The General® squared head protractor is used for setting bevels, measuring and transferring angles. 6-in adjustable protractor arm locks into the desired position with knurled thumb nut. Permanently etched graduations from 0 to 180 degrees and from 180 to 0 degrees will not wear or rub off. Made of ground stainless steel for precision and durability. Head measures: 3 3/8-in x 2-in.
- 6 inch adjustable protractor arm locks into desired position with knurled thumb nut
- Made of ground stainless steel for optimum accuracy
- Permanently etched graduations from 0 to 180° in opposite directions
- 3-3/8 inch x 2 inch head
Ground Stainless Steel
Square Head Steel Protractor
You may also like
GENERALGeneral Digital Moisture Detector - Plastic
ROKRok Magnetic Sweeper with Adjustable Handle - 50-lb Load Capacity - 24-in W
Format 24x30-44 1/2"Details
JOHNSON"Acculine Tru-Line" 98'' extruded aluminum cutting guide
GENERALDigital Sliding T-Bevel
KOBALTKobalt 2-Pack 25-ft Magnetic Compact Tape Measure
Format 25'x1" 2/PKDetails
Paulin 2-in-1 Magnet - Neodymium - Extendable
Paulin Disc Magnets - Ceramic - 3/8-in x 3/4-in - 8-Pack
KOBALTKobalt 299-Piece Mechanic's Tool Set with Case - Metric and SAE
GENERALGeneral Tools Vernier Caliper - Steel - 5-in
Paulin Magnetic Strip - Grey - Adhesive Backing - 120-in x 1/2-in
JOHNSONDigital Angle Locator
Paulin Heavy-Duty Lifting Magnet with Eyebolt - Red - 150-lb Load CapacityDetails
Paulin Disc Magnets - Ceramic - 1/2-in x 3/16-in - 10-Pack
GENERALGeneral Precision Magnetizer/Demagnetizer - Alnico Magnet - Step Down Design - 2-in L x 2-in W
GENERAL2 1/4-IN INSPECTION MIRROR
Paulin Block Magnets - Ceramic - 1 7/8-in x 7/8-in x 3/8-in - 2-Pack
Format 3/8x7/8x1 7/8"xPK2Details
GENERALTelescoping LED Lighted Inspection Mirror
Format 360DG 12 1/4-33"Details
GENERALGeneral Tools Angle-Izer Digital Protractor - 180° - 6-in - Stainless Steel
GENERALPick-Up Tool with Del Light, 24"
KOBALTKOBALT Caliper Electronic 6-in Blue
Can you measure an inside corner?
General Square Head Protractor - Metal is rated out of 5 by 40.
Rated 5 out of 5 by spryguy from Best buy I could find A great tool and can save you a lot of trouble when doing baseboards or any corners that are out square if you know how to use it. There is a lady on y tube called seejanedrill who can show you how to use it. Search 'math trick seejanedrill' This is where I found out about it and how to use it on corners over 90 degrees.
Date published: 2015-06-23
Rated 4 out of 5 by Dave from Quick Helpful Tool Bought this for a cradle project that required 13 degree angle; this little protractor did the trick. Good tool to have in your shop. Scale is a little hard to read but seems accurate once set.
Date published: 2015-02-28
Rated 4 out of 5 by Graybeard from Good Product You wouldn't think so, but not everyone sells protractors anymore. I could not find them where school supplies are sold. It's a little small but that makes it easier to store in my tool box. When you need to set an angle it comes in handy.
Date published: 2014-07-22
Rated 5 out of 5 by RGR1 from A must for baseboard installs Remodeling of bathroom and basement living room calls for multiple angled cuts (nothing is square in your house) and I could not find my old protractor, lost in the garage. This basic protractor provides all the information you need, extremly accurate, less that .5 degree off perfect. Looked at digital (again) but the versatility of the digital angle finders was in question. This is the simple elegant solution at an amazing price, I’m glad to have one back in my shop.
Date published: 2018-05-07
Rated 4 out of 5 by OldGuy from Should be better This protractor does what it is supposed to do but it could be better with very little additional work. 1. The addition of markings to turn the stem into a ruler would help in not having to reach for another tool. 2. Another 1/64th off the indicator end of the shaft to clear the edge of the protractor. Otherwise, I expect this item to be passed down to future generations of users.
Date published: 2018-07-30
Rated 4 out of 5 by diyfer from Angle Cuts I needed to make some trusses so i needed a protractor that wasn't gonna break the bank! All the other protractors was kinda expensive in my opinion so i got this one....For the price you cant beat it & once you get it set its pretty accurate! I only gave it a 4 star cause it has a thin edge!
Date published: 2016-09-10
Rated 4 out of 5 by Jamie from Proteactor [This review was collected as part of a promotion.] Very useful tool and easy to use!! Little hard to keep tight when working angles but it worked fine for my project!
Date published: 2019-03-16
Rated 4 out of 5 by Shade from Good little protractor [This review was collected as part of a promotion.] Does a good job. Wish the metal was a bit thicker though.
Date published: 2019-11-26