
Description
This Irwin straight-shank installer wood drill bit is designed to make it easy for you to pull wires through walls, ceilings and floors. The flute and shank have a hole that allows for wire pulling applications. The drill bit has an 82-degree point that offers fast, smooth drilling through wood. It also has a 3-flattened shank that secures firmly in the drill chuck, so you don't have to work about your bit slipping.
Product specifications
Diameter
1/4" (0.635 cm)
Packaging
Each
Piece Length
18" (45.72 cm)
Type
Straight shank installer wood drill bit
Utilization
Drilling in wood; easy wire pulling through walls, ceilings and floors
Flute
Hole in flute for wire pulling
Angle
82° point
Shafts
3-flatted shank with hole
Component
Metal
You may also like
Straight Shank Installer Wood Drill Bit - 1/4" x 18" is rated
out of
5 by
18.
Rated 5 out of
5
by
NS-PHL from
Worked like a charm!
[This review was collected as part of a promotion.] I needed a long drill bit that would help me fish a low voltage wire through an exterior wall. The drill bit was easy to use and did not spin thanks to the hex base. It was a good size to allow me to pull a wire through the wall. It's pretty strong, has good flexibility. I took a little break to adjust my grip and check my drilling direction, and the drill was happily hanging from the bit, and was mostly horizontal. I wish there was a hole at the base to double up as a fishing tool, but that's just me.
Date published: 2019-03-27
Rated 5 out of
5
by
Dave from
More than a little bit
[This review was collected as part of a promotion.] Drill bit used to drill hole for lamp cord. It worked great and lamp works great. This lamp is a keep sake that was made from raw cedar that he had cut down as it had overgrown the area it was located. He had turned it on a lathe but ran the cord down the side of the lamp which caught on everything. The drill gave me the opportunity to drill the lamp and using a router, groove the base to allow the cord to exit the bottom of the lamp.
Date published: 2018-08-24
Rated 4 out of
5
by
NCKelly from
Drilling holes in a deck and for cable railing
[This review was collected as part of a promotion.] We used this bit to drill through 6x6 posts for cable railing. It worked really well in all situations, great results. By the end of the project the neck of the bit was slightly warped. Likely because we were pushing too hard.
Date published: 2018-08-23
Rated 5 out of
5
by
BAW8840 from
Extra long wood bit
[This review was collected as part of a promotion.] Exactly what was needed to complete the project we had. Easy to install and use. Was able to drill through the bolted together joists easily. Comes in a handy plastic box usable later for storing the bit.
Date published: 2019-03-02
Rated 5 out of
5
by
Howard from
Running phone wire
[This review was collected as part of a promotion.] Great to bore through wall and pull phone wire back through the hole you drilled. Small whole in woodbore allows you to hook wire to it to pull it through wall with little to know trouble. Works great.
Date published: 2018-08-26
Rated 5 out of
5
by
TDFOK from
Worked Great!
[This review was collected as part of a promotion.] I used the bit to install an underground dog fence through the external wall of my house. The bit worked great and the line puller hole worked great.
Date published: 2018-10-22
Rated 4 out of
5
by
AL from
Quick bit
[This review was collected as part of a promotion.] No trouble with plywood and other similar density materials. Had to sharpen bit when I hit metal in order to get through.
Date published: 2018-10-16
Rated 5 out of
5
by
Randy from
Wiring job
[This review was collected as part of a promotion.] This bit was a replacement for an older one I had, and this one was all I could ask for.
Date published: 2020-02-01