Product selection from
DEWALT
DEWALT Impact Connect Copper Pipe Cutter Attachment
Article #00277957
Model #DWACPRIR
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
Hassle-Free Returns
90 days to return or exchange in original condition and packaging.
Read Return Policy
Warranty
3-year limited
Description
Transform your impact driver into a fast and powerful copper pipe cutter with the innovative Impact Connect copper pipe cutter attachment. Cut 4X faster and avoid the hassle of hand tools with an attachment that leverages the power of your existing impact driver. The revolutionary quick-change brace system attaches in seconds and allows you to seamlessly switch between cutting pipe and driving screws without additional interruptions. Send your productivity into overdrive with IMPACT CONNECT products that are designed to work with select DEWALT 20V MAX and other pro-grade 18V Impact Drivers.
- QUICK-CHANGE BRACE Seamlessly switch between cutting pipe and driving screws in seconds.
- MINIMIZE CUTTING EFFORT Requires 100X less cutting effort than a manual cutter to limit fatigue on long days
- 4x Faster Cuts- Maximize your cutting speed potential and avoid the hassle of hand tools
Product specifications
Warranty
3-year limited
Package Quantity
1
Type
Impact drill attachment
Series Name
NA
DEWALT Impact Connect Copper Pipe Cutter Attachment is rated
out of
5 by
60.
Rated 4 out of
5
by
Alanbig_1 from
Makes cuts easier.
[This review was collected as part of a promotion.] Works great on new installation or small repairs, cuts copper pipes fast and with no or low effort, the down side is that it's bulky and a bit bigger and feel akward when handling. But overall is a great product.
Date published: 2024-05-06
Rated 3 out of
5
by
Ric2020 from
Decent product.
[This review was collected as part of a promotion.] Its a nice tool, once installed on an impact it is very heavy. Once cutting the tool cuts very well minimal bur on the inside on the pipe, not bur on the outside of the pipe. Biggest complaint is the handle clamp does not fit around any attachments on the impact IE belt clip or bit holder. Occasionally the cutter slips on the pipe and takes a turn or two to engage and start cutting.
Date published: 2024-04-30
Rated 5 out of
5
by
Kdog from
Great accessory for anyone with multiple impacts!
[This review was collected as part of a promotion.] The connection between impact and accessory are fantastic. I used this on a small plumbing job in my home and it saved me a lot of time with clean cuts and less down time than a traditional copper cutter. As someone who owns multiple impacts, this fits seamlessly into my existing tools.
Date published: 2024-04-23
Rated 4 out of
5
by
BlAcKShEeP79 from
Convenient tool to have in a tight space.
[This review was collected as part of a promotion.] The cutter has great cutting speed. It has the convenient of changing out the three common sides. It’s good in tight spots and multiple cutting. It’s only good for the impact drills. It’s as big compare to the drill and as heavy.
Date published: 2024-04-23
Rated 5 out of
5
by
John B from
Another great product I didn't know I needed.
[This review was collected as part of a promotion.] I first thought the copper pipe cutter would be too bulky and heavy to be practical, but its usefulness outweighs any bulk and weight. I had no issues getting the rotating head into some fairly tight framing to cut old ¾" copper.
Assembly and use was pretty easy to figure out without looking at instructions. It fits my red brand drills and drivers perfectly after removing belt clip and bit holder, not a big deal - if I'm using this on a job, it will be in a dedicated drill/driver anyway.
Set up took less than 2 minutes.
Changing the cutter head takes about 3 seconds!
Each cut takes 4-5 seconds. Nice clean cuts!
Great tool.
Date published: 2024-04-22
Rated 4 out of
5
by
HandyD from
Efficient copper cutter
[This review was collected as part of a promotion.] This copper cutter definitely works and is up to the task of making all of your copper pipe cuts much easier than using a manual cutter. With some practice, it attaches to my impact driver pretty easily and quickly. I appreciate that both the 1/2" and 3/4" cutting wheels are included with the tool, and its easy and quick to change out the cutting wheels. I've used both sizes and so far no issues with any cuts. The attachment is somewhat bulky and quite heavy, but it does somehow still manage to fit into all the tight spaces. A nice feature is that the nose rotates 360 degrees and this helps with tight spaces and angles. Overall this is a very efficient solution for cutting copper pipe. For me the biggest drawbacks are the heavy weight of the attachment and that it takes an impact driver out of service if you are making frequent cuts. This is why I drop from 5 to 4 stars. For a few cuts, its a perfect solution. If I needed to make cuts all day long I would be more inclined to spend a bit more and purchase a dedicated powered cutting tool.
Date published: 2024-04-22
Rated 5 out of
5
by
Daniel1999 from
Time Saver!
[This review was collected as part of a promotion.] I had it on a few jobs and it made them a lot easier.sure if your limited to space this is not your tool but this was very easy to put on a impact driver that i had as a spare. it cuts pretty fast and leaves a decent edge i still de bur the copper.my only problem i had was the spring that locked the bar to the base the spring kept shooting out when taking it off tool here and there.
Date published: 2024-04-22
Rated 5 out of
5
by
Dane Gerous from
The tool I didn't know I needed!!!
[This review was collected as part of a promotion.] The tool I didn't know I needed!!! To my surprise this copper tube cutting tool worked quite well. cut 3/4" ridged copper fast and easy. I would assume it would do equally as well on 1" but did not include the attachment for that. It did include the 1/2" attachment but seemed to me to be overkill for that unless you are doing a bigger project. If you are going to use it regularly I would suggest an additional drill/driver so not to have to switch back and forth...
Date published: 2024-04-21