
Description
These reversible slide shoes adjust to fit most models and brands of two stage snowthrowers to prevent scratches and rust. Set of 2.
Product specifications
Component
Polymer
Color
Black
Packaging
2-pack
Model
Universal
Style
Prevents scratches and rust
Type
Slide shoes
You may also like
Will this fit my 18" Snow Joe Hybrid snow blower? We have a gravel driveway and are looking for a solution to raise it up a bit off the ground. Any suggestions for us?
Thank you for your question. These slide shoes are designed for two-stage gasoline powered snow throwers and will not be suitable for your single-stage model.
Date published: 2019-01-29
Will these fit a Yardworks 31AM33BE515 snowblower?
Thank you for your question. Yes this premium polymer slide shoe will fit your model snow thrower and includes the hardware required to mount it easily.
Date published: 2019-01-28
I want to put these plastic slides on my Canadiana that I bought from your store. I need 2 and 1/2 inches between center of the bolt holes. Will these slides fit my snowblower?
These MTD Snow Thrower Slide Shoe Kit are 3 3/8" wide and would allow the mounting bolts to be centered at exactly 2 1/2" from the bottom of the shoe which rests on the ground. When the shoes wear down they may easily be inverted and would allow you to continue using them with the continued clearance you need.
Date published: 2020-10-08
Slide Shoe Kit for Snowthrower - Polyethylene - 2PK is rated
out of
5 by
4.
Rated 5 out of
5
by
KBEQ from
Excellent Product!
I purchased a $2500 snowblower two years ago that I absolutely hated! The factory skid shoes didn't work and the blower kept digging into the ground and the handle bars would jab me in the gut, it was hard to manoeuver, etc. The only way to get it to handle better was to lower the skid shoes completely, which then left several inches of snow after blowing. I was looking to sell this snowblower, then I thought of simply changing the skid shoes. What a difference. I bought this kit and I now love my blower. They were really easy to install and made all the difference. I set them 1/2" below the blower and the scrapes the driveway clean, handles perfectly and is actually fun to operate. Super happy with this product. Definitely worth the $29.99 plus tax.
Date published: 2017-12-29
Rated 5 out of
5
by
Very Interested from
Works Just Like It Promised
Have on older MTD Blower 15+ years old, and was concerned these may not fit. The bolts provided worked perfectly and the extra shoe length was just what the doctor ordered.
Date published: 2017-11-25
Rated 5 out of
5
by
Sabio from
Must Have Item.
Not sure these are not standard equipment on all snowblowers.
It prevents damage to your driveway or any surface underneath.
It also makes it noticeably easier to maneuver.
I installed these on a Craftsman 1530 MDS.
Preset holes did work but these are quite long.
I had to trim appropriately 2" off the end to prevent interference with a bolt. Minimal effort, about 30 seconds each with basic saw.
They still cover the entire side.
Date published: 2021-01-12
Rated 4 out of
5
by
Smiply_Me from
These Slide Shoes fit my Snow Thrower
However, they are not of the same high quality as those that came with the machine. They are also much cheaper than the ones which came with the Snow Thrower.
Date published: 2018-03-06