Product selection from
ESTWING
Description
Estwing's lightweight construction pry bar has a beveled nail slot and it's construction gives added strength a lighter product while the rocking head provides maximum leverage.
- Fully forged and tempered for superb durability
- Beveled nail slots and rocking head easily remove embedded nails
- Sharp, polished blades ensure smooth operation
- Painted to resist corrosion
- Reinforced rocking head for maximum leverage
- Made in the USA
Product specifications
Width Measurement
1-3/4-in
Width(mm)
44.45
Color/Finish Family
Blue
Handle Material
Steel
Length(cm)
45.72
Length(in)
18.0
Length(mm)
457.2
Length Measurement
18-in
Material
Steel
Package Quantity
1
Series Name
N/A
Sub-Brand
N/A
Type
Wrecking bar
Width(cm)
4.445
Width(in)
1.75
You may also like
COUGAR
Garant Pro Crowbar with Pinch Point - 60-in x 1.5-in - Steel - Red
Format 60X1 1/4"
Details
Article #0123568
Pry Bar - Solid Steel - 18 In - Lightweight - Blue is rated
out of
5 by
21.
Rated 5 out of
5
by
Matt from
Better than standard flat bar any day
[This review was collected as part of a promotion.] Although it performs the same functions as a standard flat prybar (Wonderbar, etc.) the Estwing is much better for fine details. The ground edges are sharp enough to get behind trim and underneath tight nails, but also strong enough to hold an edge well. I was able to remove painted quarter-round from a hundred years ago with virtually no damage to the walls. The angled head is also much more solid than a bent bar, so striking with a hammer transfers much more energy to the chisel end with much less vibration or bounce. And it's much safer than your typical cat's paw, since both nail pullers are flat and can't dig into the surface as much. My first bar was stolen so I grabbed another and keep it locked up in my box now.
Date published: 2019-03-04
Rated 5 out of
5
by
Preston from
Handy little bar
[This review was collected as part of a promotion.] Good for getting into tight spaces. Quality American made.
Date published: 2019-09-12
Rated 5 out of
5
by
goose from
Sturdy, Sharp
[This review was collected as part of a promotion.] Much better than a typical crowbar. Sharp, sturdy. Used it to help rip out engineered hardwood glue-down floor
Date published: 2018-08-19
Rated 5 out of
5
by
SpaceCowboy from
Best pry bar ever
Amazing tool. Sharp yet flat teeth to grab nailhead and minimize damage on finish face of product Baseboard/drywall/lumber, etc... Can literally beat the heck out of it and stands the rest of time. Angle head is thin & narrow , fits into tough conditions and is long enough to provide decent leverage in tight areas. Love it ! Thanks Estwing
Date published: 2020-12-26
Rated 5 out of
5
by
Jake from
Estwing Wrecking Bar
[This review was collected as part of a promotion.] What can I say?? It’s an Estwing. I still wasn’t sure if it was gonna do the job, but it worked flawlessly! I had to remove sewer manholes which weigh a ton- thought it might bend or break, but it worked great. One tough wrecking bar
Date published: 2018-10-28
Rated 3 out of
5
by
KK from
Very Strong but not too thin for ripping up subflo
[This review was collected as part of a promotion.] Broke two flat bars ripping up a subfloor that someone used liquid nails to secure & had to use something stronger. This worked but was too thick to work its way under 1/2” subfloor and I had to junk it out.
Date published: 2019-08-17
Rated 5 out of
5
by
jaide from
The right size
[This review was collected as part of a promotion.] This wrecking bar is the right size for getting into tight spots and applying a little bit of leverage. A large crowbar has its place but will not fit where this jewel will.
Date published: 2019-11-01
Rated 5 out of
5
by
Jay from
Got the job done quick!
[This review was collected as part of a promotion.] We used this to pull up some engineered hardwood flooring over 300 square ft. Took us just a couple of hours and if we didnt have this, I might still be pulling it up.
Date published: 2018-10-22
Helpful Links
Customer Services
About RONA
