Product selection from DEWALT

DeWalt 12-in Circular Saw Blade - 80T Carbide Teeth - Fine Finish

Add to wish list

DeWalt 12-in Circular Saw Blade - 80T Carbide Teeth - Fine Finish

Article #00277443 Model #DWA11280 Format 12"x80TH

This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.

Add to wish list

Description

Make exceptional cuts with these large diameter circular saw blades that last up to 3x longer than other blades. Designed for improved finish quality, the blades feature optimized tooth geometry, specifically placed patented body slots and ultra-sharp carbide tipped teeth for crisp, clean cutting. Built to exceed expectations during cutting applications, each blade is specifically designed by tooth count to increase performance and life.

UP TO 3X Life
Patented Body Slot Design For Low Vibration
Optimized Tooth Geometry Designed For Increased Accuracy
Ultra Sharp Carbide For Clean Cutting
Precision Tensioning For Added Stiffness

Product specifications

Number of Teeth

Package Quantity

Rim Type

Standard tooth

Saw Blade Diameter

12-in

Series Name

DEWALT Large Diameter Saw Blades

Set/Individual

Individual

Sub-Brand

N/A

Type

Miter saw blade

Warranty

None

Wet/Dry Cut Capability

Dry cut only

Wood Cut Finish

Fine

Arbor Diameter

1-in

Base Warranty Labor(Months)

Base Warranty Parts(Months)

Blade Material

Tungsten carbide-tipped steel

Brand/Model Compatibility

Universal

Compatible with Benchtop/Stationary Saws

Yes

Compatible with Handheld Circular Saws

Compatible with Tile and Cut-Off Saws

Dado

Directional Setting

Single direction

For Use on Acrylic

For Use on Asphalt

For Use on Brick

For Use on Ceramic

For Use on Cinder Block

For Use on Composite Decking

Yes

For Use on Concrete

For Use on Fiber Cement

For Use on Glass

For Use on Granite

For Use on Laminate

For Use on Marble

For Use on Melamine

Yes

For Use on Metal

For Use on Non-Ferrous Metals

Yes

For Use on Plastic

Yes

For Use on Plywood

Yes

For Use on Porcelain

For Use on Slate

For Use on Vinyl

For Use on Wood

Yes

Rated 5 out of 5 by Jim from Excellent Miter Saw Blade Excellent blade for use in a chop saw to cut wood trim. Goes through oak like butter. Extremely smooth cuts that equal some of those much higher priced and highly rated blades you see advertised elsewhere. One caution...it has a 1" hole. My Dewalt Chop Saw has a 5/8" arbor. Dewalt claims that the bushing for the blade "stays with the saw." My stock Dewalt blade that came with the saw has a bushing that is either pressed in very tightly or is an integral part of that blade. You can order the bushing from Dewalt. You probably won't find it a Lowes or any other box store. I got one from Dewalt and that one definitely "stays with the saw." You may want to check yours to make sure it is removeable for reuse with this blade. I will definitely be keeping this blade for only cutting trim and finish work.

Date published: 2012-02-07

Rated 5 out of 5 by KevinB from 1" to 5/8" Arbor Bushing I read a comment that stated they needed a 5/8" bushing but the blade doesn't come with one and they couldn't get one anywhere at Lowes and that they had to go to Dewalt to get one. I found one on Amazon.com. They also offer different size bushings for just about anything. https://www.amazon.com/Freud-BL71MCE9-1-Inch-8-Inch-Bushing/dp/B00004RK8A/ref=sr_1_3?ie=UTF8&qid=1489937674&sr=8-3&keywords=12+inch+saw+blade+5+8+arbor

Date published: 2017-03-19

Rated 5 out of 5 by John from Producing Coin Holders [This review was collected as part of a promotion.] The Dewalt 12 inch 80 tooth blade did an excellent job of cutting the stock to make some twenty coin holders that were made as gifts. The cross cuts were smooth and accurate. In fact the cuts were so smooth that they required little sanding in preparation for the final finish. A great purchase.

Date published: 2019-11-25

Rated 2 out of 5 by KL from Disappointing Blade This is the very first Dewalt product I have ever been disappointed in. The blade deflects at the SLIGHTEST sideward pressure resulting in a cut that isn't square. When cutting a 45° angle on my Dewalt mitre saw with a 2x6 the blade will not go straight through without at least a 1/2 degree deflection resulting in a ruined cut. This is cutting soft cedar. I can't wait to cut white oak with it. My previous Dewalt blade did not do this

Date published: 2017-06-13

Rated 5 out of 5 by Dcmc from Laminate wood finishing blade. I'm putting laminate wood on my kitchen and hallway walls and needed a blade that would give me a smooth finish, every cut. This blade has exceeded my expectations. Highly recommend it. Dc, West Covina , CA

Date published: 2020-11-13

Rated 5 out of 5 by Gman from My choice of blade Once I started using the DeWalt brand blade I’ve never bought anything else! It holds it’s sharpness in any hardness of lumber.

Date published: 2021-04-26

Rated 4 out of 5 by Philip from Cuts pretty clean [This review was collected as part of a promotion.] Bought this to replace the 32T blade that came with my dual bevel sliding miter saw. It was chewing up anything crosscut, so I needed something that would make cleaner cuts. This blade did a pretty good job, only minor splits on the backside of the wood occasionally.

Date published: 2019-12-05

Rated 5 out of 5 by Jerc from Clean cut worthy of all finish wood work. Very clean cut. I am so glad that I purchased this saw blade. It performs better than expected.

Date published: 2021-11-28