• icon-wishlist
  • icon-cart
Product selection from EASYHEAT

Tape - Automatic Heating Tape

Article #0356028 Model #AHB118 Format 126WX18'
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store. Orders typically take 3-7 days from date of order to be received at your selected store.

Tape - Automatic Heating Tape

icon-wishlist

Description

Tape.

You may also like

WarmlyYours Environ™ 1.5-in x 45-in 240V Aluminum Foil Flex Roll icon-wishlist
WARMLYYOURS
WarmlyYours Environ™ 1.5-in x 45-in 240V Aluminum Foil Flex Roll
 
Details
Article #330005873
Stelpro Heating Cable - 744.4' - 208-240 V icon-wishlist
STELPRO
Stelpro Heating Cable - 744.4' - 208-240 V
Format 744.4'-2850W-240V
Details
Article #03915273
WarmlyYours Environ™ 1.5-in x 40-in 240V Aluminum Foil Flex Roll icon-wishlist
WARMLYYOURS
WarmlyYours Environ™ 1.5-in x 40-in 240V Aluminum Foil Flex Roll
 
Details
Article #330005874
HEATING CABLE icon-wishlist
WARMWIRE
HEATING CABLE
Format 48-72SFx120V
Details
Article #0679394
Tape - Automatic Heating Tape icon-wishlist
EASYHEAT
Tape - Automatic Heating Tape
Format 280WX40'
Details
Article #0356032
Floor Heating Cable - 888' - 3400 W - 240 V - White icon-wishlist
STELPRO
Floor Heating Cable - 888' - 3400 W - 240 V - White
Format 888'-3400W-240V
Details
Article #03915274
WarmlyYours Environ™ 1.5-in x 30-in 240V Aluminum Foil Flex Roll icon-wishlist
WARMLYYOURS
WarmlyYours Environ™ 1.5-in x 30-in 240V Aluminum Foil Flex Roll
 
Details
Article #330005875
HEATING CABLE icon-wishlist
WARMWIRE
HEATING CABLE
Format 40-60SFx120V
Details
Article #0679395
Tape - Automatic Heating Tape icon-wishlist
EASYHEAT
Tape - Automatic Heating Tape
Format 420WX60'
Details
Article #0356033
Roof deicing cable icon-wishlist
EASYHEAT
Roof deicing cable
Format 240'X1200W
Details
Article #0356023
WarmlyYours Environ™ 1.5-in x 35-in 240V Aluminum Foil Flex Roll icon-wishlist
WARMLYYOURS
WarmlyYours Environ™ 1.5-in x 35-in 240V Aluminum Foil Flex Roll
 
Details
Article #330005876
HEATING CABLE icon-wishlist
WARMWIRE
HEATING CABLE
Format 24-36SFx120V
Details
Article #0679397
WarmlyYours Environ™ 1.5-in x 8-in 120V Aluminum Foil Flex Roll icon-wishlist
WARMLYYOURS
WarmlyYours Environ™ 1.5-in x 8-in 120V Aluminum Foil Flex Roll
 
Details
Article #330005893
APPLICATION TAPE icon-wishlist
EASYHEAT
APPLICATION TAPE
Format 30'X1/2"
Details
Article #0356036
Freeze Protection Cable icon-wishlist
EASYHEAT
Freeze Protection Cable
Format 21W 3' 120V
Details
Article #0356024
Floor Heating Cable - 80' - 240 V - 240 W icon-wishlist
STELPRO
Floor Heating Cable - 80' - 240 V - 240 W
Format 80'-240W-240V
Details
Article #03915137

Can the heat line be installed inside the water line, NOT on the outside of the water line?

Asked by: lbcowan
No.
Answered by: SomnabulantMaven
Date published: 2018-12-30

I am running two plastic pipes, one hot and one cold water, from inside my home to an out side building with on demand heat only. Can I tape the 2 pipes with the sensor cable together with the heat sensor  on one of the pipes? please advise

Asked by: Henning
No they need to be independently heat traced and insulated so the heat trace can regulate the temperature better
Answered by: Sparky89
Date published: 2018-10-19

After I install the heat tape, can I wrap the pipes and tape with pipe foam insulation? What is the recommended kind of pipe insulation, foam or fiberglass? (to avoid the risk of fire)

Asked by: JackieSh
we found that there was no reason to wrap the pipes after installation of the heating cable,....but the should be no difference if insulation were to be used.....would recommend the foam....
Answered by: stonehead
Date published: 2019-01-28

what if is not straight

Asked by: josewales
- cable bends / conforms to pipe, ...attach with plastic ties.
Answered by: stonehead
Date published: 2018-03-16

I been doing a little research into what I can purchase to keep a outdoor 100lb propane tank warm as the cold drop the last few days are causing pressure issues and I wanna know if these would work or if there is something else recommend for that purpose?

Asked by: Austin101

I am wanting to run plastic pipe water line from my cottage to my garage above ground. The length is 75 feet. Do i just attach the heat trace to the pipe and let the pipe sit on the ground? Or does it have to be covered?

Asked by: Lake water

Package indicates the item should only be used on water pipes. I wish to use the item in 3 ft and 6 ft long aluminum 3" x 3" down spout extensions sloped on a 20 degree angle below horizontal and fed from a  GFI. Can I do so?

Asked by: ppdave

can this be used on pvc or pex pipe

Asked by: GarryW
  • y_2019, m_12, d_6, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_CA, sid_0356028, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Tape - Automatic Heating Tape is rated 3.3 out of 5 by 4.
Rated 4 out of 5 by from Freeze Saver This is still new to me so I may update later. The recent extended freeze in San Diego (I'm at 1700 feet) caused my well pump pressure switch to freeze up. I purchased this 18' heat cable and a 6' cable for an exposed filter assembly. Such products are hard to find in San Diego area, but the Escondido store had quite a few in several different lengths (Plumbing department item). They were easy to install and have proven very effective- weather has been colder than when it initially froze up, yet I have not had a repeat of the problem. You'll need a local 110VAC outlet, and suitable high-temp electrical tape or insulation wrap, which are not supplied with the cable. Installation was straightforward and simple. Instructions are generally above average. These appear to be made in Mexico, rather than China, and at least outwardly appear to be of good materials, fit, and finish. We'll see how the cables perform over coming days and update if necessary.
Date published: 2013-01-14
Rated 4 out of 5 by from If it works in Canada - it'll work anywhere! We live in Alberta, Canada and our winters can fall to below -50 degrees Celsius and colder with the windchill. Hasn't been quite that cold yet this year but our water froze up on Christmas Eve and it turned out that our original Easy Heat tape had been chewed through by some type of critter. We replaced it, and within an hour we had glorious running water again! I will say that the one issue I have with these is that the indicator light on the cord does not shut off when there is damage to the cord. We assumed the heat tape was fine because the indicator light was still on - don't rely on this! We had to manually feel the pipe under the insulation to find that it was frozen solid.
Date published: 2016-12-28
Rated 1 out of 5 by from Easy Heat = Junk This was installed by a professional jobber on my main water inlet. It lasted two months and then failed on Christmas Day, causing my water line to freeze solid. On boxing day I bought an identical replacement, which then failed again as soon as I plugged it in. Easy Heat cables have serious quality issues and will fail when you need them most. Real quality cables from Raychem or Thermon cost quite a bit more but will actually last years, not days. Please save yourself endless grief and avoid Easy Heat cables.
Date published: 2016-09-14
Rated 4 out of 5 by from Product does what it is supposed to do....simple to install.
Date published: 2018-02-14
  • y_2019, m_12, d_6, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_CA, sid_0356028, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT