Product selection from
ONWARD
Onward Anti-Sag Gate Kit - Steel- Zinc - 24-in
Article #35055815
Model #299XR
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
Hassle-Free Returns
90 days to return or exchange in original condition and packaging.
Read Return Policy
Warranty
1-year
Description
The Onward anti-sag gate kit helps you prevent or correct sagging gates. This gate kit includes brackets, cables and a turnbuckle. Simply support your gate to the correct height, and install this kit to achieve the perfect level. It has a sturdy construction for strength and durability.
- Zinc (2G) finish
- Kit includes : 1 top corner bracket with cable, 1 bottom corner bracket without cable, 1 hook-and-eye turnbuckle, 1 joiner bracket, and all required mounting screws
- Zinc-plated to resist rust
- Fits gates with up to 7-ft 6-in (1.90 m) diagonal bracing (approximately 5-ft x 6-ft [1.30 m x 1.80 m]) gate
- Made of steel
Product specifications
Width Measurement
1-1/2-in
For Use with Chain-Link Fencing
No
For Use with Composite Fencing
Yes
For Use With Electric Fencing
No
For Use with Metal Fencing
No
For Use with Vinyl Fencing
Yes
For Use with Wood Fencing
Yes
Hardware Finish
Zinc
Height(cm)
3.81
Height(in)
1.5
Height(mm)
38.1
Height Measurement
1-1/2-in
Length(cm)
60.96
Length(in)
24
Length(mm)
609.6
Length Measurement
24-in
Manufacturer Color/Finish
Zinc
Material
Steel
Package Quantity
1
Screws Included
Yes
Self-Closing
No
Series Name
N/A
Type
Gate Kit
Warranty
1-year
Weight(kg)
0.299376
Weight(lb)
0.66
Weight Capacity(kg)
0.0
Weight Capacity(lbs.)
0
Width(cm)
3.81
Width(in)
1.5
Width(mm)
38.1
Onward Anti-Sag Gate Kit - Steel- Zinc - 24-in is rated
out of
5 by
10.
Rated 1 out of
5
by
Helpfulbee from
No instructions, difficult to figure out.
Not happy with the choice. Got this item and we are disappointed. On the back of the package it came in there is enough space for them to draw some clear instructions. Just a terrible waste of time.
Date published: 2023-07-15
Rated 1 out of
5
by
Backbar from
Don’t buy this
I bought it for a sagging gate. It comes with no clamps I had some lying around, so not bad then your gates sagging and the screw holes are on the bottom of the gate.
Date published: 2023-06-05
Rated 3 out of
5
by
Doug the third from
Easy to install on new door
Bought this to prevent future saging on a 7 wide gate. Was easy to install although there are no screws or proper instructions. None the less, not too difficult to figure out.
Screws do attach from the outside corners so not a great option if you can't detach the gate to install.
That said I could have bought similar parts separately for under 10 bucks and would have probably been easier to install.
Date published: 2023-04-22
Rated 5 out of
5
by
Tazzz from
Would buy again
I put top plate outside of gate put bottom plate on the inside of gate. Used plate and weaved cable through. Was in stalled in couple min.
Date published: 2022-10-31
Rated 2 out of
5
by
Mike1600 from
Terrible parts
Unable to put lower screws on gate (underneath) while it was on post. Did not come with screws or instructions. Rectangular piece with 4 holes...sucks as a wire lock. Would not buy again.
Date published: 2022-10-09
Rated 3 out of
5
by
lil D from
ok
you basically have to take the gate off to put it on.. which in my mind is pretty stupid. I see that there are other similar ones that you attach at the side. Like they have a hole for a screw on the side and not JUST on the bottom. So just keep that in mind with this model.
Date published: 2022-08-05
Rated 1 out of
5
by
PeedOff from
Don't buy it!!
The kit has no screws, no cable clamps no instructions, fastens UNDER the gate where you cannot get the screws in. Garbage.
Date published: 2021-07-09
Rated 1 out of
5
by
Patrick270 from
Poor Poor Equipment
Bought this thing. No screws,no instructions. Not even worth the money
Date published: 2021-04-17