
Description
If you're looking to make your pressure washer last longer, check out this all-in-one Pump Guard pressure washer protector by Karcher. A great way to protect your pressure washer from premature wear, corrosion and freezing. Pump Guard also lubricates valves and seals to prevent them from getting stuck down the line. Ordinary antifreeze just doesn't do the trick. Who ever said you can't buy peace of mind? You'll be patting yourself on the back for years to come for getting your hands on this wise product.
- Works with all Karcher electric and gas powered pressure washers
- Ordinary anti-freeze is insufficient in this respect and is not recommended
- Also adds lubrication to your pressure washers valves and seals to prevent sticking in the future
- Karcher's pump guard is specifically formulated to prolong the life of your pressure washer
- Custom solution will protect your pressure washer from corrosion, premature wear and freezing down to -25º F
Product specifications
Package Quantity
1
Quantity(g)
453.592
Quantity(oz.)
16
You may also like
Karcher Pump Guard Pressure Washer Protector - Environmentally Responsible - 16-oz. is rated
out of
5 by
3.
Rated 4 out of
5
by
RLT from
Works
I used it for two years, and it protected from freezing and damaging my pump. You must disconnect the pressure side hose, connect the product to the garden hose side, squeeze the bottle while pulling the starter cord (with the start switch turned to off). I found it worked best if you also tipped the pressure washer up so the pump saver bottle was facing down. Watch for the fluid to come out the pressure side and you are protected. A little awkward to use, but not terrible. I didn't find the aerosol B & S product until this year, and yes that is much easier to use, bot more expensive for less product. Either one does the job.
Date published: 2016-10-27
Rated 1 out of
5
by
rusty from
Would not perform as advertised
This product is not an aerosol.. The purchaser is expected to squeeze the bottle while pulling the starter cord to draw the oil into the pump. I could not get any product into the pump. No amount of squeezing would inject the pump. Product returned for credit.
Date published: 2014-11-10
Rated 5 out of
5
by
Iz from
Works 4 me
I use this in my little 1600 psi ryobi pressure washer and live in an area with very hard water. Have had no problems at all for about 6 months. it's an electric motor so I just plug start and squeeze bottle through pump. Works...
Date published: 2021-02-28