Product selection from
FILTRETE
Flat Panel Air Filter, FPL00-2PK-24, 16 in x 20 in x 1 in (40,6 cm x 50,8 cm x 2,54 cm) 100 MPR, 2 Per Pack
Article #02095649
Model #FPL00-2CT CASE
Format 16x20x1" 2PK
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
Hassle-Free Returns
90 days to return or exchange in original condition and packaging.
Read Return Policy
Warranty
None
Description
- Outperforms fiberglass air filters for your furnace, air conditioner, or HVAC system
- For optimum performance, change filter every 90 days or sooner
- For residential use only
- Captures particles such as lint, dust, pollen, bacteria, viruses and pet dander
Product specifications
Brand/Model Compatibility
Filtrete
Filter Type
Non-HEPA
Carbon Filter
No
Charcoal Activated Carbon Filter
No
Height(cm)
40.64
Height(in)
16
Height(mm)
406.4
Length(cm)
50.8
Length(in)
20
Length(mm)
508.0
Removes Bacteria
No
Removes Dust
Yes
Removes Mold
Yes
Removes Odors
No
Removes Particulates
Yes
Removes Pet Dander
Yes
Removes Pollen
Yes
Removes Viruses
No
Series Name
N/A
Suggested Replacement Timeline
3 months
Warranty
None
Width(cm)
2.54
Width(mm)
25.4
Particles Removed From Air (Percentage)
5 Percentage
Width(in)
1
Flat Panel Air Filter, FPL00-2PK-24, 16 in x 20 in x 1 in (40,6 cm x 50,8 cm x 2,54 cm) 100 MPR, 2 Per Pack is rated
out of
5 by
84.
Rated 2 out of
5
by
Ed17 from
Terrible filter
Cheaply made filters. I've been buying this line of filters for years and these are absolutely ridiculously thin and flimsy; toilet paper thin and should be used as such.
Date published: 2023-12-16
Rated 4 out of
5
by
Keith R from
Good Value - Too much Cardboard
I just picked up an order of 12 filters: 12" X 36" Basic MERV 5.
I have not used them yet - but, when I do I'll write another review.
The picture on the retailer's website showed the Filtrete filters with no cardboard covering the front.
What I picked up, had lots of cardboard covering up the front. You would have to think that if 30% of the front of the filter is covered with cardboard that would not be a good thing.
I'll try to add a photo - but that function is greyed out. Maybe it will let me add a photo after I click on the "Complete" button?
Date published: 2023-08-24
Rated 1 out of
5
by
Bgman from
Design is Questionable
Major concern with mesh/plastic on opposite side of air flow. Concern with fibers going into furnace.
Date published: 2023-08-23
Rated 1 out of
5
by
LamontPhotos from
Flimsy new design
I have been using filtrate filters for years. The new design is getting sucked in to my energy efficient furnace. Does not happen in the regular furnace. There is not enough support for the filter. They need to go back to the old design. I will have to look into a different brand
Date published: 2023-02-18
Rated 1 out of
5
by
BobPez from
Flimsy beveled edge, won't buy again.
VERY disappointed with the new flimsy beveled edge design. Filters can distort in the filter duct and may get sucked into the fan. Sorry I bought a bulk pack and will not buy this product again. Unless Filtrete changes back to a sturdy box construction. Will use other brands with box frame from now on.
Date published: 2023-01-02
Rated 1 out of
5
by
clumpy from
New design is awful
I used to really like the Filtrete basic filters. The ones that had a full box (not tapered) cardboard frame, with the metal wiring in a criss-cross pattern across the back. They were sturdy and held together well over 3 months of use. With the full box frame, they also fit tightly in my vent grills, which was especially important for my upstairs ones in the ceiling.
They new design has a tapered frame and got rid of the wire mesh support and now uses a flimsy plastic support that is on the front-facing side -- NOT on the back facing the furnace, where the support should be in order to keep pieces of filter material from flowing into the furnace. Another problem with the new design is the plastic support material creates a super annoying whistling sound in some of my air intake vents.
If 3M does not go back to the former design and quality, I will be finding a new brand of filter to use in my home and all of my rental properties.
Date published: 2021-10-22
Rated 2 out of
5
by
Joe in Carson City from
BAD DESIGN
I bought two of these about Lamont ago so I would have them on hand and ready to go. Just got them out and noticed the air flow arrow. Others have commented it looks like it's going the wrong way. The other problem is because the cardboard frame is beveled or slanting out it does not go in the furnace easily and i think it would kink if forced. I am not going to take the chance of installing these and have one sucked into my fan. Money wasted and I won't buy again. I hope no one lost their job because of the air flow. Maybe they are working from home and are making them on the kitchen table. Seriously 3M should change back.
Date published: 2021-03-19
Rated 3 out of
5
by
JoyS from
new design
I do not like the new design of the 1085 filter that I bought today. It had a cardboard support across the back of the filter that is very flimsy and certainly will do nothing to prevent the filter from bending inward due to air intake from the heater. It may even rip and bits may get sucked into my heater. No thanks. I returned it. Thank goodness there were a few of the old style still in the store so I bought them. Please go back to the previous style without those cardboard supports.
Date published: 2021-02-13