Product selection from METABO HPT

Metabo HPT Pneumatic Pin Nailer - 1 3/8-in - 23-Gauge

Add to wish list

Metabo HPT Pneumatic Pin Nailer - 1 3/8-in - 23-Gauge

Article #37815212 Model #NP35AM Format 5/8-1 3/8"xGA23

This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.

Add to wish list

Description

The new Metabo Pneumatic micro pin nailer fires 23-gauge headless pins which produce near-invisible holes. The magazine automatically adjusts to 5/8", 3/4", 1", 1 3/16" and 1 3/8" (fastener lengths) for use on a wide variety of projects. The large housing shield, no mar tips and rear exhaust protect delicate work surfaces from costly damage. Features such as a visual reload indicator, adjustable depth of drive and large-capacity magazine reduce downtime and offer convenience to the user. Lightweight and compact it may be used in a variety of applications including cabinets, panelling, small moulding, trim, and more. Sold with (2) no mar-tips (1)carrying case (1) pair of safety glasses and (1) hex. bar wrench. Backed by a 5-year warranty.

FASTENERS: 23-gauge headless pins with automatic adjustment for 5/8 In., 3/4 In., 1 In., 1-3/16 In. and 1-3/8 In. fastener lengths
APPLICATIONS: Great for cabinets, paneling, small moldings and trim, glazing bead, craft work, and picture frame assembly
DEPTH ADJUSTMENT: Depth adjustment for flush drives into a variety of surfaces
LIGHTWEIGHT: Only 2.0 lbs, for easy all day use
TRIGGER: Dual trigger for safe and accurate placement of fasteners
REAR EXHAUST: Directs oil and debris away from the work surface
NO-MAR TIP: No-mar tip on the nose protects the work piece from unintended markings
MAGAZINE: Large fastener capacity for fewer reloads and less downtime
AWARDS: Rated the Pro Preferred Nailer for 6 years running (2014 - 2019) by Builder and Developer Magazine

Product specifications

ANSI Compliant

Yes

App Compatibility

Base Warranty Labor(Months)

Base Warranty Parts(Months)

Battery Included

No (bare tool)

Battery Recharge Time(hrs)

Battery Size

N/A

Battery Voltage

N/A

Battery Warranty Labor(Months)

Battery Warranty Parts(Months)

Bluetooth Compatibility

Case Type

Hard

Charger Included

Collation Material

Strip

Collation Type

Straight

Cordless

Degree

N/A

Depth Control

Requires tools

Fastener Head Style

Headless

Housing Material

Aluminum

Inlet Size in Inches

3/8-in

Jam Clearing

Requires tools

Magazine Capacity

100

Maximum Nail Diameter

0.083-in

Maximum Nail Length(cm)

3.4925

Maximum Nail Length(in)

1.375

Maximum Nail Length(mm)

34.925

Maximum PSI

100.0

Minimum Nail Length(cm)

1.5875

Minimum Nail Length(in)

0.625

Minimum Nail Length(mm)

15.875

Motor Warranty Labor(Months)

Motor Warranty Parts(Months)

Nail Gauge

Pneumatic

Yes

Power Source

Pneumatic

Required Pressure (PSI)

65 PSI

Series Name

N/A

Strip or Coil

Strip

Sub-Brand

N/A

Type

Warranty

5-year

Weight(kg)

2.13192

Weight(lbs.)

4.7

Wi-Fi Compatibility

Works with Android

Works with iOS

Can you purchase extra no mar tips for this

Asked by: Dan99999999

Hi there. Yes you can special order extra no mar tips. Use part #884681. Hope this helps.

Answered by: Metabo HPT

Date published: 2021-07-30

Is this pinner oilless or oiled

Asked by: Westwindman

Metabo HPT Pneumatic Pin Nailer - 1 3/8-in - 23-Gauge is rated 4.7 out of 5 by 235.

Rated 5 out of 5 by JayCee from Great deal for the price I always used brad guns for my crown but hated the nail holes it left, so I purchased a really cheap pin gun that lasted about 10 minutes as it misfired and had the pins bending all over the place. I started a large kitchen and knew I needed a decent pinner for it to look good, as I also had to fill every hole I made. The kitchen had 8' cabinet height but 9' ceilings that were to be filled in with 5 piece crown and this pinner made it work. They were very strong holding and never misfired once, they also set at a decent depth fastening maple to maple pieces. The double trigger takes a while to get used to, but the bonus is no nosepiece to block your view like the brad gun. It needs a belt hook that the brad gun has though.

Date published: 2015-09-02

Rated 5 out of 5 by 413carpenter from Works great in production setting for cabinetry [This review was collected as part of a promotion.] I use this gun two to three days a week on average, and it performs well. The higher end cabinets with maple and oak trim will require the air pressure to be turned up to about 115psi to set consistently countersunk pins. With lower end ply and pine cabinetry 90 lbs. I assemble flat pack cans with pins and glue up with no problems, for the most budget friendly kitchens I offer, I simply set up my shop of tables benches saws and a tent outside and build the cabs, go inside and install while the pins hold until the glue sets so I get one day kitchens complete in the 1 day promised.

Date published: 2018-10-28

Rated 1 out of 5 by LP from Will NOT Adjust Nail Depth Don't bother with this piece of junk. Following depth adjustment instructions and increasing/decreasing air pressure, the depth is exactly the same which is inadequate. Nails are crowning well above work surface and no adjustment will alter the depth. The depth range is extremely small to begin with but since it makes no difference it doesn't matter anyway. Also, the company does not provide a customer service number to call with questions. The C-shaped brackets around the two allen screws are the limits to the depth adjustment, which is nearly zero range. There is not position that changes the depth of the drive. Wasted many pins trying to test for depth.

Date published: 2020-04-12

Rated 5 out of 5 by Ray from Hitachi 23 Gauge Pin Nailer [This review was collected as part of a promotion.] In about 4 months I have acquired a Framing Gun, 16 gauge Finish Gun, 18 Gauge Brad Gun and now the 23 gauge Pin Gun. The 23 gauge is rapidly becoming my favorite of all. It limits clamping, and assists in holding in place while glue dries. And all the above without leaving more than a small pin head size mark which often does not even require filling. When I discovered Air Nailers, I had to have one of each. Thanks Lowe's Hardware.

Date published: 2018-10-08

Rated 5 out of 5 by Handyman from Good Product Works as expected,case is ok and nice that the tool comes with protective tip and a spare tip. Oil bottle and on board allen wrench are useful. Well thought out accessories .

Date published: 2016-04-25

Rated 5 out of 5 by Bob from Hitachi 23 gauge Pin Nailer Works great just like advertised. However, the manufacturer specs say it will handle 5/8" up to 1-3/8" nails. I tried 1/2" nails and they worked just fine. Not sure why they specify minimum of 5/8".

Date published: 2017-07-25

Rated 5 out of 5 by Sirsudsy430 from Pro quality Bought this and used it on a couple of projects before I wrote a review. In short: this nailer is superb. I built a doll house shelf for my daughter out of 1/4" poplar and the pins held the boards together well until the glue dried. Also used it to do a minor repair on the trim to my kitchen cabinets. Nails were driven flush, if not a bit countersunk with no need to fill because they're so small. A great tool for the pro to hobbyist like me. Good ergonomics and case as well. Only complaint is lack of a belt hook or hanger to hold gun while in use.

Date published: 2020-11-20

Rated 5 out of 5 by Spanky from Great Addition I have been woodworking for couple of years now and needed a pin nailer for adding trim work. As I already own other Hitachi products that I am very pleased with this was an easy choice. Works as advertised and virtually leaves no holes to fill.

Date published: 2013-07-07