• icon-wishlist
  • icon-cart
Voir tous les produits REMINGTON

Coupe-bordure à essence, incurvé, 2 temps, 17", 25 cc

Article #02225229 Modèle #41AD110G883 Format 25CC 17"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.

Coupe-bordure à essence, incurvé, 2 temps, 17", 25 cc

icon-wishlist

Description

Obtenez une pelouse d'allure superbe avec un minimum d'effort grâce à ce coupe-bordure Remington. Son moteur 2 temps de 25 cc fonctionne avec un mélange essence/huile dans un rapport de 40:1 et fournit un rendement fiable. Il est doté d'un ressort amortisseur plus grand qui facilite son démarrage. La tête d'alimentation à 2 filaments de ce coupe-bordure facilite le remplacement du fil de coupe et réduit les vibrations. Il offre une largeur de coupe de 17" en un passage et fonctionne à l'aide d'un fil de coupe de 0,095" de diamètre pour plus de rigidité. Son arbre incurvé offre une portée accrue et un meilleur accès. Ce coupe-bordure léger est facile à utiliser en tout confort. Il convient donc parfaitement à des terrains plus petits d'une superficie maximale de 1/2 acre.

Caractéristiques

Système anti-vibration (O/N)
Oui
Type
Coupe-bordure à essence
Style
Mélange essence/huile 40:1
Couleur
Orange
Diamètre
Fil de 0,095" de diamètre
Cylindrée
25 cc
Alimentation du fil
Alimentation à deux fils de coupe
Fonctions
Coupe-bordure
Manche
Incurvé
Moteur
2 temps
Largeur de coupe
17" (43,18 cm)
Inclus
Coupe-bordure à essence et à fil de coupe
Garantie
Garantie limitée de 2 ans
Emballage
1 unité

Vous pourriez aussi aimer

Débroussailleuse Yard Machines, 18" icon-wishlist
YARD MACHINES
Débroussailleuse Yard Machines, 18"
 
Détails
Article #330615976
Coupe-bordures à essence, 322 L, orange icon-wishlist
HUSQVARNA
Coupe-bordures à essence, 322 L, orange
 
Détails
Article #82305344
Ensemble sans-fil coupe-bordure/souffleur, 20 V, rouge icon-wishlist
CRAFTSMAN
Ensemble sans-fil coupe-bordure/souffleur, 20 V, rouge
Format 20V
Détails
Article #22465142
eco
Coupe-bordures et taille-bordures, 10", 1,5 A, 20 V icon-wishlist
BLACK & DECKER
Coupe-bordures et taille-bordures, 10", 1,5 A, 20 V
Format 1.5AMx20Vx10"
Détails
Article #22465080
eco
Coupe-bordures/coupe-herbe électrique, 6,5 A, 14" icon-wishlist
BLACK & DECKER
Coupe-bordures/coupe-herbe électrique, 6,5 A, 14"
Format 6.5AMx14"
Détails
Article #22465104
Coupe-herbe à essence à arbre droit Yard Machines icon-wishlist
YARD MACHINES
Coupe-herbe à essence à arbre droit Yard Machines
 
Détails
Article #330615977
Coupe-bordure à essence 25 cc, arbre droit, 17", noir/orange icon-wishlist
REMINGTON
Coupe-bordure à essence 25 cc, arbre droit, 17", noir/orange
Format 25CC 17"
Détails
Article #02225415
Taille-bordure 2 temps à essence, arbre incurvé, 25 cc, 16" icon-wishlist
WEED EATER
Taille-bordure 2 temps à essence, arbre incurvé, 25 cc, 16"
Format 25CCx16"
Détails
Article #82305283
eco
Coupe-bordure sans fil, 16", 80 V, vert et noir icon-wishlist
GREENWORKS
Coupe-bordure sans fil, 16", 80 V, vert et noir
Format 16"x80V
Détails
Article #46835012
Coupe-bordure/coupe-herbe à essence, droit, 4 temps, 17" icon-wishlist
CUB CADET
Coupe-bordure/coupe-herbe à essence, droit, 4 temps, 17"
Format 25CC 17"
Détails
Article #02225223
Coupe-bordure à essence, 18", 27 CC, 2 temps, 0,095" icon-wishlist
CRAFTSMAN
Coupe-bordure à essence, 18", 27 CC, 2 temps, 0,095"
Format 27CC 18"
Détails
Article #02225408
eco
Souffleur et coupe-bordure sans fil, 20 V icon-wishlist
WORX
Souffleur et coupe-bordure sans fil, 20 V
Format 20V
Détails
Article #32515133
eco
Coupe-bordure/coupe-herbe sans fil, 13", 40 V icon-wishlist
BLACK & DECKER
Coupe-bordure/coupe-herbe sans fil, 13", 40 V
Format 40V 13"
Détails
Article #22465096
eco
Coupe-bordure électrique sans-fil, 12", 40 V, vert/noir icon-wishlist
GREENWORKS
Coupe-bordure électrique sans-fil, 12", 40 V, vert/noir
Format 12"x40V
Détails
Article #46835014
Taille-bordures à essence Cub Cadet, 22 pouces, 159 cc icon-wishlist
CUB CADET
Taille-bordures à essence Cub Cadet, 22 pouces, 159 cc
 
Détails
Article #330682280
Coupe-bordure à essence, 25 CC, 4 temps icon-wishlist
CUB CADET
Coupe-bordure à essence, 25 CC, 4 temps
Format 25CC
Détails
Article #02225410
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Coupe-bordure à essence, incurvé, 2 temps, 17", 25 cc est évalué 3.6 de 5 de 68.
Rated 5 de 5 de par Great Little Trimmer ! I was considering a cordless electric trimmer, but after reading reviews of them, I decided to just order this item instead. While I was concerned with it not being powerful enough for more than simple trimming around the yard, the price was attractive. What a pleasant surprise ! Unit is lightweight and easy to handle. And, it has more than sufficient power to cut as needed ! The only complaint I had is the D-ring handle is small. I swapped out a larger J-handle from an old brushcutter, and it solved that issue. Hope everyone who purchases this item is as pleased as I am !
Date de publication: 2013-06-07
Rated 4 de 5 de par Some Issues But Still A Good Value Bought this item online and was not available at my local stores. The free 3-day shipping was a good thing. Had several issues with line breaking, even after bumping it. Lines get tight and dont come out after bump as they are supposed to. PROS: Strong little engine The dual line works really fast Easy to handle and use Not too loud, not the quietest either but bareable Looks nice CONS: Lines break a lot Bump system does usually get the line moving You have to remove spool and guide 2 line every so often Had to undo lines several times since the fast spinning seems to compress it in the hub
Date de publication: 2014-04-16
Rated 1 de 5 de par Spend a little extra, this is garbage From the day I bought this, its been terrible. Takes 50 pulls to start (not an exaggeration); and then most of the time still doesn’t run. If/when it does finally decide to work, it will shut it self off within 2-3 minutes, and take another 20+ pulls to start again. Following the exact instructions doesn’t make a difference. The protection plate is currently electric taped on to the shaft (the screw that held it on wore off). I live in a subdivision with an average sized yard, no overly hard projects or thick vegetation to slow it down. This is legitimately the biggest piece of trash I have ever purchased. I’ll never buy a single other Remington product again. [This review was collected as part of a promotion.]
Date de publication: 2019-05-13
Rated 5 de 5 de par Great price for a very good product. I received my Remington RM2510 Weed Eater last week. I had no use for it at the current time but I decided to test it out anyway before the season starts. I filled it with a FRESH gas (FRESH being the key word) and oil mixture. Two pulls and it started right up. After reading some other reviews where others said they had problems restarting I gave it a 5 minute run and let it sit for 5 minutes. After the 5 minute rest it started back up in ONE pull. I ran it for another 10 minutes and sat it in my shed overnight (and it was COLD out that night). The next day, it started in two pulls. I was VERY pleased. Great bump line feed and it's very light compared to many other trimmers. I'd highly recommend this product. If you're going to spend over $100 on another Weed Eater you're wasting your money,
Date de publication: 2014-03-24
Rated 4 de 5 de par 2 years and still working! I bought this trimmer at another local store and use the Lowes' TruFuel 40Fuel Pre-Mixed 40:1 canned gas and NEVER had a problem starting it! I'm short, so the trimmer adjusts well for my height but it gets a little heavy #and a little hot# when I do my big yard, but I never had a hard time starting it or re-starting it. Best little trimmer I've had out of 4 I've had so far.
Date de publication: 2014-08-13
Rated 5 de 5 de par Most likely user error Not saying this product doesn't have defects. What I am saying is that people really seem to have trouble starting 2 cycle engines of any kind. So, when I saw people continued to have trouble I didn't let it stop me from buying. I paid $70 for this and its worth every penny and more. It has plenty of power for my normal sized lawn. It comes with oil to be added to one gallon of gas. Take a can, put 93 octane in it and add the oil. Mix vigorously. On the first start i did prime it a few times but typically i never prime my 2 cycle engines. Full choke, no prime, about 3 pulls and it fires and stalls. Half choke, another two pulls and she is going every time. With this type of technique I do not have trouble with this weedwacker, my leaf blower, chainsaw etc... I would have no hesitation buying this product.
Date de publication: 2017-06-07
Rated 5 de 5 de par Great machine for the $ Used it once and it worked flawlessly. Followed the simple starting instructions and the trimmer started w/o a problem. Has good balance, simple to use. Did'nt need the $200.00 industrial sized machine for my good sized yard but needed a machine not attached to a cord or battery. This was not stocked in my local store, reviews were good so ordered it online and it shipped to my home (free) within 3 bus. days.
Date de publication: 2014-05-31
Rated 4 de 5 de par Unbeatable for the price This review is coming after 1 year of use. Look, you're buying one of the most inexpensive gas trimmers around. Don't expect the world from it. BUT it performs exceptionally well! During the first couple months of use, my biggest complaint was that it was hard to start. Prime the bulb 7-8 times, switch set to 1, throttled pulled and I still had to yank 15+ times to get it to start, and even then it ran poorly for the first 90 seconds. Once up and running, it ran pretty well. The bump line feed worked well. I thought "Hey, I got what I paid for. It works." But now I guess the motor has broken in a little. Same start up procedure and it takes maybe 3 yanks to fire up and only maybe 10 seconds before it's running like a top. It bogs down a bit in the real thick stuff, but I think that's to be expected. Also, I can't get it to run on the "3" setting (guess it gets too rich), but it seems to run full speed on 2. After those first couple months, I feel like I got an exceptional deal! My word of advice, either use up the starter line it comes with before judging or just throw it away and buy some quality stuff. Next, get your mixture as close as possible to the specified 40:1 mix. Last, just allow the motor some time to break in before you lay down your final judgement on it. Actual starting tips: 1) prime 7-8 times, switch set to 1, pull throttle all the way and start yanking. If you get the "almost started" sputter, move the switch between 1 and 2 and yank it a couple more times. That should fire it up. Once it has ran a few seconds, move the switch all the way to 2. Have at it! All in all, I'm very happy with it.
Date de publication: 2015-04-12
  • y_2020, m_1, d_26, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_68
  • loc_fr_CA, sid_02225229, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT