
Description
Latex-based concrete and masonry waterproofing paint. Resist up to 20lbs. of water pressure. Very smooth, bright white, non-gritty finish applies easily to drywalls with brush or roller. White. 3.78 l.
- Latex base mold and mildew proof waterproofing paint
- Guaranteed to stop water- resists up to 20 lbs. of water pressure
- Very smooth, bright white, non-gritty finish applies easily to dry walls with brush or roller
- Ultra low odour, easy soap and water clean-up
- Ideal for basements and other interior/exterior surfaces
- Backed by two guarantees: 15 year waterproof and 5 year mold and mildew-proof paint film
Product specifications
Algae Resistant
No
Base Material
Latex
Color/Finish Family
White
Concentrated
No
Container Size
1-gallon
Dries Clear
Yes
Dry to Re-Coat
4 hours
Dry to Touch
30-60 minutes
For Use on Concrete/Masonry
Yes
For Use on Outdoor Fabric
No
For Use on Wood
No
Low Odor
Yes
Low VOC
Yes
Manufacturer Color/Finish
White
Maximum Coverage Area(ft2)
300
Maximum Coverage Area(m2)
27.87
Maximum Working Temperature (Celsius)
-12.22222222 Celsius
Maximum Working Temperature (Fahrenheit)
10 Fahrenheit
Mildew Resistant
Yes
Minimum Coverage Area(ft2)
125
Minimum Coverage Area(m2)
11.6125
Minimum Working Temperature (Celsius)
-15.0 Celsius
Minimum Working Temperature (Fahrenheit)
5 Fahrenheit
Mold Resistant
Yes
Non-Toxic
No
Number of Coats Recommended
1
Recommended Surfaces
Horizontal/Vertical
Sheen
Super flat
Sub-Brand
Zinsser
Textured
Yes
Type
Waterproofer
Unit of Measure
Liter(s)
Unit of Measure Quantity
1
Use Location
Interior/Exterior
UV Protection
No
Warranty
None
Zero VOC
No
Package Quantity
1
Water Protection
Waterproof
Transparency
Solid
For Use on Docks
No
For Use with Decking
No
For Use with Fencing
No
For Use with Furniture & Cabinets
No
For Use on Pavers
Yes
For Use in Basements
Yes
For Use on Driveway
Yes
For Use with Siding
Yes
You may also like
Can you use this in a shower for waterproofing before you tile? Like red guard?
This product is meant for concrete only
Date published: 2020-11-30
Can this paint be tinted?
WaterTite LX can be tinted to off-white or deep pastel colors using 1.5 to 2.0 fluid ounces of universal colorant per gallon
Date published: 2019-08-14
I am building a raised planter, but the back wall of the planter will be the cinder block foundation of my concrete porch. Will this product waterproof sufficiently to make a barrier b/n the soil and water in the garden box and the blocks?
Yes, the Watertite will act as a barrier between moisture from the soil, and concrete. Allow the Watertite to cure 7 days before it is expected to be fully waterproof.
Date published: 2019-07-05
I will be waterproofing a concrete basement wall and then glueing foam slab insulation to the wall with PL300 adhesive. Should I use the Watertite or Watertite LX product? Is there any risk that either product that it will not accept the adhesive?
Hi JWBZN,
Thank you for your question.
Either Watertite product should be fine with your adhesive. We recommend testing the paint on a stir stick first. Allow for full cure, which is 7-14 days, depending on temperature and humidity. Once cured, apply your PL300 adhesive to the stick and see if it dries and sticks. If your test is successfully then you should feel confident that the adhesive will stick to the painted concrete.
We hope this answers your question. Feel free to contact us again if you require further information.
Date published: 2019-05-28
Can I paint it over existing latex based paint?
Watertite works best on bare concrete. It fills the pores of the concrete to create a firm barrier again water. If the surface is already painted, the existing paint should be removed before it is coated with WaterTite for best results.
Date published: 2019-05-22
What colour is it?
the color is white
Date published: 2019-05-14
Can this be tinted to a dark blue/gray colour
this paint cannot be tinted to a dark color
Date published: 2019-03-12
Can I use this on cement shower floor?
"Forms an impermeable barrier to water on interior or exterior, vertical or horizontal, concrete block, cast-in-place concrete, and cementitious stucco"
Date published: 2019-02-27
Mold/ Mildew Proof/ Waterproofing Paint - Zinsser - Latex - 3.7 L - White is rated
out of
5 by
2.
Rated 1 out of
5
by
runner87 from
Not to be walked on.
This says it's great for basements including floors. So I used it to hide some stains and followed the instructions for etching the concrete etc. 9 months later it's begun to peel up badly. I called the company and their response was simply, "you're not allowed to walk on the paint." Then why suggest it for a floor? Now I'm looking at stripping my entire floor to repaint it with Kilz oil based paint.
Date published: 2019-09-23
Rated 5 out of
5
by
Paul79 from
Great Sealer
I just bough this to coat my cinder block basement and I think it works exceptionally well. I had a few damp areas and it’s taken care of that, also with come concrete patches.
Date published: 2020-11-01