Product selection from INSULFLOOR

Insulfloor ThermoShield R-42 Attic Hatch - Polystyrene/Wood - Natural Wood Finish - 10 1/2-in H x 22-in W x 30-in L

Add to wish list

Insulfloor ThermoShield R-42 Attic Hatch - Polystyrene/Wood - Natural Wood Finish - 10 1/2-in H x 22-in W x 30-in L

Article #87985000 Model #TG0012 Format 22"x30"x10"

This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.

Add to wish list

Description

The ThermoShield R-42 attic hatch consists of a box made of chipboard 5/8'' thick and a finishing edge MDF with weather stripping foam. The door is made of 1/2'' chipboard laminated on 11'' thick expanded polystyrene. R-42 insulation complies with current requirements. Stable polystyrene insulation doesn't absorb water, while regulatory dimensions make it easy to install the attic hatches between trusses. This product meets the new energy efficiency standards of the RBQ building code.

Additional Content & Guides

Installation Manual

Data Sheet

Product specifications

Weight(lbs.)

Swing Clearance (ft)

N/A

Stainable

Yes

Series Name

Thermo Shield

Rung/step Depth (in)

N/A

Color/finish Family

Natural wood

Hand Rail

Locking Device

N/A

Material

Wood

OSHA Compliant

Yes

Paintable

Yes

Rough Opening Length (in)

Rough Opening Width (in)

Frequently bought together

LEPAGE

"Quad Max" Sealant - White - 280 mL

Format 280ML

★★★★★ ★★★★★

3.5

(4)

Details

Article #01805201

DAP

Dap Silicone Plus Rubber Window and Door Sealant - Clear - For Indoor and Outdoor Use - 319-ml

Format 300ML

★★★★★ ★★★★★

4.8

(21)

Details

Article #0491049

Rated 1 out of 5 by ManuEng from absolute garbage Installed for about a month and the chip board had swollen so much it wouldn't slide back down. I shaved the edges so it would slide back down. 6 months later and I go back into the attic and it won't slide down again. I'm going to have to replace it this summer because I'm surely getting a terrible seal now. Just a terrible design. I wish there were reviews when I bought it. Don't make my mistake, DO NOT BUY!

Date published: 2021-03-02

Rated 1 out of 5 by Utilisateur from fait de materiaux mdf mdf gonfle si y a un peu d'humidité vraiment cheap

Date published: 2020-04-11

Rated 1 out of 5 by LaMayo from Ne pas acheté! Ne surtout pas achetée! Comme l'autre commentaire plus bas, le contour est fait de Mdf, impossible a ouvrir si il y a le moindrement d'humidité. J'ai réussi a l'ouvrir avec un 2x4 et un jack d'auto 2 tonne juste pour vous donner un idée si non c'étais impossible. 100$ direct dans les poubelle!!

Date published: 2021-06-20

Rated 1 out of 5 by Paul10 from Mauvaise conception Fait avec de l'aggloméré, si il y a moindrement de l'humidité dans le grenier le matériel gonfle et le panneau devient très dur a ouvrir. Devrait être fait avec du veneer de bonne qualité

Date published: 2020-05-10