• icon-wishlist
  • icon-cart
Voir tous les produits COBRA

Ancrage «DrillerToggle» pour mur creux, 3/16" x 2", 6/pqt

Article #0484401 Modèle #363R Format 3/16"x2"xPK/6
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.

Ancrage «DrillerToggle» pour mur creux, 3/16" x 2", 6/pqt

icon-wishlist

Description

L'ancrage pour mur creux en gypse DrillerToggle(MD) offre la force de retenue d'un boulon avec ailettes à ressort et la facilité d'installation des ancrages WallDriller(MD). En effet, le mécanisme de bascule lui accorde une capacité de retenue accrue dans le gypse tandis que sa pointe autoforeuse facilite l'installation. En effet, sa bordure acérée réduit la force requise pour couper le matériau, ce qui permet un montage rapide et sans dégâts. Ce modèle mesure 3/16" x 2" et est vendu en paquet de 6 unités, mais les ancrages DrillerToggle(MD) sont disponibles dans plusieurs formats et emballages selon vos besoins.

Caractéristiques

Couleur
Blanc
Style
Pour mur creux
Modèle
DrillerToggle(MD)
Composante
Nylon/zinc
Installation
Tournevis (vis incluses)
Largeur
3/16" (0,48 cm)
Longueur
2" (5,08 cm)
Capacité
100 lb (45,36 kg)
Emballage
6/paquet

Vous pourriez aussi aimer

Ancrages avec vis « WallDriller » icon-wishlist
COBRA
Ancrages avec vis « WallDriller »
Format #8LxBT/25
Détails
Article #0484167
Chevilles avec vis icon-wishlist
COBRA
Chevilles avec vis
Format 1"xPK/10
Détails
Article #0484218
Cheville en plastique TripleGrip(TM) # 8, pqt/75 icon-wishlist
COBRA
Cheville en plastique TripleGrip(TM) # 8, pqt/75
Format #8xPK75
Détails
Article #0484436
Ancrages avec vis « WallDriller » icon-wishlist
COBRA
Ancrages avec vis « WallDriller »
Format #8LxBT/25
Détails
Article #0484168
Ancrages et vis autoforeurs «Walldriller», #8, 4 PK icon-wishlist
COBRA
Ancrages et vis autoforeurs «Walldriller», #8, 4 PK
Format #8xPK4
Détails
Article #0484471
Cheville en plastique, 1'', bte/100, blanc icon-wishlist
COBRA
Cheville en plastique, 1'', bte/100, blanc
Format 1"xBT100
Détails
Article #0484172
Cheville en plastique avec mèche TripleGrip(TM) # 8, pqt/15 icon-wishlist
COBRA
Cheville en plastique avec mèche TripleGrip(TM) # 8, pqt/15
Format #8
Détails
Article #0484437
Ancrage «FlipToggle» avec boulons, 1/4" x 2 1/2", 10/pqt icon-wishlist
FLIP TOGGLE
Ancrage «FlipToggle» avec boulons, 1/4" x 2 1/2", 10/pqt
Format 1/4"x2.5"xPK10
Détails
Article #04845651
Ancrages et vis autoforeurs «Walldriller», #6, 12 PK icon-wishlist
COBRA
Ancrages et vis autoforeurs «Walldriller», #6, 12 PK
Format #6xPK12
Détails
Article #0484477
Ancrages avec vis « WallDriller » icon-wishlist
COBRA
Ancrages avec vis « WallDriller »
Format #6xBT/50
Détails
Article #0484169
Ancrage «FlipToggle» avec boulons, 3/16" x 2 1/2", 2/pqt icon-wishlist
FLIP TOGGLE
Ancrage «FlipToggle» avec boulons, 3/16" x 2 1/2", 2/pqt
Format 3/16"x2.5"xPK2
Détails
Article #04845649
Ancrages et vis autoforeurs «Walldriller», #6, 4 PK icon-wishlist
COBRA
Ancrages et vis autoforeurs «Walldriller», #6, 4 PK
Format #6xPK4
Détails
Article #0484475
Cheville en plastique TripleGrip(MC)  # 12, 1 5/8'', pqt/8 icon-wishlist
COBRA
Cheville en plastique TripleGrip(MC) # 12, 1 5/8'', pqt/8
Format #12
Détails
Article #0484422
Cheville en plastique TripleGrip(TM) # 12, 1 5/8'', pqt/40 icon-wishlist
COBRA
Cheville en plastique TripleGrip(TM) # 12, 1 5/8'', pqt/40
Format #12
Détails
Article #0484424
Cheville en plastiqueTripleGrip(TM) # 6, pqt/6 icon-wishlist
COBRA
Cheville en plastiqueTripleGrip(TM) # 6, pqt/6
Format #6xPK6
Détails
Article #0484442
Ancrages et vis autoforeurs «Walldriller», #6, 12 PK icon-wishlist
COBRA
Ancrages et vis autoforeurs «Walldriller», #6, 12 PK
Format #6xPK12
Détails
Article #0484472
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Ancrage «DrillerToggle» pour mur creux, 3/16" x 2", 6/pqt est évalué 4.1 de 5 de 9.
Rated 5 de 5 de par What a great drywall anchor!! I was looking for something to attach a clothes drying rack in my laundry room and the studs in the wall weren't cooperating. I needed something pretty strong, so I checked out these toggle screws. They went in without a hitch using nothing but a phillips-head screwdriver and really locked down tight. Now, the only thing is you have to be sure you don't run into a stud and have plenty of space behind the drywall, but I did, luckily, and now the drying rack is firmly in place and can handle heavy, wet things like towels and bathing suits (it hangs over the laundry sink so drips are handled nicely). The product is Canadian and American made, too.
Date de publication: 2013-09-16
Rated 1 de 5 de par Terrible Terrible Product These were the biggest waste of $$. Stick with the all metal drywall anchors and you'll be happy. Had I been able to get these back out of the wall without damaging my walls further I would have returned them for a refund.. this is without a doubt the worst anchor I've ever used.. only tried them because they looked to have more depth to them. Problem with these anchors is that none of them.. and I tried 8 of them. None would tighten up.. and it just spun in the drywall. Fortunately I was able to cover the holes made by these with my shelving rails and used the all metal anchors with no issue. Again.. unless you want to destroy your drywall and not have a functional anchor.. you need to avoid these.
Date de publication: 2014-03-07
Rated 5 de 5 de par Great Holding Power but has Install Quirks The product has great holdIng power once it's installed and requires a smaller hole in the wall compared to a traditional butterfly anchor. Here's what to consider when deciding on it for an install. -The wall must not be filled with any insulation since that will prevent the holding mechanism from extending, which effectively limits the use to only internal walls. -The depth of the wall must be about 1 inch deeper than the screw length to allow the holding mechanism to extend. -The self-drilling mechanism didn't work that well for me; the shaft of the ancher got caught after the drill-head went in the wall. So, I drilled a pilot hole the same diameter of the shaft exactly where I wanted the hole. -If you need to install adjacent to a stud, you'll need to first drill the pilot hole and then hand screw the anchor into place with a screwdriver to ensure that the screw mechansism flips upward. By hand, it is easier to control the pressure to get the anchor arrow vertical; about a 1/4 turn. If it's not vertical, the mechanism will hit the stud when extending. You may want to practice this step in a wall that you can spackle if you get it wrong. The anchor can be taken out of the wall by unscrewing, however, not always very easily due to the screw mechism, which may open partially. -Once it's in the wall, screw into it until the mechanism tightens. After that, you can unscrew and re-screw as needed. I've never had a problem with the anchor once it was in. This is valuable information; may it be a blessing to you. <><
Date de publication: 2012-06-13
Rated 5 de 5 de par Great wall anchor I used these to "re-secure" a shelf which had loosened from 'screw-in" style wall anchors, so a hole already existed. (unfortunately-no studs avail) Screwed these into place (do not over tighten-no need), inserted screw through my shelf's required wall bracket, and tightened until very snug. These are a bit more expensive than some anchors, but if you want to do the job once-then use these!
Date de publication: 2014-01-19
Rated 5 de 5 de par Works exactly like I hoped they would do. I bought these (110 pound rating) to use to hold the seat base plates to the floor of my fishing boat. The original screws were pulling out of the plywood and I wanted something heavy duty to replace them. Because they are intended to self tap into drywall, I had to drill out the plywood to accommodate the toggles but that was a minor inconvenience.
Date de publication: 2013-07-10
Rated 5 de 5 de par Surprised I was surprised at the ease of installation., Care must be taken to align the arrow counterclockwise to where it be when tight. I found the 8 o'clock position to be good. also take care not to tighten too much or the sheetrock may break. Just snug up with the arrow at the 12 o'clock postion when snug. Great product!
Date de publication: 2014-01-29
Rated 5 de 5 de par Best wall anchor ever... First time I ever used this product, and it will not be the last, these anchors are the strongest, and the easiest I have ever used. Their design is fantastic, a simple idea that really worked!
Date de publication: 2014-07-21
Rated 1 de 5 de par Pure garbage, avoid All six anchors in the package failed. The screws that thread into the white metal/lead anchor stripped with two fingers on the screwdriver. Please stop selling this garbage.
Date de publication: 2019-08-10
  • y_2020, m_1, d_26, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_fr_CA, sid_0484401, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT