
Description
The Skylink Remote Control Garage Door Opener with Visor Clip works with most national brand garage door openers. Designed for convenient access to your garage door, the door opener easily attaches to your car's sun visor and also fits most new car remote housing compartments. The remote control door opener has a range of 100 feet.
Product specifications
Component
Plastic
Color
White
Warranty
1-Year Warranty
Included
12 Volt Battery
Style
Remote Control with Visor Clip
Type
Garage Door Opener
You may also like
why does the remote open quickly at times, sometimes takes about 5 minutes or longer and sometimes not at all. according to the building mgt there all new.
This is something I would address with out tech support team. Please call our technical support team at 1-800-304-1187 between 9:00 AM and 5:00 PM EST Monday to Friday or send an email at support@skylinkhome.com
Date published: 2020-12-03
Will this unit replace a skylink model 38 transmitter?
The 38 was replaced by 39P but yes, the G5V should work.
Date published: 2020-12-03
Is it work with wayne Dalton model 3214 ?
As a rule of thumb we don't match Wayne Dalton gdo's because they tend to use in between frequencies. I recommend the MK-1 instead. The MK-1 will work regardless of the frequency being used.
Date published: 2020-12-03
Does it work with chamberlain 41A5021-5e?
This will work you Chamberlain gdo as long as your Chamberlain made from early 90's to 2011. Up to the purple learn button. If your Chamberlain has Security + 2.0 or MYQ, it will not work.
Date published: 2020-12-03
Will this work with Raynor Pilot brand? Unsure of the year of make of my module.
Yes. It should work. We never had issues linking our remote controls with Raynor gdo's in the past.
Date published: 2018-10-15
Will this remote work with a Lynx 455 Automatic Doorman?
Yes. Attached to my opener is a receiver called a Linear Digital Control Delta 3. I had to go through all the combinations and the one that worked was Stanley in chart 2.
Date published: 2018-06-25
Will this remote work with a pre 1990 Liftmaster model 655 opener ?
Yes, this remote is compatible with Liftmaster openers up until 2012.
Date published: 2018-06-01
Will this work with a Craftsman 1/2 HP 41A4315-7D made for Canada 06/97
Yes this should work well with it.
Date published: 2018-04-19
Remote Control Garage Door Opener with Visor Clip is rated
out of
5 by
6.
Rated 1 out of
5
by
Cottonpicking Mad from
Piece of absolute, pathetic garbage!
I bought this abomination almost an year ago. It started giving me delayed response about 2-3 months ago. Last week, it completely stopped! So, I bought another identical one a few days ago. Tried every combination of slider switch/DIP switch settings. Does not work with my 2000 model Liftmaster. Of course, I did not make a mistake as I had programmed the previous one successfully. To add insult to injury, their customer service hours suck. I mean the rest of us work for a living! By the time we get home, they are closed - and one has to be at home to be able to troubleshoot this - and they are not open on weekends!!! I emailed them and they sent me a form letter asking me to ship it to them at my expense! Naturally, I am returning this to the point of sale and let Skylink eat it! I will never by Skylink again.
Date published: 2018-02-10
Rated 4 out of
5
by
Jaytay55 from
Works but was the wrong model
I got this for my Skylink EQ1 but couldn’t figure out how to get it to work. The instructions seemed complex and the images were very small and hard to see. I finally gave up and emailed Skylink only to find out that this remote isn’t designed to work with the EQ1. Skylink support contacted me quickly and gave me exact instructions for a work around. I had the thing working in 5 minutes. Great support!
Date published: 2020-09-26
Rated 5 out of
5
by
JTGuy from
Excellent alternative to old Stanley Garage remote
I have old Stanley garage door remote that used jumpers to set up the frequency. This remote works perfectly and 100% compatible with my old one. Installation took me sometime to understand but the setting it comes with did not need any changes for the brand. So all I had to do out of box was to match the frequency jumper settings. Visor clip works good to hold it in place as well.
Date published: 2017-11-11
Rated 3 out of
5
by
Pm221 from
Works OK with old Stanley 1/4 HP
Guessing I bought one ten years ago for Stanley opener. Set up easy enough, frequency switch at “D” (310 Hz) seemed a bit off but did the job. On/off switch now died, but will likely get another the same on basis of “ the devil you know.....”
Date published: 2019-07-27
Rated 5 out of
5
by
Ferrydriver from
A 1
Purchased this remote for my Blue Max (Genie?) 12 pin garage door and after configuring it as per the instructions, it worked well with a good range.
Date published: 2020-08-21
Rated 5 out of
5
by
JohnFromToronti from
Works
Took 3 minutes to sync with my older, but functional garage door.
Date published: 2019-06-24