Product selection from DREMEL

Dremel Carbide Oscillating Tool Blade - 1 1/4-in W - Universal Quick Fit - Flush Cutting

Add to wish list

Dremel Carbide Oscillating Tool Blade - 1 1/4-in W - Universal Quick Fit - Flush Cutting

Article #19165117 Model #MM485 Format 1 1/4"

This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.

Add to wish list

Description

Slice through various hardened materials with this Dremel flush cut blade. It measures 1-1/2-in L x 1-1/4-in W x 3/64-in T. Durable and high-performing, this carbide flush blade stays sharp for a long time and provides a good cut-rate.

High performance flush cut bladeuprovides longest life and fastest cut of all Dremel flush cut blades
Universal Quick Fit blades are compatible with Dremel, Bosch, Makita, Milwaukee and Rockwell
High performance carbide teeth provide up to 30X life in hardened material vs. standard bi-metal oscillating blades
Universal Quick-Fit fits most oscillating tools without the use of an adapter

Product specifications

Application

Cutting

Type

Blade

Warranty

1-year limited

Blade Material

Carbide

Cuts Drywall

Yes

Cuts Ferrous Metal

Yes

Cuts Nonferrous Metal

Yes

Cuts Plastic

Cuts PVC

Cuts Tile

Yes

Cuts Wood

Yes

Item Disclaimer

In-use/lifestyle images-tools/accessories not included

Package Quantity

Sandpaper Grit

N/A

Sub-Brand

N/A

Rated 5 out of 5 by REW358 from Great tool! I needed a strong blade for various cuts while working a kitchen remodel. Ridgid blades working OK, but dulled quickly. Found this one, and decided to give it a try. It goes through anything I needed to cut! Still going strong after a month of daily use. Got a second one for a spare. Will not get any other kind from now on.

Date published: 2013-10-07

Rated 5 out of 5 by handy from works great [This review was collected as part of a promotion.] I have used this blade to cut cement board. you can make square cut for receptacle boxes for counter top back splashes very quickly and neatly. I also use this to cut tile, including the 1 inch glass and marble combo stuff. this blade cuts through the glass cleanly without chipping and it cuts through the marble as well. This may dull the blade but it is better than using a wet saw because it chips and breaks the glass. This is clean, quick and it is easier than cleaning a wet saw. I also use this blade on all kinds of metal and wood. This blade is a must have for an oscillating, multi tool.

Date published: 2020-04-21

Rated 5 out of 5 by Bill from Saves money in the long run I ready many reviews on this product. I agree that it is worth the money. The carbide tip does make a difference. it certainly lasts longer than the standard blade. The carbide "color" does wear off but the blade is still effective, I used it to trim window molding that protruded further out from the wallboard. Now the trim molding lies flat. My job was a lot of work but this blade really saved the day. Be careful to keep the blade level when trimming or you could trim deeper in areas that you did not intend to.

Date published: 2015-01-27

Rated 5 out of 5 by QC29 from Indestructible Used mine for more than a year. Cut through everything including cut nails, hardened steel screws! Hardwood soft woods, treated lumber - it does the job. It finally needs to be replaced and I will buy another. Pricey but worth it....

Date published: 2015-06-06

Rated 5 out of 5 by remodeler from Great for old work This blade is great for cutting drywall or plaster. Will cut through nails, metal lath, and even drywall screws.

Date published: 2013-10-27

Rated 1 out of 5 by KCMatt from TERRIBLE! Do not waste your money! I bought this to cut off some 1/8" capet tack strip anchors out of my floor. I managed to cut one off in about 20 seconds. I looked at the blade and half of the teeth had chipped off. This is the worst blade I have ever had the displeasure of using. For $20.00 I expected more.

Date published: 2013-09-27

Rated 5 out of 5 by Punch from Great blade • Dremel has provided me this product in exchange for an honest review. I tested the blade today on my lawn tractor. The hitch plate on the back had gotten bent and I was unable to straighten it out. It's approximately 16 gauge steel. The two sides had curled up. Still haven't figured out how or why, but I need to cut them off in order to use a new spreader I bought. I was amazed. I have a Dremel Velocity VC60. It cut through the steel like it was butter. The two cuts were about 2 inches long on the 16 gauge steel and it took me about a minute to make the two cuts. Have other plans for the blade and will do reviews as i do them. I highly recommend this blade.

Date published: 2021-05-11

Rated 5 out of 5 by John from Best blade yet! Have used to cut nails, bolts, PVC, wood, and it hasn't stopped yet.

Date published: 2015-04-29