• icon-wishlist
  • icon-cart
Product selection from VARATHANE

Finish - Bar and Table Top Finish

Article #0330195 Model #Y236000 Format 946ML
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
icon-wishlist

Description

Ultra-gloss epoxy. One pour is as thick as 60 coats of varnish. Crystal clear. Resists heat and chemicals.

Product specifications

Component
Epoxy
Color
Clear
Finish
High-gloss
Size
946 mL
Interior/Exterior
Indoor

You may also like

Clear Lacquer Spray Varnish icon-wishlist
WATCO
Clear Lacquer Spray Varnish
Format 319GRxAEROSOL
Details
Article #03305138
Clear Lacquer Spray Varnish icon-wishlist
FLECTO
Clear Lacquer Spray Varnish
Format AEROSOL
Details
Article #80455319
Clear Lacquer Varnish icon-wishlist
WATCO
Clear Lacquer Varnish
Format 946ML
Details
Article #03305137
Clear Lacquer Spray Varnish icon-wishlist
FLECTO
Clear Lacquer Spray Varnish
Format AEROSOL
Details
Article #80455322
Clear Lacquer Varnish icon-wishlist
FLECTO
Clear Lacquer Varnish
Format 946ML
Details
Article #80455320
Clear Lacquer Varnish icon-wishlist
FLECTO
Clear Lacquer Varnish
Format 946ML
Details
Article #80455323
Bar and Table Finish - 1.89 L - Ultra Gloss Epoxy icon-wishlist
VARATHANE
Bar and Table Finish - 1.89 L - Ultra Gloss Epoxy
Format 1.89L
Details
Article #03306190
Clear Lacquer Varnish icon-wishlist
FLECTO
Clear Lacquer Varnish
Format 3.78L
Details
Article #80455324
Clear Lacquer Varnish icon-wishlist
WATCO
Clear Lacquer Varnish
Format 3.78L
Details
Article #03305136
Clear Lacquer Varnish icon-wishlist
FLECTO
Clear Lacquer Varnish
Format 3.78L
Details
Article #80455321
Nu-Lustre Varnish icon-wishlist
CIRCA 1850
Nu-Lustre Varnish
Format 946ML
Details
Article #0776028

does this protect against UV rays? I need to cover a patio table that will be out in Canadian elements all year long

Asked by: fallenskies
This product doesn't have any UV inhibitors and will not protect
Answered by: Rust-Oleum Answers
Date published: 2020-08-07

How thick can I pour this product? I am making a table top with rocks in it.

Asked by: Dawnf
Hi Dawnf, It is recommended that our Varathane Bar & Table Finish be applied in 1.6 mm (1/16'') thick applications, roughly the thickness of a penny. Allow the sealer to cure for at least 4-5 hours in a dust free area before additional layers are applied.
Answered by: Rust-Oleum Answers
Date published: 2020-07-31

How many square feet does it cover?

Asked by: Bill4516
946 mL covers 0.6 sq.m. (6.4 sq.ft.) 3.78 L covers 2.38 sq.m. (25.6 sq.ft.)
Answered by: JRMD
Date published: 2020-05-09

Is this product food grade?

Asked by: damlee
Hi Damlee, Thank you for your question. Once Bar & table fully cures, it is food grade safe. Product is fully cured in 72 hours. We hope this answers your question. Feel free to contact us again if you require further information.
Answered by: Rust-Oleum Answers
Date published: 2019-05-29

Is there a recommended way to diffuse the finish so that it has a more matte appearance, say with a acrylic spray after it has set?

Asked by: Nicksten
I would recommend that you sand it with a fine grit paper and it will make it more matte.
Answered by: Rust-Oleum Answers
Date published: 2019-05-03

I want to pour a slab table that has holes in it, about 4" wide, 6-7" long and 2" thick. Can I pour it in one pour or do I need to do the holes a bit at a time to build it up to the surface of the slab then do a final pour over the whole slab? Ta, Oscar

Asked by: Oscar the Grouch
I suggest that you do the holes a 1/4 " at a time to the level of the table before applying the epoxy everywhere
Answered by: Rust-Oleum Answers
Date published: 2019-05-05

Is this product durable enough to use on a gaming table with high volume usage? i.e. a shuffle board table.

Asked by: KT BILLIARDS
This product will get scratched. We would recommend to use the Varathane Diamond Wood finish interior.
Answered by: Rust-Oleum Answers
Date published: 2019-04-26

is this isophthalmic or orthophthalmic epoxy

Asked by: frothy
The Varathane Bar and Table finish is an Amine Epoxy.
Answered by: Rust-Oleum Answers
Date published: 2019-03-05
  • y_2020, m_10, d_20, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_CA, sid_0330195, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Finish - Bar and Table Top Finish is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Great stuff!! (Follow instructions!) This stuff is really nice when completely cured. Follow the instructions!!! Coverage is pretty accurate
Date published: 2019-03-22
  • y_2020, m_10, d_20, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_CA, sid_0330195, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT