• icon-wishlist
  • icon-cart
Voir tous les produits METABO HPT

Banc de scie avec support à roulettes Metabo HPT, 10 po, 15 A

N° d'article 37815184 N° de modèle C10RJSM Format 10"x15A
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Ce banc de scie de chantier Dewalt est équipé d'un moteur de 15 ampères qui coupe facilement et rapidement le bois dur. La lame à pointes au carbure de 40 dents mesure 10 pouces et vous assure de produire des coupes précises et constantes. D'ailleurs, il s'agit d'un excellent choix si vous effectuez des coupes longitudinales et des coupes transversales de bois ordinaire, de contreplaqué, de bois franc et de bois d'ingénierie. Le support à roues repliable est très robuste et il est conçu pour se monter et se démonter facilement. De plus, il possède des roues pour garantir un transport facile sur les terrains plus difficiles. Il s'agit d'un excellent choix pour les projets en atelier ou sur le chantier! Couvert par la garantie limitée de 2 ans de Metabo HPT.

Caractéristiques

Utilisations
Coupe du bois dur
Type
Banc de scie
Tours par minute
4 500 tr/min
Inclus
Support à roulettes
Garantie
Garantie de 2 ans
Dimensions de la lame
10'' (25,4 cm)
Composante
Aluminium
Couleur
Vert et noir
Angle de coupe
90° et 45°
Capacité de refente
35" (88,9 cm)
Capacité de coupe
3 1/8'' (7,93 cm) à 90° et 2 1/4" (5,7 cm) à 45°

Produits fréquemment achetés ensemble

Lisière à 6 prises, protection contre surtensions, 6', jaune icon-wishlist
YELLOW JACKET
Lisière à 6 prises, protection contre surtensions, 6', jaune
Format 1.8M
Détails
N° d'article 32045053
Cordon de rallonge électrique, 12/3, 25', rouge icon-wishlist
WOODS
Cordon de rallonge électrique, 12/3, 25', rouge
Format 12/3 25'
Détails
N° d'article 74045239
Adaptateur pour protection DDFT portative, 1800 W, 15 A icon-wishlist
YELLOW JACKET
Adaptateur pour protection DDFT portative, 1800 W, 15 A
 
Détails
N° d'article 32045050

Vous pourriez aussi aimer

Banc de scie Dewalt compact pour chantier, Lame de 8 1/4 po, 15 A icon-wishlist
DEWALT
Banc de scie Dewalt compact pour chantier, Lame de 8 1/4 po, 15 A
Format 8 1/4"
Détails
N° d'article 00277225
Banc de scie avec support à roulettes Dewalt, 10 po, 15 A icon-wishlist
DEWALT
Banc de scie avec support à roulettes Dewalt, 10 po, 15 A
Format 10"x15A
Détails
N° d'article 00275708
Banc de scie Kobalt de 15 A, pointes au carbure, 10 po icon-wishlist
KOBALT
Banc de scie Kobalt de 15 A, pointes au carbure, 10 po
Format 10"x15AM
Détails
N° d'article 41095003
Banc de scie de chantier Bosch 4100XC-10 avec fil, 10 po, pied à roulettes Gravity-Rise icon-wishlist
BOSCH
Banc de scie de chantier Bosch 4100XC-10 avec fil, 10 po, pied à roulettes Gravity-Rise
Format 10"x15AM
Détails
N° d'article 19836366
Banc de scie portatif, 10", 15 A icon-wishlist
BOSCH
Banc de scie portatif, 10", 15 A
Format 10"x15AM
Détails
N° d'article 19835506
Scie à céramique, 10", 15 A icon-wishlist
DEWALT
Scie à céramique, 10", 15 A
Format 10" 15AM
Détails
N° d'article 00275767
Banc de scie Craftsman de 10 po, lame à pointe en carbure icon-wishlist
CRAFTSMAN
Banc de scie Craftsman de 10 po, lame à pointe en carbure
Format 10"x15AM
Détails
N° d'article 97925013
Banc de scie Metabo HPT de 36 V, 10 po, sans fil icon-wishlist
METABO HPT
Banc de scie Metabo HPT de 36 V, 10 po, sans fil
Format 10"x36V
Détails
N° d'article 37815211
Banc de scie compact, Dewalt 10'', 15 A icon-wishlist
DEWALT
Banc de scie compact, Dewalt 10'', 15 A
Format 10"x15A
Détails
N° d'article 00275707
Banc de scie avec support 10 po icon-wishlist
MAKITA
Banc de scie avec support 10 po
Format 10"x15AM
Détails
N° d'article 11975246
Scie à table de chantier avec pied à roulettes, 10" icon-wishlist
BOSCH
Scie à table de chantier avec pied à roulettes, 10"
Format 10"x15AM
Détails
N° d'article 19836270
Banc de scie, 10", 150 A icon-wishlist
SKT
Banc de scie, 10", 150 A
Format 10"x1600Wx150AM
Détails
N° d'article 18665001
Banc de scie compact, 10 po, 15 A icon-wishlist
DEWALT
Banc de scie compact, 10 po, 15 A
Format 10"x15A
Détails
N° d'article 0027593

Does it accommodate a Dado blade?

Posée par: Swiss guy
It accommodates a Dado blade, but you need a Dado table insert as well.
Répondue par: Lucas M
Date de publication: 2021-04-03

Can you use a dado blade on this saw

Posée par: Dude2000
Under specifications in my manual , it says it can dado up to 13/16. Have at least that extending Beyond The Arbor nut with a regular blade installed
Répondue par: Renoman54
Date de publication: 2020-11-17

Who and where is the Metabo (hitachi) portable jobsite table saw made?

Posée par: Grahamrules
Label days Koki Holdings-Japan. Seems to be distributed by their Canadian branch in Mississauga. Interesting though the manual is printed in China. 
Répondue par: Cookie700
Date de publication: 2020-11-01
  • y_2021, m_6, d_13, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_fr_CA, sid_37815184, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Banc de scie avec support à roulettes Metabo HPT, 10 po, 15 A est évalué 4.5 de 5 de 270.
Rated 5 de 5 de par Legit portable table saw, good buy! [This review was collected as part of a promotion.] I’ve owned several “portable” table saws and this is the most substantial by far. I have the new Matabo branded saw and it appears they corrected the issues I’ve read about in the reviews. Worlds are good, parts are solid, and zero rust anywhere on the saw. Pretty easy to assemble and about as big as you’d want a portable table saw to be, personally I like the heft of it. I agree that even with full size sheet goods this saw would be nearly impossible to tip over if using caution and a good blade. Really great saw for the money, I’ve never had issues with any Hitachi products.
Date de publication: 2019-11-27
Rated 2 de 5 de par Major Flaw On the new C10RJ(s) model the riving knife is fixed to the motor housing and there is no way to adjust it for alignment. I have been on the phone with support multiple times and they admit there is absolutely no way to adjust it. This is a major safety issue - my riving knife is out of parallel with the blade and causes the board to want to turn and bind, which actually increases the chances of kick back. The only thing they can do to fix it is have me haul it to a service center over 70 miles away, which is going to provide unknown results. I strongly recommend staying away unless you are feeling lucky.
Date de publication: 2020-08-17
Rated 5 de 5 de par Metabo HPT Awesome Table Saw [This review was collected as part of a promotion.] Great powerful saw has tons of room, fence is tighter than a Dewalt, love the blade brake, blade is already calibrated & the large on / off switch is easy to find with out looking, no fumbling around. I’m very particular about my tools & I can’t find anything to complain about the performance of this saw, almost all the reviews are people complaining about human error missing parts not the performance of the saw, my opinion Dewalt is over rated, I’m not a weekend DIY Guy, I drag this saw from job to job & I would buy another one when this saw wears out.
Date de publication: 2019-12-10
Rated 5 de 5 de par Marvelous Machine [This review was collected as part of a promotion.] Everything about my new Metabo HPT Table Saw is marvelous! Assembly was easy, with great instructions. Love its' features - outstanding and best in class rip capacity, powerful cutting with great safety insurance, and for me, best of all, the firm, steady, wide base that the saw fits on! I've only had it since Christmas day, but already used it to cut and get ready for assembly a couple of home-based projects, with many more to come. It's a beautiful saw, and I'm counting on it to last for many, many years while I enjoy wood-working in my retirement years!
Date de publication: 2019-12-29
Rated 5 de 5 de par Accurate and powerful The built in measuring tape read out for the rip fence spacing is spot on accurate. Very powerful ripping 3/4 MDF Fast as I could run it thru. 2bys no issue either. Smooth no chipping of the melamine skin. Fence perfectly parallel to blade, smooth feed through. Really like all the features and performance for the price point. There are heavier duty made saws available for $200 more, if you use it everyday and transport to job sites it’s probably worth it. This one definitely seems well built enough to live in my shop and pull out once a month or so for a big weekend project. My work will still be better than yours with a dewalt. ;-)
Date de publication: 2020-03-27
Rated 5 de 5 de par Excellent saw I have owned my saw for a year. Used it to build kitchen and garage cabinets. Also have used it to renovate my cabin, ripping 1x8 tongue and groove boards. The blade that comes with it is alright, but do your self a favor and buy a better blade. Build of saw is excellent. All tools store on saw. Sturdiness is great and so is mobility of saw. Had to do a couple minor adjustment to fence and throat plate, besides that no big thing. My brother used the saw and likes it better then his Dewalt. What I really like is the fence extend our to 35 inches. Did a lot of research before buying. Quality ,performance, easy of use, warranty and price.
Date de publication: 2021-01-25
Rated 2 de 5 de par Major Flaw On the new C10RJ(s) model the riving knife is fixed to the motor housing and there is no way to adjust it for alignment. I have been on the phone with support multiple times and they admit there is absolutely no way to adjust it. This is a major safety issue - my riving knife is out of parallel with the blade and causes the board to want to turn and bind, which actually increases the chances of kick back. The only thing they can do to fix it is have me haul it to a service center over 70 miles away, which is going to provide unknown results. I strongly recommend staying away unless you are feeling lucky.
Date de publication: 2020-08-17
Rated 4 de 5 de par nice saw, but make sure you own a Shop-vac [This review was collected as part of a promotion.] we bought the Hitachi version of this on sale, just after they re-branded them to Metabo. The saw has some nice features; the fence moves smoothly and accurately and it's nicely portable. However, you MUST attach a shop-vac to this saw, or else all the sawdust gets kicked out right in your face. I mean, you are pelted with it. It's been decades since I've had a new table saw, maybe they're all like this now, but I think that's a lousy design. The shop-vac does of course cut out 95% of the mess though.
Date de publication: 2019-10-14
  • y_2021, m_6, d_13, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_270
  • loc_fr_CA, sid_37815184, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT