
Description
Valspar(R) wet look high gloss sealer waterproofs and enhances the color and design of aggregate, masonry, brick, slate and pavers with a glossy, wet-look sheen. As durable as it is beautiful, it protects against the sun's powerful rays, damaging weather, water, gasoline and deicing salts.
- Impart a rich, glossy finish
- Clear, waterproofing sealer for driveways, sidewalks, pavers and patios
- Protects from sun, water and household chemical damage
Product specifications
Package Quantity
1
Actual Net Contents(foz)
128
Minimum Coverage Area(ft2)
200.0
Flash Point(deg)
201.0
Actual Net Contents(ml)
3785.408
Maximum Coverage Area(ft2)
400.0
Maximum Working Temperature (Fahrenheit)
90.0 Fahrenheit
Use Location
Interior/Exterior
For Use With Decking
No
For Use With Fencing
No
For Use With Furniture & Cabinets
No
For Use with Siding
No
Uv Protection
Yes
Tint Base
N/A
Model Description
Valspar Protective Sealer 3.78L Wet Look
Algae Resistant
No
Application Method
Brush/Roll/Paint pad/Spray
Base Material
Water-based
Clean-up Method
Soap and water
Color/finish Family
Clear
Combustible
No
Container Size
1-gallon
Dry To Touch
1-2 hours
Dry To Walk
24 hours
Exterior Stain Type
Clear
Flammable
No
For Use on Composite Decking
No
For Use On Concrete
Yes
For Use On Wood
No
Furniture Ready
24 hours
Low Voc
Yes
Manufacturer Color/finish
Transparent Wet Look
Maximum Coverage Area(m2)
37.16
Maximum Working Temperature (Celsius)
32.22222222 Celsius
Mildew Resistant
No
Minimum Coverage Area(m2)
18.58
Minimum Working Temperature (Celsius)
10.0 Celsius
Minimum Working Temperature (Fahrenheit)
50.0 Fahrenheit
Mold Resistant
No
Paint Color Family
Clear
Pre-tinted
No
Recommended Surfaces
Horizontal
Stain and Sealer in One
No
Stain Color
Clear
Sub-brand
N/A
Tintable
No
Unit Of Measure
Fluid ounce(s)
Unit Of Measure Quantity
128.0
Warranty
Limited
Waterproof
Yes
You may also like
Will this work on a garage floor ?
Thanks for taking the time to ask a question. No, we don't recommend Wet Look Gloss Sealer on a garage floor. Respectfully, Reggie
Date published: 2022-05-02
I have a small flagstone entrance floor on the interior side of a garage entry door. I read that it is for exterior use, but can I use this product on this entryway?
Thank you for your question, we apologize for the delayed response. We would not recommend this product for an interior application. Regards, Linda @ Valspar Customer Support
Date published: 2021-11-12
I'm in a new home - occupancy for 365 days and want to use my basement. I do not want a painted floor, but looking for the Sealer wet-look and wondered what product I could use on an 'unfinished' basement floor to reduce dust and provide a finish?
Thanks for your question and my apologies for a delayed response.
I am sorry, but Wet Look would not work to reduce dust and it should soak into the porous concrete. Avoid using this product on nonporous, sealed
surfaces. To test, place a few drops of water on
the surface. If water sinks in, the surface is porous
enough to use this finish. If water remains on the
surface, do not use.
Respectfully, Reggie
Date published: 2021-10-21
Can I use this product safe to use on resurfaced cement countertops and if so does it require a sealer first?
Thank you for your question. This product cannot be used on countertops.
Date published: 2021-05-22
can this product be used indoors, we've used it outside with excellent results and would like to use this on our slate foor
The Wet Look High Gloss Sealer is for exterior applications only.
Date published: 2020-09-28
Valspar Signature Clear Concrete Sealer (Actual Net Content : 128 oz) is rated
out of
5 by
3.
Rated 4 out of
5
by
m4mm4l from
Looks good..
I bought it a month or so ago and it works great. easy to apply, is white then goes clear. I used it on a large exposed aggregate driveway.
Needed more than the bottle said.
Date published: 2016-10-19