
Description
Ultra-gloss epoxy. One pour is as thick as 60 coats of varnish. Crystal clear. Resists heat and chemicals.
- Ideal Uses: Finishing bar tops, table tops, plaques, ceramics, coins, currency, baseball cards, coloured sand, murals, flowers, fabrics, rocks, seashells
- Pour-on finish; plastic spreader or squeegee, disposable brush
- Dry to touch in 8 hours at 21 degrees celsius and fully cured in 72 hours
- As thick as 60 coats of traditional polyurethane
Product specifications
Use Location
Interior
Unit Of Measure Quantity
32
Warranty
Limited lifetime
Base Material
Water-based
Clean-up Method
Mineral spirits
Color/finish Family
Clear
Manufacturer Color/finish
Clear
Model Description
BAR AND TABLE FINISH KIT - CLEAR
Paint Color Family
Clear
Stain and Sealer in One
No
Tintable
No
Unit Of Measure
Fluid ounce(s)
You may also like
does this protect against UV rays? I need to cover a patio table that will be out in Canadian elements all year long
This product doesn't have any UV inhibitors and will not protect
Date published: 2020-08-07
How thick can I pour this product? I am making a table top with rocks in it.
Hi Dawnf,
It is recommended that our Varathane Bar & Table Finish be applied in 1.6 mm (1/16'') thick applications, roughly the thickness of a penny. Allow the sealer to cure for at least 4-5 hours in a dust free area before additional layers are applied.
Date published: 2020-07-31
How many square feet does it cover?
946 mL covers 0.6 sq.m. (6.4 sq.ft.)
3.78 L covers 2.38 sq.m. (25.6 sq.ft.)
Date published: 2020-05-09
Is this product food grade?
Hi Damlee,
Thank you for your question.
Once Bar & table fully cures, it is food grade safe. Product is fully cured in 72 hours.
We hope this answers your question. Feel free to contact us again if you require further information.
Date published: 2019-05-29
Is there a recommended way to diffuse the finish so that it has a more matte appearance, say with a acrylic spray after it has set?
I would recommend that you sand it with a fine grit paper and it will make it more matte.
Date published: 2019-05-03
I want to pour a slab table that has holes in it, about 4" wide, 6-7" long and 2" thick. Can I pour it in one pour or do I need to do the holes a bit at a time to build it up to the surface of the slab then do a final pour over the whole slab? Ta, Oscar
I suggest that you do the holes a 1/4 " at a time to the level of the table before applying the epoxy everywhere
Date published: 2019-05-05
Is this product durable enough to use on a gaming table with high volume usage? i.e. a shuffle board table.
This product will get scratched. We would recommend to use the Varathane Diamond Wood finish interior.
Date published: 2019-04-26
is this isophthalmic or orthophthalmic epoxy
The Varathane Bar and Table finish is an Amine Epoxy.
Date published: 2019-03-05
Finish - Bar and Table Top Finish is rated
out of
5 by
4.
Rated 5 out of
5
by
Rs91 from
Great stuff!! (Follow instructions!)
This stuff is really nice when completely cured. Follow the instructions!!! Coverage is pretty accurate
Date published: 2019-03-22
Rated 1 out of
5
by
Ludo98 from
Never dried
Bonjour, j’ai acheté ce produit, suivi les instructions mais malheureusement le produit n’a jamais séché. J’ai donc du tout retirer. En espérant que cela fonctionne mieux de votre côté.
Date published: 2020-12-07
Rated 5 out of
5
by
Richard73 from
Easy to work with.
I am happy I found this product on sale. It is so easy to use. Just follow the instructions and you’ll end up with a great finish.
Date published: 2023-01-24
Rated 5 out of
5
by
Maëlle Brico from
Great :)
Super product, Nice result!
Recommand It!.........
Date published: 2021-01-22