Product selection from
TOUCH 'N FOAM
Description
Flame resistant, all-purpose foam sealant. 454 g. Fill & seals service penetrations. Blocks air infiltration to reduce fire spread into walls and ceilings.
You may also like
GREAT STUFF
Insulating Foam - Window and Door - 12 oz. - Yellow
Format 12OZ
Details
Article #56495028
GREAT STUFF
Insulating Foam - Gaps and Cracks - 12 oz. - Cream
Format 12OZ
Details
Article #56495026
ADFOAM
Adfoam Minimal Expansion Insulating Foam - Frames, Doors and Windows - Strawgrade Version - 800 g
Format 750ML-800GR
Details
Article #13485002
DUFAST FOAM
Adfoam Minimal Expansion Insulating Foam - Frames, Doors and Windows - Gungrade Version - 870 g
Format 870ML
Details
Article #13485003
DAPTEX PLUS
DAPtex(R) Plus Multi-Purpose Foam Sealant - 340 g - White
Format 340GR
Details
Article #04915121
LEPAGE
Tite Foam Insulating Foam - Polyurethane - 340 mL - White
Format 340GR
Details
Article #01805234
LEPAGE
Insulating Foam for Doors and Windows - Polyurethane - Beige
Format 453G
Details
Article #01805226
ADFOAM
Adfoam Insulating Foam - Minimal Expansion - 680 g
Format 600ML-680GR
Details
Article #1348006
GREAT STUFF
Sealant - "Great Stuff Pro" Expanding Foam Sealant - 20 oz
Format 20OZ
Details
Article #56495008
Can this foam be used around a vent pipe from a gas fireplace that goes through the outside wall?
Thank you for posting your inquiry. DAP Touch 'n Foam FIREBREAK FOAM SEALANT is not designed or recommended for use in sealing high temperature application surfaces (such as stove pipes and chimneys). Should you have any additional questions or require further assistance, please feel free to contact DAP’s Technical Customer Service Department at 888-327-8477.
Date published: 2021-02-22
Hi, I wonder if your "Touch 'n Foam Flame Resistant Sealant" (Item#: 308130) is a "BC Building Code" compliant product to be used as a "Fire Stopping" material? Can it be used as to seal joints in a 1 or 2 hour fire-rated wall or ceiling? Thanks
Thank you for posting your inquiry and for your interest in the DAP Touch ‘n Foam products. The DAP Touch ‘n Foam FireBreak Foam Sealant is not designed or recommended for applications requiring an "Hourly Fire Rating". Should you have any additional questions, please feel free to reach out to DAP’s Technical Customer Service Department at 888-327-8477.
Date published: 2020-12-19
By fire code in Ontario I have to cover the spray foam in my rimjoists in my basement. It’s a hassle to cut out pieces of drywall to cover it all which is what people do. Can I use this stuff instead and still have it pass code?
no most likely as this stuff is actually not a fire break or stop. It is an acceptable solution for protections for residential construction by some city inspectors. You will need to use 5/8 x-type drywall (firerated); plywood/wood that is secured; or easiest if your inspector allows: 5-1/2" of rockwool insulation pushed against the sprayfoam
Date published: 2019-05-10
How many hours is this foam rated at?
Thank you for posting your inquiry. The DAP Touch 'n Foam Fire Break Foam Meets UL 1715, UL 94 V-O, modified ASTM E814 for use as an approved fireblock penetration sealant. This product does not claim an "hourly rating".
Date published: 2019-02-26
Can I use this to insulate exhaust vent for gas heater in garage near drywall
Thank you for your inquiry and for your interest in the DAP Touch ‘n Seal/Touch ‘n Foam products. Cured polyurethane foam products are combustible, as such, these products should not be exposed to temperatures above 240°F (116°C), open flames or sparks, nor are they recommend for use in high heat applications.
Date published: 2018-11-21
Gas fire place has air draft that comes in. Hot water line is close to air draft. Installer did not seal the vent properly my hot water line gets frozen when temp is -10 or lower, can I uses this product, as the vent creates heat from the fire place?
Yes. It is fire/heat resistant.
Date published: 2019-07-29
Can I use this to fill the gap around a dryer where it exits the house? Or would that be to warm?
Thank you for your inquiry and for your interest in the DAP Touch ‘n Seal/Touch ‘n Foam products. When fully cured, Touch 'n Foam Fire Break has a service temperature of 250ºF (121ºC).
Date published: 2018-12-17
Is this product meet or exceed the OBC when applied in basements
The Ontario Building Code has many sections dealing with polyurethane foam. We do not know which section you are referring to.
Touch N Foam Professional polyurethane spray foam system 15/200/600 have the following CCMC listing: • Complies with CAN/ULC S711.1-05 for Bead Applications CCMC 13600-L Evaluation Listing.
• Class 1/A fire rated formula.
Date published: 2018-05-03
Helpful Links
Customer Services
About RONA
