Product selection from
DREMEL
Dremel 220-01 WorkStation- Small Drill Press, Rotary Tool Holder and Flex Shaft Holder
Article #332032615
Model #220-01
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
Hassle-Free Returns
90 days to return or exchange in original condition and packaging.
Read Return Policy
Warranty
1-year limited
Description
The Dremel 220-01 Workstation is a 3-in-1 tool; it's a drill press, rotary tool holder, and Flex Shaft tool stand. The Workstation is the perfect solution for stationary projects using your Dremel. Drill vertically or in any angle, adjustable in increments of 15 degrees. Hold the tool horizontally, up to 90 degrees; polish metal objects, sand different shapes, or grind metal pieces. The Workstation features an integrated Flex Shaft holder allowing telescopic adjustments to any height between 16 and 29 inches. The on-board accessory storage keeps your rotary bits organized and the cord management clips provide safe storage for power cords. The sturdy metal base with 4 clamping points securely holds your workpeice, while the base's inch and metric markings provide accurate measurements.
- Articulating drill press - drills perpendicular and angled holes in 15-degree increments, up to 90 degrees horizontal
- Tool holder - holds tool at 90 degrees horizontal for tasks such as polishing metal objects, sanding different shapes and grinding metal pieces
- Flex shaft tool stand - allows telescopic adjustment between 16 and 29 In. in height
- Crow's nest provides on-board storage for drill bits, wrenches, and other Dremel accessories
- Cord management clips - for safe storage of power cords
- Inch and metric marking on base - for accurate drilling of workpiece
Product specifications
Warranty
1-year limited
Type
Sanding and grinding guide
Country of Origin
China
Dremel 220-01 WorkStation- Small Drill Press, Rotary Tool Holder and Flex Shaft Holder is rated
out of
5 by
198.
Rated 1 out of
5
by
Lee 3D from
Does not work with an 8260
I bought an 8260 recently and this was the first accessory purchased to go with it. They are not compatible without forcing the rotary tool and damaging it or the workstation in doing so.
Date published: 2024-01-02
Rated 5 out of
5
by
Bee1 from
Like a third hand
[This review was collected as part of a promotion.] I bought this for precise work. It’s like having a third hand to help you get the project just right.
Date published: 2023-12-05
Rated 5 out of
5
by
Fallenangelks from
A must for crafters
[This review was collected as part of a promotion.] This has allowed me to precisely drill into projects that I've been working on without added stress of wondering if I'm going to make the whole and the correct spot.
Date published: 2023-12-04
Rated 5 out of
5
by
BlaiseW from
Good for micro work
[This review was collected as part of a promotion.] I use this thing all the time when I need to drill micro holes in something and also can turn 90 ° to make it a tool holder
Date published: 2023-11-21
Rated 5 out of
5
by
Keltab from
Super useful, steady, and stable!
[This review was collected as part of a promotion.] Just like you want your spouse to be! This is a very reliable addition to my carving tool family. It especially helps with my low vision/depth perception challenges. My work is better, and my fingers are safer!
Date published: 2023-09-29
Rated 5 out of
5
by
Tommy10Speed from
More than just a Drill Press
[This review was collected as part of a promotion.] I bought this for use as a drill press and it is great for that. I can drill into beads, shells, stones, etc. along with other materials such as wood, plastic, or metal with very small bits that will not work in my standard drill press. The fact that the "press" comes assembled with the gearing, springs, and lever inside of a protective case means that you do not have to mess around with it to make it work.
The workstation also allows for the rotary tool to be held stably at up to a 90-degree angle while I use both hands to hold a workpiece for buffing or sanding.
The workstation will also allow the tool to be hung while using the flexshaft for carving or grinding instead of vibrating off of my work bench.
Date published: 2023-09-25
Rated 5 out of
5
by
Rugalator Ray from
Great quality
[This review was collected as part of a promotion.] Bought this with the expectations of gettin a 4300 Dremel tool to install permanently in it. Been wanting this since I discovered it existed.
Have lots of projects awaiting it's use.
Date published: 2023-09-22
Rated 5 out of
5
by
Copter Doctor from
Very useful for small an detailed work
I've had this work station for so long that I forgot when I bought it. It's been at least 10 years. Making clamps and fences for it is easy and really adds to it's capability. I mounted mine to a piece of 3/4" plywood, as I have done with other similar size tools in my small workshop. The ply wood bases fit in a slot in my workbench.
Keep the tool close to the piece you are working on! The tool tip should be no more than 1/4" from the piece you are working on. Don't force it. Let the tool work at it's own speed. With the right jigs, you aren't limited to just drill bits. When you get used to the work station and setting the correct tool speed, you can do a lot, including sanding and edging.
Next, I'm getting the plunge router base.
Date published: 2023-07-20