• icon-wishlist
  • icon-cart
Voir tous les produits CRAFTSMAN

Arbre de scie-cloche Craftsman, 3/8 po dia, pointe en croix, tige hexagonale, acier carbone

N° d'article 00276995 N° de modèle 2063303 Format 3/8"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Personnalisez vos projets de découpe de trous grâce à cet arbre de scie-cloche Craftsman. L'arbre de la scie est constitué principalement d'acier pour une résistance supplémentaire. La conception de ce modèle à changement rapide permet un enclenchement et un retrait faciles. Il est polyvalent et disponible en différentes tailles. Ce modèle pour scie-cloche a un diamètre de 3/8 po.

Caractéristiques

Diamètre
3/8" (9,53 mm)
Composante
Acier au carbone
Utilisations
S'adapte aux scies à emporte-pièce de 1 1/4" à 6" de diamètre
Type
Arbre pour scie emporte-pièce
Emballage
1 unité

Vous pourriez aussi aimer

Brides de nivellement, 200/sac icon-wishlist
MONO SERRA
Brides de nivellement, 200/sac
Format 200SC
Détails
N° d'article 84665637
Aplanissoir à coulis laminé, coin arrondi, 9" x 4" icon-wishlist
RICHARD
Aplanissoir à coulis laminé, coin arrondi, 9" x 4"
Format 9X4"
Détails
N° d'article 0271024
Pinces de nivelage pour tuiles, 3 mm, 100/sac icon-wishlist
Pinces de nivelage pour tuiles, 3 mm, 100/sac
Format 100SC
Détails
N° d'article 02715552
Coupe-tuile, 24" icon-wishlist
Q.E.P.
Coupe-tuile, 24"
Format 24"
Détails
N° d'article 35635167
Mélangeur pour composé à joints et de coulis, 24 po x 4 po icon-wishlist
Mélangeur pour composé à joints et de coulis, 24 po x 4 po
Format 24"
Détails
N° d'article 02715470
Aplanissoir à coulis, 9" x 4" x 5/16" icon-wishlist
RICHARD
Aplanissoir à coulis, 9" x 4" x 5/16"
Format 9x4x5/16"
Détails
N° d'article 0271249
Scie à carreaux icon-wishlist
HAUSSMANN
Scie à carreaux
Format 7"x120Vx5.8A
Détails
N° d'article 68125119
Cales de nivelage pour tuiles, 7/8", 100/sac icon-wishlist
Cales de nivelage pour tuiles, 7/8", 100/sac
Format 100SC
Détails
N° d'article 02715553
Éponge à coulis en caoutchouc mousse, paquet de 3 icon-wishlist
Éponge à coulis en caoutchouc mousse, paquet de 3
Format 8x5x2"xPK3
Détails
N° d'article 02715447
Grattoir à coulis, lame en carbure de tungstène icon-wishlist
Grattoir à coulis, lame en carbure de tungstène
 
Détails
N° d'article 02715367
Mélangeur icon-wishlist
RICHARD
Mélangeur
Format 30x4"
Détails
N° d'article 0271495
Grattoir couvre-plancher icon-wishlist
RICHARD
Grattoir couvre-plancher
Format 8"x3 À/TO 6'
Détails
N° d'article 0271444
Éponge à coulis professionnelle, jaune icon-wishlist
RICHARD
Éponge à coulis professionnelle, jaune
 
Détails
N° d'article 0271271
Ensemble de nivelage RUBI(MD), delta icon-wishlist
RUBI
Ensemble de nivelage RUBI(MD), delta
 
Détails
N° d'article 84666066
Ensemble d'installation de verrou de porte Irwin, ajustable, acier carbone, 7 pièces icon-wishlist
IRWIN
Ensemble d'installation de verrou de porte Irwin, ajustable, acier carbone, 7 pièces
 
Détails
N° d'article 02445449
Pinces de nivelage pour tuiles, paquet de 96 icon-wishlist
Pinces de nivelage pour tuiles, paquet de 96
Format 96/PK
Détails
N° d'article 02715486
Croisillons pour carreaux, 1/8 po, paquet de 1 000 icon-wishlist
Croisillons pour carreaux, 1/8 po, paquet de 1 000
Format 1/8"-1000PK
Détails
N° d'article 02715475
Cales de nivelage, 100/sac icon-wishlist
MONO SERRA
Cales de nivelage, 100/sac
Format 100SC
Détails
N° d'article 84665638
Éponge à coulis multi-usage à deux côtés icon-wishlist
Éponge à coulis multi-usage à deux côtés
 
Détails
N° d'article 02715471
Coupe-tuile icon-wishlist
HAUSSMANN
Coupe-tuile
Format 14"
Détails
N° d'article 68125123
Croisillons pour tuiles, 1/8", paquet de 200 icon-wishlist
RICHARD
Croisillons pour tuiles, 1/8", paquet de 200
Format 1/8"XPK/200
Détails
N° d'article 0271250
Cales de nivelage pour tuiles, paquet de 96 icon-wishlist
Cales de nivelage pour tuiles, paquet de 96
Format 96/PK
Détails
N° d'article 02715487
Scie à eau portative, 7" icon-wishlist
RUBI
Scie à eau portative, 7"
Format 120V-7"
Détails
N° d'article 84665653
Pince pour système de nivelage, noir icon-wishlist
Pince pour système de nivelage, noir
 
Détails
N° d'article 02715551
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Arbre de scie-cloche Craftsman, 3/8 po dia, pointe en croix, tige hexagonale, acier carbone est évalué 4.2 de 5 de 16.
Rated 1 de 5 de par Not the quality I'd expect from a Craftsman tool [This review was collected as part of a promotion.] The locking mechanism slides back and forth and locks into place by pushing a spring loaded ballbearing into a grove on the arbor shaft; sort of how a socket wrench locks onto a socket. Unless you have a hole saw attached to the arbor, there's nothing preventing that locking mechanism from being pulled too far forward. Nor is there anything holding that ballbearing in place. I accidentally pulled the locking mechanism off the arbor shaft and the ballbearing shot across the room and the spring bounced to the floor. The tool worked great for one use, but now the spring and ballbearing are lost and the arbor is rendered useless. I bought the Craftsman Quick Change Arbor because it looked like it was made better that the Lenox. What a disappointment.
Date de publication: 2019-07-11
Rated 4 de 5 de par Takes a bit to figure out how to use, but useful [This review was collected as part of a promotion.] This CRAFTSMAN tool is part of a multi-part tool set of hole saws. To use you need both an arbor, and the hole saw of the size or sizes needed. When I first opened the package for the arbor, there is no instruction on how to use. A small diagram or description would be helpful. After looking it over for a time, I figured out the "Quick Change" design. No tools are needed, and don't be tempted to unscrew any part!! To attach the arbor to the hole saw, grasp the knurled wheel, and pull it toward the back of the shaft (where it connects to the drill/driver). It should slide back fairly easily. The attach the hole saw on the threaded portion of the shaft near the drill bit end. You will then align the appropriate holes in the hole saw with the pins extending from the knurled wheel, and push the pins into the hole saw alignment holes. Once connected together, the pieces work as a standard hole saw.
Date de publication: 2018-10-10
Rated 4 de 5 de par Craftsman quick change hole saw arbor There are no instructions for the first-time user, so: Craftsman makes three or four different types of these arbors, and they make sizes other than 3/8, so eyeball them carefully and check your saw blade to ensure that the one you pick will actually engage your blade properly. (There is a special arbor for hole saws under about an inch and a quarter.) To use, grasp the wide ring or flange between thumb and forefinger and move it toward the butt of the arbor. It will slide up the arbor about a half inch, allowing free access to the threads on the arbor shaft below it. While holding the flange up out of the way, screw the blade onto the threads until it stops (do not force or tighten it!!). Then allow (or guide) the flange back down toward the top of the blade. You will now notice that the two lugs sticking out of the bottom of the flange will drop into two (of the four) holes in the top of the blade. You might have to back the blade down the threads just a bit to line the holes up with those lugs, which is why you didn't tighten the blade on the threads. Engage the lugs in the holes and you're good to go. (The first time using the arbor, you might have to tap the lugs into place with a rubber mallet, and tap them out again with a nail-set from within the blade when you first take the blade off. After that, they should slide in and out of blades easily.) Before you buy, make sure the holes in your blade match the lugs on the arbor!!
Date de publication: 2020-11-16
Rated 2 de 5 de par Poor condition [This review was collected as part of a promotion.] Used it once and needed to take it back. Was worn out
Date de publication: 2019-07-31
Rated 1 de 5 de par Do not buy It does not have any instruction on package. I tried to put it on the craftsman hole saw. Once I loosened one of lock screw, everything falls apart.
Date de publication: 2020-05-16
Rated 5 de 5 de par Best you can buy [This review was collected as part of a promotion.] This is the second one I’ve bought. The last one I got was 6 years ago. That’s how long it lasted. And only had to replace because I left it out side. Absolutely the best you can buy!
Date de publication: 2019-08-15
Rated 5 de 5 de par Did it’s job... [This review was collected as part of a promotion.] I used this along with the bi-metal 2” hole saw to bore some 2” holes in plastic speaker pods on a Harley Touring bike. Worked beautifully cutting a precise hole.
Date de publication: 2019-07-14
Rated 5 de 5 de par Hole Saw Arbor [This review was collected as part of a promotion.] I needed this for a specific project I was working on. It was perfect for the job. Quality was excellent!
Date de publication: 2019-10-31
  • y_2021, m_10, d_23, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_fr_CA, sid_00276995, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT