• icon-wishlist
  • icon-cart

Winter Cab for Garden Tractor - Black

Article #30735031 Model #L700423
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store. Orders typically take 3-7 days from date of order to be received at your selected store.

Winter Cab for Garden Tractor - Black

icon-wishlist

Description

Snow removal has never been easier and more delightful with this Berco cabin which is designed to protect you from harsh winter conditions. This piece of equipment is easy to install and is equipped with air vents that prevent carbon monoxide accumulation within the cab. Large windows around the cabin ensure good visibility during snow removal. Finally, the hook and loop openings give you access under the hood or to the gas tank.

Product specifications

Component
Polyester and PVC
Type
Tractor accessory
Model
Garden tractor
Color
Black
Height
Front: 55 1/4" (140.34 cm), rear: 45 1/2" (115.57 cm)
Width
40" (101.6 cm)
Length
45 1/2" (115.57 cm)
Weight
35 lb (15.88 kg)

You may also like

Lawn Tractor Rear Mounted Weight Kit - 60 lb icon-wishlist
Lawn Tractor Rear Mounted Weight Kit - 60 lb
 
Details
Article #80495147
Engine Oil - 4 Cycles - Lawn Tractor and Mower - 1.42 L icon-wishlist
ATLAS
Engine Oil - 4 Cycles - Lawn Tractor and Mower - 1.42 L
Format 1.42L
Details
Article #80495151
Craftsman Lawn Tractor Deck Drive Belt - 42" icon-wishlist
CRAFTSMAN
Craftsman Lawn Tractor Deck Drive Belt - 42"
 
Details
Article #330657061
Atlas Lawn Tractor Blade Set 42-in 2-Pack icon-wishlist
ATLAS
Atlas Lawn Tractor Blade Set 42-in 2-Pack
 
Details
Article #330064322
MTD Genuine Parts Double Bagger for MTD Riding Lawn Mowers - 30" icon-wishlist
MTD GENUINE PARTS
MTD Genuine Parts Double Bagger for MTD Riding Lawn Mowers - 30"
 
Details
Article #330682282
2-Cycle Engine Spark Plug - 3/4" icon-wishlist
FIRSTFIRE
2-Cycle Engine Spark Plug - 3/4"
 
Details
Article #02225280
Blade Set for 42" Lawn Tractor icon-wishlist
MTD
Blade Set for 42" Lawn Tractor
Format 42"
Details
Article #80495105
Double Grass Collector icon-wishlist
MTD
Double Grass Collector
Format 46"
Details
Article #80495075
Craftsman Lawn Tractor Deck Drive Belt - 46" icon-wishlist
CRAFTSMAN
Craftsman Lawn Tractor Deck Drive Belt - 46"
 
Details
Article #330657062
Atlas Replacement Mulching Blade Set 42-in 2-Pack icon-wishlist
ATLAS
Atlas Replacement Mulching Blade Set 42-in 2-Pack
 
Details
Article #330064323
MTD Genuine Parts 30-inch Lawn Tractor Mulch Kit icon-wishlist
MTD GENUINE PARTS
MTD Genuine Parts 30-inch Lawn Tractor Mulch Kit
 
Details
Article #330682283
Universal 2-in-1 Lawn Mower Blade - 46" icon-wishlist
MTD
Universal 2-in-1 Lawn Mower Blade - 46"
Format 46"x2PC
Details
Article #02225255
Universal Lawn Tractor Cover icon-wishlist
ARNOLD
Universal Lawn Tractor Cover
 
Details
Article #80495113
MTD 32-in/38-in/42-in/44-in Lawn Tractor Transmission Drive Belt icon-wishlist
MTD
MTD 32-in/38-in/42-in/44-in Lawn Tractor Transmission Drive Belt
 
Details
Article #330064295
Intek 4-Cycle Engine Air Filter/Pre-Cleaner - 5.5 to 7 HP icon-wishlist
Intek 4-Cycle Engine Air Filter/Pre-Cleaner - 5.5 to 7 HP
Format 5.5HP-7HP
Details
Article #02225276
Craftsman Lawn Tractor Deck Drive Belt -24" and 30" icon-wishlist
CRAFTSMAN
Craftsman Lawn Tractor Deck Drive Belt -24" and 30"
 
Details
Article #330657063

Inquiring what sizes the berco cab cover comes in

Asked by: jimmy diesel
Hi. As far as I know they come in a one fits all. I didn't see where different sizes were available when I ordered mine. I found it very roomy. There is lots of space for all blower controls inside the cab.There wasn't any blind spots on all four sides and it was very easy to put on. I would recommend it anyone but this the only I've had so I can't compare.
Answered by: Yantz64
Date published: 2019-05-20

will this fit a john deere 2305

Asked by: chopper 8
Not sure on this one. If you’re tractor has similar dimensions as my 10/25 then you may be okay. 
Answered by: Habs76
Date published: 2018-12-01

Will this fit a john deer 1023E tractor that I bought new this year

Asked by: Willie poo
My tractor is a10/25 do they are similar in size. I would imagine you have priced other cabs and know they are expensive. This cab will fit your tractor and keep the snow off you. I just hang mine up in the garage with a couple of straps in the summer. 
Answered by: Habs76
Date published: 2018-12-21

I have a John Deere 1025R Will this fit my tractor?

Asked by: Dootch
Will this cab fit my new  john deer 1023E tractor 
Answered by: Willie boo
Date published: 2018-11-01

will it fit a 46" craftsman tractor?

Asked by: colleen d
Everything fastens to the trailer hitch and the foot pads. So being a universal fit you shouldn't have any issues. There is some figuring involved befor you drill the holes in your foot pads.Read the instruction carefully and follow to the letter.
Answered by: buchbri
Date published: 2018-10-15

Will it fit a Kubota bx25

Asked by: Bigrig60
My tractor is a similar size to yours and the cab fit.
Answered by: Habs76
Date published: 2018-01-31

will this fit a husqvarna lawn tractor

Asked by: Jackbnimble
It is universal so it should fit. There are 4 mounting points. 2 of them are on the foot rest (drilling required) the other 2 are on a bracket that mounts to the tow hitch.
Answered by: buchbri
Date published: 2018-01-09

i have a 345 john deere will this cab fit my lawn tractor

Asked by: DOUBLE O
Yes, This is very universal.
Answered by: Casper17
Date published: 2018-01-04
  • y_2019, m_12, d_7, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_en_CA, sid_30735031, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Winter Cab for Garden Tractor - Black is rated 4.6 out of 5 by 11.
Rated 3 out of 5 by from Universal fit - not bad, functional First, allow me to say that for this price point, it's a fair value. The hardest part to this is mounting to your tractor. There are 3 spots where the mounting bars need to installed: 1. Rear hitch area 2. Front left foot rest area 3. Front right foot rest area You need to think about how you'll attach to the foot rest area. The instructions are incomplete - if you're not mechanically inclined, you may want to pay to have this installed. The instructions show drilling holes into the foot rests. In my application - John Deere X585 I mounted the front foot rest brackets to a cross member underneath the actual foot rest - I had to drill one hole and used an existing hole in the cross member. Also, I had to remove the rear trailer receiver to install their mounting plate - that means I cannot tow implements with this on - not a problem for me, but beware. I do have a 3pt hitch with Rear PTO - I was able to mount the rear plate but needed to be careful of the draft arms hitting the snow cab's mounting posts - I adjusted the sway chains to make sure this wasn't an issue. When I first looked at it though, I thought I'd have to return the cab. The canopy is a one piece item with zippers and straps galore. It's fairly cheap. I don't see getting more than 2 - 3 winters out of it but at this price point, it's disposable I suppose. One other item of note, the canopy rubs against my rear tires on both sides (due to the length of the canopy) . So there is an adjustment to make there. All in all, this is an OK purchase - I wasn't willing to part with $2500-$3000 for a real cab. I would say that if you need durability for years to come, save up for the expensive cab - but if you're ok with a product that will protect you from the elements for a couple years, this this cab will fit the bill.
Date published: 2014-10-05
Rated 5 out of 5 by from have had for over five years now I purchased this for the obvious reason, it has served me well and still holding up well. good manufacturing of side windows and cab fabric, I find it keeps me slightly warmer due to the fact it overlaps the engine hood, hence, warm motor warmer rider. if taken care of properly it will last many years as mind has and still going strong. highly recommend!
Date published: 2018-01-11
Rated 5 out of 5 by from A must have creature comfort !!! Bought mine from Lowes three years ago. The picture on the lowes site shows a long discontinued version. The version I have and is still the current improved version has on the sides and back clear vynil from the top as shown all the way to the bottom foot rests and now gives the driver a better feeling of not being so couped in and better side -ground vision. the frame is made in Canada and the fabric/vynil top is made in China. The sides have full length zippers at front and rear. This permits you to roll up the sides and tie them up and ride it open sided in warmer weather and your bundled up and feeling to hot with sides down. ( Has this capability on both sides). Only problem is leveling both sides of front cab supports, they supply two of each size spacers, 1/2 inch and 1 inch, problem with this system is that the supports can be at any various height on either side from garage floor, my solution: from hardware store or Lowes hardware, obtain 2, 1/2 inch collets with set screws(they are just called collets) these can be set at any height on the support rods as they 1/2 inch in diameter( paint on rods may obstruct fit, may have to either with round file, file inner hole to slide over paint or even faster, place end that collet wound go onto top of vice open just a bit smaller gap than diameter of rod and with flat file trim down full length of the shorter upright of the rod support as this is where the collet and support tube would slide onto. As you file away turn long end of rod in a circle to file around the rod evenenly and stopping to test slide collet until slips on and off freely. Once done your ready set all up on tractor and you will be able as per instructions set both front canopy support tubes to the same height on both sides exactly per your tape measure to match the height of the rear tubes that are supported more firmly and do not need this done as the mounts tend to be matched evenly due to mounting system. Optional: after filing for collet fit you may want to repaint filed rod, so make sure collet wiggles a bit extra for adding paint back on, I repainted mine, lowes carries Black gloss/primer paint combination made by Rust o Leum, Let it dry and cure for a few days, I leave mine for a week to cure. But as this collet only high pressure point will be the set screw against the rod, 24 hours may be OK. The tube sliding on and off will wear paint off over the years, totally unavoidable, always can hold a square of card board and spray around it any time without removing it from tractor. No need to remove support rods, can be left in place year round to save time. I do remove my rear rods as they can be replaced quickly.
Date published: 2016-01-06
Rated 5 out of 5 by from this was a great purchase, keeps me warm and dry I was surprised to see Lowes had this cab available. I had been looking for one of these for some time. The cab fit perfect with no modifications.
Date published: 2014-01-05
Rated 5 out of 5 by from Berco Snow Cab This cab is working great for my Dad. It captures the engine heat, so that is a plus during snow storms. It took us about 2 hours to install. However, some of the nuts and bolts were mismatched in the box.
Date published: 2018-01-12
Rated 5 out of 5 by from Great Cab for the money If your looking for a cab for your lawn tractor look no further. Plenty of room inside to move around an good visiblity. And only took 2 hrs to put on.
Date published: 2012-01-02
Rated 5 out of 5 by from Keeps the elements out Bought this for my 2011 Craftsman(Husqvarna build) YT4000 lawn tactor, its roomy and gives me (in cab) access to my Berco 44" snow blower controls, the quality of materials seem good with great visibility, setup was pretty straight forward. I haven't used it in -20 Celsius weather yet but I hear the engine heat takes the chill out of the cabin.
Date published: 2019-11-11
Rated 4 out of 5 by from Good quality I purchased the cab approximately 2 weeks ago and so far so good. I had no problem putting it to together by myself except my wife helped me put the canopy over top of the frame. I've only used it once but I didn't have any blind spots and everything was easy to see. I really like it up until now and I'm not expecting that to change.
Date published: 2019-02-08
  • y_2019, m_12, d_7, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_CA, sid_30735031, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT