• icon-wishlist
  • icon-cart
Voir tous les produits SHARKBITE

Clapet à bille, laiton, 3/4''

N° d'article 41215045 N° de modèle 22186LFCA Format 3/4"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Ce clapet Sharkbite(MC) est une solution facile pour installer un nouveau clapet à bille ou en remplacer un existant. Il convient aux tuyaux en cuivre, en PVC-C et en PEX, sans soudage, brides de serrage, raccord-union ou colle. Il est certifié jusqu'à 200 lb/po² et 93°C. et homologué CSA.

Caractéristiques

Format
3/4'' (1,9 cm)
Composante
Laiton
Normes
CSA homologation
Calibre
200 lb/po²
Degré
93°

Vous pourriez aussi aimer

Clapet anti retour femelle sans évent de 1 1/2" en ABS DWV icon-wishlist
IPEX HOMERITE
Clapet anti retour femelle sans évent de 1 1/2" en ABS DWV
Format 1 1/2"
Détails
N° d'article 00685530
Clapet antiretour femelle sans évent de 4" en ABS DWV icon-wishlist
IPEX HOMERITE
Clapet antiretour femelle sans évent de 4" en ABS DWV
Format 4"
Détails
N° d'article 00685532
Clapet antiretour femelle sans évent de 2" en ABS DWV icon-wishlist
IPEX HOMERITE
Clapet antiretour femelle sans évent de 2" en ABS DWV
Format 2"
Détails
N° d'article 00685531
Clapet antiretour femelle sans évent de 3" en ABS DWV icon-wishlist
IPEX HOMERITE
Clapet antiretour femelle sans évent de 3" en ABS DWV
Format 3"
Détails
N° d'article 00685533
Clapet de non-retour à battant en laiton de 3/4" fileté icon-wishlist
AQUA-DYNAMIC
Clapet de non-retour à battant en laiton de 3/4" fileté
Format 3/4"
Détails
N° d'article 01735390
Clapet de non-retour à battant en laiton de 1/2" fileté icon-wishlist
AQUA-DYNAMIC
Clapet de non-retour à battant en laiton de 1/2" fileté
Format 1/2"
Détails
N° d'article 01735389
Clapet à bille à insertion, laiton, 3/4'' icon-wishlist
SHARKBITE
Clapet à bille à insertion, laiton, 3/4''
Format 3/4"
Détails
N° d'article 41215046
Clapet à bille à insertion, laiton, 1/2'' icon-wishlist
SHARKBITE
Clapet à bille à insertion, laiton, 1/2''
Format 1/2"
Détails
N° d'article 41215044
Clapet de non-retour à battant en laiton de 1" fileté icon-wishlist
AQUA-DYNAMIC
Clapet de non-retour à battant en laiton de 1" fileté
Format 1"
Détails
N° d'article 01735391
Clapet à bille femelle, laiton, 1/2'' icon-wishlist
SHARKBITE
Clapet à bille femelle, laiton, 1/2''
Format 1/2"
Détails
N° d'article 41215047
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Clapet à bille, laiton, 3/4'' est évalué 3.2 de 5 de 6.
Rated 2 de 5 de par Not that easy These are not as easy as they say. Maybe it would have helped if there were some detailed instructions in the package. Even the internet instructions were not that great. You need a 'disconnect clip' to complete the installation and that is not mentioned. Also, I had to install this shut off valve on already installed pipe, which had no give at all. Very difficult. If it weren't for the help and physical strength of my daughter, I would still be fighting it. Took 3 hours and 2 ball valves since one got broken in the process. Once we got it in, all was good but.... not a walk in the park by any means.
Date de publication: 2018-05-26
Rated 1 de 5 de par Why is it leaking Last summer I installed a 3/4 ball valve to my outside water. It worked fine. This year I opened it back up and water is squirting out. What happened
Date de publication: 2016-06-26
Rated 5 de 5 de par End the frustration After a week of trying to repair an out of service plastic shut-off valve, my local hardware told me about the SharkBite. My old plastic supply lines were smaller than the standard replacement fittings. That frustrating week of trying to stop a leak around that old size pipe using hoarded old fittings, compression, first the purple stuff, then the glue, now tape...now putty...self made washer, o-rings almost drove me to insanity. When my rep told me that the SharkBite would adjust to my ID/OD with one push, guaranteed, it sounded too good to be true. IT WAS THAT EASY. Cutting off the section I'd been working on was the hardest part. The SharkBite simply pushed on and no leak. I was amazed and could not have been happier!!! It worked, it really, really worked with one push. No tape, no putty, no leak!!! Homeowner repairs made simple!!! I'm sure my local professional plumbers don't want me to talk about this, but I'm telling all the neighbors who have the outdated supply lines. Thank you for this product!!!
Date de publication: 2017-01-31
Rated 5 de 5 de par QUICK, EASY, JOB DONE !! [This review was collected as part of a promotion.] City is changing all water meters. Because of the 1 foot clearance it was harder to cut out and remove the old shut off tap, but install the ball valve 1 minute !! Always keep a few on hand for the unexpected leak!!
Date de publication: 2017-07-27
Rated 5 de 5 de par swap out old pipe for new Part of the copper pipe coming from my water heater corroded through. I used SharkBite connections for my new pipe installation. Easy Peasy! This product is so easy to work with and performs perfectly.
Date de publication: 2019-01-11
Rated 1 de 5 de par HARD to remove! Bad product did NOT stop the water flow, just reduced the flow in the off position. And
Date de publication: 2016-07-18
  • y_2021, m_7, d_27, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_fr_CA, sid_41215045, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT