiny. Fence is 1.5 inch tall. Table is less than 15 inch long. Cutting 3.5 in moulding is a challenge. Not really made for house work.
Date de publication: 2019-07-27
Rated 5 de 5 de par Worked great for my PVC plumbing project. I bought this miter box to do some PVC plumbing work, and the blade cut it like butter. Assembly took me 12 minutes with a #2 Philips and the Allen wrench that came with it. There was only 25 pieces in the parts bag, and the set screws were already installed in the square nuts. The table and fence are one piece cast aluminum, legs are plastic but sturdy, and come with rubber pads. The four steel posts are smooth chrome plating, and slide very well. The side play between the posts and plastic guide brackets is about 1/16” total, but once you start your cut it doesn’t affect the accuracy. The angles are preset stops for cutting what looks to be picture frames or shadow boxes. In one photo the scale on the table shows the shapes for each preset stop that correlates with the shapes on the lower left corner of the shipping box. Now, if you want to get a desired angle, say 47°, you can simply flip the table over and remove the lock nut and set the spring washer aside. Install the lock nut and tighten it down once you’ve adjusted the angle you want. See photo of lock nut. It just takes a bit of ingenuity to solve this minor problem. Blade is a 14tpi. Size: H1½” x L 20¼” (inside frame to frame). Blade max height position is 4¼” above the table. Table is W4⅛” x L14⅝”, and the fence is 1⅝” tall. Angle stops are 45°, 54°, 60°, 67°, 75°, 90°, 75°, 67°, 60°, 54°, 45°. This miter box can easily handle up to 3” PVC, which is good for most home plumbing projects. I didn’t have any 4” PVC to try. I did use a pair of 6” Irwin Quick Grips to hold my pipe against the fence, worked great. This portable miter box was a great alternative to dragging out my huge 57lbs miter saw to do this smaller downstairs project. Thank you Craftsman.
Date de publication: 2020-06-29
Rated 5 de 5 de par Craftsman Miter Box/Saw [This review was collected as part of a promotion.] Used this saw to make presion cuts on both wood and aluminum, works great!
Date de publication: 2019-02-26
  • y_2021, m_5, d_11, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_28
  • loc_fr_CA, sid_00276748, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT