• icon-wishlist
  • icon-cart
Product selection from TYPE 1

Professional Tile Adhesive Type1 13,2L

Article #21085150 Model #1040016 Format 13.2L
Low Price
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
icon-wishlist

Description

Type 1 is a professional-grade, traditional, nonflammable, organic adhesive for setting impervious, vitreous, semivitreous and nonvitreous tile over gypsum drywall (walls only), cement board, exterior-grade plywood, concrete and masonry block. This adhesive is used for interior applications only. Type 1 meets or exceeds ANSI A136.1, Type 1 requirements.

You may also like

Large Tile Mortar - 22.7 kg icon-wishlist
MAPEI
Large Tile Mortar - 22.7 kg
Format 22.7KG
Low Price
Details
Article #21085482
Professional Tile Adhesive Type1 3,78L icon-wishlist
TYPE 1
Professional Tile Adhesive Type1 3,78L
Format 3.78L
Details
Article #21085157
Ceramic Tile Mortar - 22.7 kg icon-wishlist
MAPEI
Ceramic Tile Mortar - 22.7 kg
Format 22.7KG
Details
Article #21085067
Light Mortar for Tile & Stone - 11.3 kg icon-wishlist
MAPEI
Light Mortar for Tile & Stone - 11.3 kg
Format 11.3KG
Low Price
Details
Article #2108164
eco
Ceramic Tile Adhesive icon-wishlist
ULTRAMASTIC ECO
Ceramic Tile Adhesive
Format 3.78L
Details
Article #0706024
946-mL Wall Tile Adhesive icon-wishlist
TYPE 1
946-mL Wall Tile Adhesive
Format 945ML
Details
Article #21085151
22.7-kg Ceramic Adhesive icon-wishlist
KERABOND
22.7-kg Ceramic Adhesive
Format 22.7KG
Details
Article #0706087
Multipurpose Tile Mortar - Grey icon-wishlist
MAPEI
Multipurpose Tile Mortar - Grey
Format 4.54KG
Details
Article #2108136
22.7-kg Mortar icon-wishlist
KER
22.7-kg Mortar
Format 22.7KG
Details
Article #2108035
Tile Mortar - Kerabond T - White - 22.7 kg icon-wishlist
KERABOND
Tile Mortar - Kerabond T - White - 22.7 kg
Format 22.7KG-50LB
Details
Article #21085504
eco
Ceramic Tile Adhesive icon-wishlist
ULTRAMASTIC ECO
Ceramic Tile Adhesive
Format 945ML
Details
Article #0706041
11.3-kg Ceramic Adhesive icon-wishlist
MAPEI
11.3-kg Ceramic Adhesive
Format 11.3KG
Details
Article #2108134
Floor Tile Mortar - 22.7 kg - Grey icon-wishlist
MAPEI
Floor Tile Mortar - 22.7 kg - Grey
Format 22.7KG
Details
Article #2108204
11.3 kg Mortar icon-wishlist
MAPEI
11.3 kg Mortar
Format 11.3KG
Details
Article #2108176
22.7 kg Mortar icon-wishlist
MAPEI
22.7 kg Mortar
Format 22.7KG
Details
Article #2108177
22.7-kg "Ultraflex 2" Mortar icon-wishlist
ULTRAFLEX
22.7-kg "Ultraflex 2" Mortar
Format 22.7KG
Details
Article #21085152
eco
Ceramic Tile Adhesive icon-wishlist
ULTRAMASTIC ECO
Ceramic Tile Adhesive
Format 13.2L
Details
Article #0706048
3.79-L Premixed Mortar icon-wishlist
PREMIXED MORTAR
3.79-L Premixed Mortar
Format 3.79LT
Details
Article #21085467
KERDI-FIX Adhesive for Schluter Bathroom Builds - 290 mL icon-wishlist
SCHLUTER SYSTEMS
KERDI-FIX Adhesive for Schluter Bathroom Builds - 290 mL
Format 290-ML
Details
Article #09685480
Glass Tile Mortar icon-wishlist
ADESILEX
Glass Tile Mortar
Format 4.54KG
Details
Article #21085446
Adhesive Tape Anti-Slip - 2'' x 60' - Black icon-wishlist
CANTECH
Adhesive Tape Anti-Slip - 2'' x 60' - Black
Format 2"x60'
Details
Article #00545086
Anti-Slip Adhesive Tape - 1" X 60' - Black icon-wishlist
CANTECH
Anti-Slip Adhesive Tape - 1" X 60' - Black
Format 1"x60'
Details
Article #00545085
13.25-L Premixed Mortar icon-wishlist
PREMIXED MORTAR
13.25-L Premixed Mortar
Format 13.25LT
Details
Article #21085468
Glue - Polymer-Modified Cement Glue icon-wishlist
RONA X-PERT
Glue - Polymer-Modified Cement Glue
Format 22.7KG
Low Price
Details
Article #2000044
"Keraply" Ceraminc Adhesive 8kg - White icon-wishlist
KERALASTIC
"Keraply" Ceraminc Adhesive 8kg - White
Format 8KG
Details
Article #0706090

Can this be used to attach tiles to schluter Kerdi board? And to mortar the Kerdi fabric tape?  Is it modified or unmodified? Thank you

Asked by: Bramblewood
Mastic should never be used to adhere tile to Kerdi Board. Schluter does not warranty tile applications where any mastic adhesive is used. Mastic not only takes much longer to set up, but the adhesion strength is quite inferior. If you are using Schluter products you should always use an approved thin set.
Answered by: yourdreambuilder
Date published: 2019-01-26

Hello, Would there be a mapei product suitable to install sliced river stone (cut 1" to 2" thick) to a sheet of rough plywood for the surround of my fireplace insert. Looking to cut the stones with a wet tile saw?

Asked by: Uncle Paulie
  • y_2020, m_9, d_17, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_CA, sid_21085150, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Professional Tile Adhesive Type1 13,2L is rated 4.0 out of 5 by 75.
Rated 5 out of 5 by from Wall Tile Adhesive As a professional installer I recommend this product on walls only... not flooring. For floors use a good to high quality mortar product, latex based mixed to the same consistency in every batch. This is an excellent product on walls even over cement board. A dry surface skin will prevent adhesion if the tile is not installed on the glue surface in a timely manner. On some tiles I apply the glue to the wall and a thin flat troweled layer of glue to the tile to ensure adhesion. I've only used the previous method on glass and marble. Glass and Marble does not seem to absorb the glue as well as clay based tiles. If installed correctly this product will hold the tile for decades.
Date published: 2017-01-30
Rated 5 out of 5 by from Good stuff- other review didn't do it correct This product is meant to be used for quick applications such as a backsplash or any other wall tile that won't have any walking traffic. If you're putting tile down on backer board or on concrete for floor tile you need to use a bag of tile mortar (not rapid set) and mix it to ensure a good quality Bond. If you don't that is your own fault that you didn't do the research. Also you really don't want to use this in any walk-in showers or shower surrounds.
Date published: 2016-12-17
Rated 5 out of 5 by from Very good product. I've used this product for years professionally installing backsplashes with great results. This is a backsplash only adhesive and a good one at that.
Date published: 2016-12-23
Rated 5 out of 5 by from Good for its intended purpose. Read the label! This has been a tremendous help setting my tile mosaic backsplash, because you end up in intricate corners where you can't just apply all the adhesive at once and then stick it on, because there are a ton of tiny cuts to make. If I'd been mixing thinset each time, I'd be using a measuring cup, and probably wasting a bunch - with this I can pop it open, give it a stir, and set those finishing tiles 8 or 10 at a time, close it up, go cut 10 more (any more than that, with irregular length tiles, and it's too easy to lose track of where they go.) Once or twice I've discovered I've made a mistake, maybe 4-6 hours later, and I had to pry the tiny tiles off the wall with a screwdriver, so the adhesive cures fine. However! Like I said above, pay attention to the label - this stuff is only intended for floor tiles up to 4"x4" I believe. That's inches, not feet. It's an adhesive, not a thinset, so it doesn't dry the same, and the bigger the tiles, the longer it takes to cure - up to 72 hours in some conditions (per the label, for my mosaic tiles it's solid as a rock in half a day.) So if you buy this expecting to lay 12x12, 12x24, or 18x18 tiles on the floor, you're going to get bad results. By the label you can lay 12"x12" tiles on the wall with this, because they're not going to bear that kind of load, but for my money, laying 12" tiles I'd be using real thinset anyway, floor OR wall. This is great for backsplashes, mosaics etc, but use case aside, it'd be way too expensive to do a whole room with it. A bucket, a mixing bit for a drill, and a huge bag of thinset would be cheaper than one container of this, and easily go twice as far. But for small jobs, like backsplashes, etc, where it doesn't make sense to mix up thinset to lay what amounts to 1 sq ft of tile at a time, then this stuff is great. There are more reviews for this on the Lowes.ca (Canada) site, that tell the similar story - people who use as directed are satisfied. The ones who give it a 1 star rating are complaining that after 24 hours they can peel up their 12x24 tiles and it's still wet.
Date published: 2016-03-12
Rated 5 out of 5 by from easy I like the fact that it cleans off with water, and it washes out of my clothes!!! Important to me, because I am always wiping my hands on my jeans. It is important not to get dust on the surface you're installing on, or you'll have loose tiles.
Date published: 2017-02-28
Rated 1 out of 5 by from ...surprised this product is even sold. I laid tile in a 220 sq ft space on correctly prepared concrete; one month later, I'm having to rip out the tile due to the lack of adhesion of this product. While I was pulling up the tile, the adhesive was "dry" but it peeled up with a putty knife with little effort and is almost chalky. I'm replacing the tile and adhesive however, am using Mape Rapid Setting Tile Mortar #feels more like concrete than chalk, when dried#. I can already tell the difference in quality. After looking up reviews online #not on Lowe's#, we found bad review after bad review regarding this product. Tough lesson learned. Pros - it's smooth, easy to work with, and it's being premixed saves time and muscle on mixing your own adhesive. Cons - it doesn't stick - within a month the tiles lose their adhesion. Pros are obsolete if the product doesn't work.
Date published: 2015-08-01
Rated 5 out of 5 by from Perfect! This adhesive is great because it stays moist in the container while the dry mix hardens within two hours. I used this to place porcelain tile on my new bathroom floor and walls without any adverse issues. I will be using the dry mix inside my walk-in shower. If I had known porcelain was so hard and prone to cracking when cutting it I never would have bought it.
Date published: 2018-07-05
Rated 2 out of 5 by from DO NOT BUY! pay the extra get another brand This product is the worst glue I have ever used installing tiles. I am giving it 2 stars because it hasnt failed but as far as usability. the glue is half rubber like you have to kneed it to get it to a state that can be used. so instead of pulling out a nice glob and go right to trowing, you have to work the glob until it is smooth then spread it. this adds a couple minutes each time. which we all know time is important, i would not buy this brand ever again. its the only brand to make my wrist hurt after a 5x5 section, very disappointed
Date published: 2018-03-08
  • y_2020, m_9, d_17, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_75
  • loc_en_CA, sid_21085150, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT