Voir tous les produits
CRAFTSMAN
Description
Ce mandrin pour scie emporte-pièce est conçu en acier au carbone trempé offrant une résistance et une durabilité accrues pour les utilisations courantes. La pointe du foret guide permet une pénétration plus rapide et réduit grandement les déplacements sur le matériau. Elle empêche ainsi le filetage de s'endommager, coupant les tiges et non les filets. Aucun outil supplémentaire n'est nécessaire, puisque le mandrin empêche le blocage de la scie trépan sur l'arbre. Enfin, la conception à changement rapide facilite l'enclenchement et le retrait de la scie cloche lorsque nécessaire.
Caractéristiques
Diamètre
3/8" (9,53 mm)
Composante
Acier au carbone
Utilisations
S'adapte aux scies à emporte-pièce de 1 1/4" à 6" de diamètre
Type
Arbre pour scie emporte-pièce
Emballage
1 unité
Vous pourriez aussi aimer
RICHARD
Croisillons pour tuiles, 1/8", paquet de 200
Format 1/8"XPK/200
Détails
N° d'article 0271250
RICHARD
Croisillons pour tuiles, 1/16 po, paquet de 200
Format 1/16"XPK/200
Détails
N° d'article 0271251
RICHARD
Truelle pour céramique, crans carrés, 4" x 9", dents de 1/4"
Format 4x9"x1/4DT
Détails
N° d'article 0271234
RICHARD
Truelle pour céramique, crans en V, 4" x 9", dents de 3/16"
Format 4x9"x3/16DT
Détails
N° d'article 0271233
RICHARD
Étendeur à adhésif en plastique, dents « scie » - 3 po
Format 3"x1/8"DT
Détails
N° d'article 0271239
RICHARD
Truelle pour céramique, crans carrés, 4" x 9", dents de 3/8"
Format 4x9"x3/8DT
Détails
N° d'article 0271235
Arbre de scie emporte-pièce, 3/8", acier carbone est évalué
de
5 de
16.
Rated 1 de
5
de
PeterH par
Not the quality I'd expect from a Craftsman tool
[This review was collected as part of a promotion.] The locking mechanism slides back and forth and locks into place by pushing a spring loaded ballbearing into a grove on the arbor shaft; sort of how a socket wrench locks onto a socket. Unless you have a hole saw attached to the arbor, there's nothing preventing that locking mechanism from being pulled too far forward. Nor is there anything holding that ballbearing in place. I accidentally pulled the locking mechanism off the arbor shaft and the ballbearing shot across the room and the spring bounced to the floor. The tool worked great for one use, but now the spring and ballbearing are lost and the arbor is rendered useless. I bought the Craftsman Quick Change Arbor because it looked like it was made better that the Lenox. What a disappointment.
Date de publication: 2019-07-11
Rated 4 de
5
de
gdave50 par
Takes a bit to figure out how to use, but useful
[This review was collected as part of a promotion.] This CRAFTSMAN tool is part of a multi-part tool set of hole saws. To use you need both an arbor, and the hole saw of the size or sizes needed. When I first opened the package for the arbor, there is no instruction on how to use. A small diagram or description would be helpful. After looking it over for a time, I figured out the "Quick Change" design. No tools are needed, and don't be tempted to unscrew any part!! To attach the arbor to the hole saw, grasp the knurled wheel, and pull it toward the back of the shaft (where it connects to the drill/driver). It should slide back fairly easily. The attach the hole saw on the threaded portion of the shaft near the drill bit end. You will then align the appropriate holes in the hole saw with the pins extending from the knurled wheel, and push the pins into the hole saw alignment holes.
Once connected together, the pieces work as a standard hole saw.
Date de publication: 2018-10-10
Rated 1 de
5
de
AustinTx par
Do not buy
It does not have any instruction on package. I tried to put it on the craftsman hole saw. Once I loosened one of lock screw, everything falls apart.
Date de publication: 2020-05-16
Rated 5 de
5
de
Tim par
Best you can buy
[This review was collected as part of a promotion.] This is the second one I’ve bought. The last one I got was 6 years ago. That’s how long it lasted. And only had to replace because I left it out side. Absolutely the best you can buy!
Date de publication: 2019-08-15
Rated 5 de
5
de
Tomcatta par
Did it’s job...
[This review was collected as part of a promotion.] I used this along with the bi-metal 2” hole saw to bore some 2” holes in plastic speaker pods on a Harley Touring bike. Worked beautifully cutting a precise hole.
Date de publication: 2019-07-14
Rated 5 de
5
de
RC par
Hole Saw Arbor
[This review was collected as part of a promotion.] I needed this for a specific project I was working on. It was perfect for the job. Quality was excellent!
Date de publication: 2019-10-31
Rated 5 de
5
de
JPA par
Worked as expected
[This review was collected as part of a promotion.] Could not locate my old arbor, so I bought this one. As stated, worked as I expected it to!
Date de publication: 2019-10-21
Rated 5 de
5
de
Tyler par
Craftsman Arbor
[This review was collected as part of a promotion.] Fits great and easy to change with different size hole saws and locks them in place also
Date de publication: 2019-04-18
LIENS PRATIQUES
Services aux consommateurs
À propos de RONA
