Voir tous les produits
TRIMMERPLUS
Description
Le taille-haies TrimmerPlus a une conception articulée qui vous permet d'incliner la lame de 22 pouces horizontalement, verticalement et entre chaque angle avec une rotation de 135 degrés. Il peut être utilisé pour atteindre et couper des arbustes et des arbustes plus grands. Sa lame articulée peut être inclinée pour créer des arbustes plats ou des arbustes bien formés. La lame de 22 pouces et le châssis moulé sous pression sont durables et faciles à utiliser. La lame extra-longue à double action permet une coupe plus rapide. La lame peut être positionnée à différents angles pour une polyvalence maximale.
- Convient à la plupart des marques de débroussailleuses qui acceptent les accessoires TrimmerPlus
- Lame ajustable à 180 degrés pour une meilleure performance
- Lame de 21'' à double rangée de dents
- Poignée robuste ajustable pour facilement contrôler la lame
- Boîtier robuste en métal
- Pour Troy-Bilt, Yardman, Yard Machines, MTD, Remington et Bolens. Convient à la plupart des marques de débroussailleuses qui acceptent les accessoires.
Caractéristiques
Compatible avec
La conception universelle se connecte à la plupart des modèles
Homologation CSA
Non
Homologation ETL
Non
Garantie
Limitée de 2 ans
Type
Accessoires pour taille-haie
Contenu de l'emballage
TrimmerPlus AH721 attachement de taille-haie à double action de 22 pouces
Matériau principal
Acier
Nom de la gamme
Trimmer Plus
Homologation UL
Non
Vous pourriez aussi aimer
LASER
Fil pour coupe-bordures électrique et esence, 0,065 po x 250 pi, bleu
Format 250'x0.065"
N° d'article 0819033
LASER
Fil pour coupe-bordure électrique Laser, 0,080 po x 160 pi, vert
Format 160'x0.080"
N° d'article 0819034
LASER
Fil pour coupe-bordures électrique/essence Laser, 0,065 po, 50 po, bleu
Format 50'x0.065"
N° d'article 0819030
LASER
Fil pour coupe-bordures électrique Laser, 0,080 po x 50 pi
Format 50'x0.080"
N° d'article 0819031
BLACK & DECKER
Bobine de rechange, coupe-bordures électrique, 0,080 po
Format 0.080"
N° d'article 2246044
LASER
Fil pour coupe-bordures à essence Laser, 0,095 po, 110 pi, orange
Format 110'x0.095"
N° d'article 0819035
HUSQVARNA
Fil de coupe-bordures Husqvarna, 200' x 0,095", argent
Format 200'x0.095"
N° d'article 82305348
BLACK & DECKER
Bobine de remplacement pour coupe-bordures, 0,065 po, 30 pi
Format 30'
N° d'article 2246005
BLACK & DECKER
Fil pour coupe-bordures Black & Decker, 0,065'', 20'
Format 20'x0.065"
N° d'article 0027050
CRAFTSMAN
Bobine de coupe-bordure Craftsman, 0,065 po, paquet/3
Format PK3-0.065"
N° d'article 22465134
HUSQVARNA
Fil de coupe-bordures Husqvarna, 200' x 0,105", orange
Format 200'x0.105"
N° d'article 82305345
CRAFTSMAN
Bobine de coupe-bordure Craftsman, 0,08 po, pqt
Format PK3-0.08"
N° d'article 22465135
HUSQVARNA
Fil de coupe-bordures Husqvarna, 200' x 0,095", orange
Format 200'x0.095"
N° d'article 82305350
BLACK & DECKER
Batterie au lithium-ion Black & Decker, 40 V MAX, 2,5 A
Format 40V 2.5AM
N° d'article 22465099
HUSQVARNA
Fil de coupe-bordures Husqvarna, 840' x 0,095", orange
Format 840'x0.095"
N° d'article 82305353
LASER
Fil coupe-bordures électrique/essence Laser, 0,065 po, 50 pi
Format 50'x0.065"
N° d'article 0819058
LASER
Fil pour coupe-bordures à essence Laser, 0,095 po, 40 pi
Format 40'x0.095"
N° d'article 0819032
LASER
Fil Laser pour coupe-bordure électrique, 0,080 po, 160 pi
Format 160'x0.080"
N° d'article 0819061
LASER
Fil Laser pour coupe-bordures à essence, 0,095 po, bobine 40 pi
Format 40'x0.095"
N° d'article 0819060
What trimmers does this fit? I have an echo pas system.
Accessoire de taille-haies TrimmerPlus, lame, 22" est évalué
de
5 de
145.
Rated 5 de
5
de
W par
Better than expected
After reading through a ton of reviews, I was somewhat skeptical at how well this trimmer would actually perform. So, out of the box, I oiled the blades (an absolute must), attached the trimmer , then began quick work of trimming every shrub, bush, and hedge on my property. Much to my delight, the blades did not get tripped up and I literally had no issues. I Even thought to myself while trimming one set of bushes that this hedge trimmer cuts like it is cutting through butter. I Am looking forward to the next time I get to use the thing. Kind of sad that I Do not have anything to cut at this time!
Date de publication: 2016-10-02
Rated 4 de
5
de
Poconojoe par
Nice attachment but lacking long enough shaft
I bought this to trim some low lying brush, I wasn't impressed on the brush cutter attachment and since this cut a much wider path I figured it would be much quicker but in order to cut at ground level you need to be bent over too far. I'm thinking about buying the branch cutter to use the extension from it so I don't have to bend so far but I really feel they should sell the extension separately so you don't have to spend $100 on an attachment you don't really need. Other then bending over it worked great trimming everything low enough I could run the mover over it in mulch mode to chop it up and I didn't even have to clean up the clippings
Date de publication: 2014-06-23
Rated 4 de
5
de
JoeC par
Good, with fixes...
I use this with a Husqvarna 128LD. Do yourself a favor when you buy this attachment: take apart the gearbox and spread everything liberally with grease. The gearbox does not come with enough grease... the same can be said for the "lower" gearbox too... the one which contains the cams which operate the cutting faces themselves.
After greasing everything up, the trimmer attachment is MUCH quieter, and operates much better. Don't forget to lube up the cutting faces with a light oil too. I use WD40.
Also, if you use a Husqvarana like I do, loosen the attachment tube, turn it 90 degrees, and reattach. This makes this attachment much easier to use, and prevents the trimmer head from operating at a weird angle when trimming horizontal surfaces.
Date de publication: 2014-07-01
Rated 1 de
5
de
marksking par
Second one
This is the second one I have owned, first one lasted for about 2 years, this one less than a year. I may have used it a maximum of 5 times. The problem is that the gears that run the blades are not well made. When the first failed, the gear blew apart, and broke the cheap pot metal housing. I figured that I did not grease the gears enough. On this one I have greased it twice, this time the lower cog that runs the bottom blade failed, Now I have lost the receipt and am stuck with another pile of junk. DO NOT WASTE YOUR MONEY.
Date de publication: 2012-07-03
Rated 5 de
5
de
Amature par
Fails
who would design a hedge trimmer to break if it hits a larger branch. Trimmer plus would. Kudos to lowes for allowing me to return these things. I tried 3 and they all broke within 15 minutes of use. If you hit anything over 1/4 inch the trimmer will destroy itself. If you are only trimming new growth it works well. Don't even bother trying to call for tech support. You will sit on hold for 10 minutes then be hung up on.
I read all the good reviews on the net and decided I must just have gotten a lemon(s) but after 3 failures I give up and am publishing this review
Date de publication: 2012-06-25
Rated 1 de
5
de
Dissed par
Broken in one use
First time I used it, it broke. I purchased the replacement warranty, so it is going back. I did not take it apart but I suspect it is the plastic gears/bushing. I will keep taking it back for the next year, maybe someone at MTD will get a clue and design a better product.
Date de publication: 2014-03-28
Rated 4 de
5
de
DIYGuy par
Works Great Mounted on Battery Powered Trimmer
Recently bought a Kobalt 80 Volt Battery Powered Trimmer. Decided to add accessories, starting with the hedge trimmer. Bought it, attached it and tried it out. Seemed to work fine. Then I read rest of instructions that stated "Not recommended for electric trimmers. Uh oh! Went back to Lowe's where I was told I had a battery powered trimmer not an electric trimmer. Their concern was cutting the cord of an electric trimmer, which you can't do with battery power. That made sense considering how many cords I cut using my regular hedge trimmer. Went back home and seriously trimmed 3 large landscape bushes where I could only work from 2 sides at most. It worked great. Unit has great reach and very good power. Job didn't take much time at all. Only con is the unit is somewhat heavy, put power and reach come at a price.
Date de publication: 2016-10-17
Rated 5 de
5
de
Dave par
No problems with this attachment
Bought this attachment 2 days ago along with a Poulan pole saw. I've read other negative reviews but so far everything works just as advertised. Spent 3 hours of almost constant use cleaning out my wife's Lantana beds and never a hiccup. See photos. I did spend quite a bit time reading the manual and making sure everything was set up in accordance. I can see how this is going to save a lot of frustration trimming up my 5 fo0ot hedge.
Definitely recommend.
Date de publication: 2017-01-13
LIENS PRATIQUES
Services aux consommateurs
À propos de RONA
