
Description
Take on various building and construction projects with these mitre saw blades. Made with carbide, these saw blades are highly durable and sturdy. The clear coating of these carbide saw blades reduces the build-up of heat, which prevents gumming and rust. These saw blades are compatible with handheld saws. Get these steel saw blades which measure 10-in dia and come in packs of three.
- ATB provides the cleanest crosscut in hard and soft wood or plywood
- Thin kerf with wedge shoulder design for faster cuts
- Clear anti-stick coating to reduce friction and heat build-up
- Ultra-sharp construction-grade tungsten carbide teeth
- Precision balance for accurate cut
Product specifications
Compatible with Benchtop/Stationary Saws
Yes
Compatible with Handheld Circular Saws
Yes
Compatible with Tile and Cut-Off Saws
Yes
Dado
No
Package Quantity
3
Sub-Brand
N/A
Frequently bought together
You may also like
Metabo HPT Set of Mitre Saw Blades - Carbide - Assorted - 10-in dia is rated
out of
5 by
9.
Rated 2 out of
5
by
Anteo from
Poor performance
I only tried using the 80T blade in my table saw. The blade had a significant wobble, clearly warped. The cut was all over the place, very crooked because of the warp. Teeth didn't seem very sharp. After a few boards through the saw, I took the blade out and back to Lowe's for a refund. I didn't bother trying the other two in the pack.
Date published: 2016-10-22
Rated 1 out of
5
by
VLG1917 from
Excellent Throw Away pack
Great for chopping work pieces, softwood jigs, and firewood. Not recommended for anything else. Don't use the 80 tooth in any decent precision saw equipment as it will quickly turn it into a lumberjack junk.
Date published: 2021-09-10
Rated 1 out of
5
by
Flooring installer from
Dull since the first cut
I bought two packs of these, and I tried 4 of them and all of the blades were struggling to cut wood. I just throw them out. My experience was awful.
Date published: 2021-07-30
Rated 1 out of
5
by
Jim435 from
Poor Quality, Metabo Should Be Ashamed
Short version: Poor quality, bad cuts straight away. Don't bother. Long version: I needed an 80 tooth blade for a project and this set was on sale for $30! Cheaper than a single blade of the cheapest variety. I know Metabo is a good brand so I thought I'd give them a try. Even if they don't stay sharp in the construction world that will be years and years for me. I was curious by a review that said the blade had a visible wobble. This didn't have visible wobble, but I pulled out my dial indicator and measured it compared to my stock 40 tooth craftsman blade. .010" run-out (wobble) compared to .003" for my stock blade. Over 3 times worse, not a good start. And when I started my saw it had a vibration it never had before. I used it to do a cut on a 3/4“ sheet of maple veneer plywood. Cut wasn't good, worse tear-out than my 12 year old 40 tooth blade. These will be going back.
Date published: 2023-03-23
Rated 1 out of
5
by
rbob5515 from
Maybe make a two pack? to be better quality?
I used the 60 tooth on my table saw cutting 5/8 particle board. Thought it was a wild crazed beaver throwing wood chips at me! What a rough cut! Not worth the money at all! Still haven't tried the others yet but I threw the first one away after 2 cuts!
Date published: 2022-02-04
Rated 1 out of
5
by
Xane13 from
Bought two packs as metabo is a reliable brand. But the blade quality and finish is no where near par when compared with a similar DEWALT or Diablo blade. I’ve gotten half the cuts on the 80T I normally get on one of the other blades.
Date published: 2021-03-03
Rated 5 out of
5
by
Dollard from
Bonne achat
J'ai acheter l ensemble en liquidation pour $ 30.00 a ce prix là une aubaine
Pas encore utilisé
Date published: 2023-05-20
Rated 5 out of
5
by
Jermiester7 from
Awesome online experience
Fast, convenient and the price was incredible will buy again
Date published: 2018-11-14