Product selection from
MINWAX
Polycrylic Water-Based Protective Finish - 946 mL - Satin
Article #14495011
Model #321034444
Format 946ML
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
Hassle-Free Returns
90 days to return or exchange in original condition and packaging.
Read Return Policy
Warranty
None
Description
Add a clear glossy topcoat to your interior wood surfaces with Minwax Polycrylic protective finish. It's ideal for the final finish on light woods such as maple, ash and birch. The product is easy to apply with a synthetic brush and it dries in 24 hours. With its low-odour, water-based formula, this topcoat finish is easy to clean up with soap and water. Minwax recommends two to three coats for durability, and you can recoat after just two hours.
- Protects and adds beauty to interior wood surfaces including woodwork, furniture, doors and cabinets
- Crystal clear finish is ideal for use over light woods like maple, ash and birch as well as over Minwax Water Based Wood Stains
- Dries quickly
- Cleans up easily with warm water
Product specifications
Coverage Area(ft3)
100
Dry to Touch
1-2 hours
Dry to Re-Coat
1-2 hours
Container Size
1-quart
Base Material
Water-based
Clean-up Method
Soap and water
Color/Finish Family
Clear
Paint Color Family
Clear
Sheen
Satin
Unit of Measure
Fluid ounce(s)
Use Location
Interior
Warranty
None
Package Quantity
4
Application Method
Brush/Wipe-on
Tint Base
N/A
For Use on Fiberglass
No
Gel
No
Pre-Tinted
No
Stain and Polyurethane in One
No
Stain and Sealer in One
No
Tintable
No
Transparency
Transparent
Dries Clear
Yes
For Use on Bare Wood
Yes
For Use on Hardwood
Yes
For Use on Hardwood Floors
Yes
For Use on Plywood
Yes
For Use on Softwood
Yes
For Use on Stripped Wood
Yes
Manufacturer Color/Finish
Clear
Country of Origin
US - UNITED STATES OF AMERICA
For Use on Veneer
Yes
Can I use on laminate counters?
Polycrylic Water-Based Protective Finish - 946 mL - Satin is rated
out of
5 by
254.
Rated 5 out of
5
by
Cactus Wren Collective from
The most beautiful top coat finish!
[This review was collected as part of a promotion.] I decided to try Minwax poly top coat in Satin on my refinished furniture & I’m obsessed! Not only does this product go on like a dream, the quick dry time and hardened satin finish is amazing!
Date published: 2024-06-19
Rated 5 out of
5
by
LeslieAnn from
Excellent product
[This review was collected as part of a promotion.] I used Polycrylic as a top coat on my painted kitchen cabinets. After 2 years it is still holding up well
Date published: 2024-06-18
Rated 1 out of
5
by
Cornchip from
Never again
I can't really speak for the actual finish, as the shoddy and cheap design of the aerosol can has ruined a good portion of a job I'm doing, and I get to waste a ton of time and money fixing it. I bought four new cans of polycrylic aerosol cans from a national hardware chain to seal wood cabinets. After a few test passes, I started applying it to the cabinets, and despite following the directions about initial shaking and intermittent shaking, the can started spitting out frothy blobs in the fine mist, and they stand out terribly on the wood. I can't, don't want to, and shouldn't have to, apply so much spray that it would cover these blob marks up, and I cant sand them out without ruining the stain on the wood. I start using the other brand new cans thinking one is defective, and they have the same problem, and one is so bad it's like spraying a can of shaving cream. Every single spray cap was sitting crooked in the valve, and when one popped off with no effort to do so, the plastic bottom of it looked mangled. Same with all of them. It's clear a batch of these went out defective, and if quality control doesn't care about a visually obvious problem, I can't trust the product formulation quality control either.
Date published: 2024-05-17
Rated 5 out of
5
by
Rick m from
Excellent product
[This review was collected as part of a promotion.] I use this on all my painted pieces, does not yellow the paint.
Date published: 2024-05-15
Rated 5 out of
5
by
RagstoRiches from
My Favorite Water Based Top Coat!
[This review was collected as part of a promotion.] I am a full time furniture flipper and this is my absolute hands down favorite top coat. I use this on almost EVERY piece I give new life to. Whether you spray, brush, or roll, this product goes on so smooth! Dries to crystal clear! Pick up a gallon today!!!!!
Date published: 2024-05-15
Rated 3 out of
5
by
John55 from
Flat finish sometimes. Gloss other times.
I used the Minwax polycronic finish on some maple flooring transition pieces I fabricated. Mainly concerned with getting a flat finish. Sometimes I get flat and sometime I get glossy. I don't think I'm doing anything different.
Date published: 2024-04-04
Rated 5 out of
5
by
Bman3 from
Awesome dyi
[This review was collected as part of a promotion.] My dad loves using it and I thought I’d try it works perfect brushed on and durable and cleans and drys fairly quickly.
Date published: 2024-04-03
Rated 5 out of
5
by
MA001 from
The wall
[This review was collected as part of a promotion.] It was easy to apply and wipe it on with glove , light sanding and repeated 3x then was done. Clean up was breeze. The wall keep its natural look.
Date published: 2024-04-01